Free Republic
Browse · Search
Bloggers & Personal
Topics · Post Article

Skip to comments.

How I Hacked An Electronic Voting Machine
Real Clear Science ^ | November 6, 2012 | Roger Johnston, Popular Science

Posted on 11/20/2012 7:49:50 PM PST by wannabegeek

What do you need to rig an election? A basic knowledge of electronics and $30 worth of RadioShack gear, professional hacker Roger Johnston reveals. The good news: we can stop it.

Roger Johnston is the head of the Vulnerability Assessment Team at Argonne National Laboratory. Not long ago, he and his colleagues launched security attacks on electronic voting machines to demonstrate the startling ease with which one can steal votes. Even more startling: Versions of those machines will appear in polling places all over America on Tuesday. The touchscreen Diebold Accuvote-TSX will be used by more than 26 million voters in 20 states; the push-button Sequoia AVC Voting Machine will be used by almost 9 million voters in four states, Harper’s magazine reported recently (subscription required). Here, Johnston reveals how he hacked the machines--and why anyone, from a high-school kid to an 80-year-old grandmother, could do the same.--Ed

The Vulnerability Assessment Team at Argonne National Laboratory looks at a wide variety of security devices-- locks, seals, tags, access control, biometrics, cargo security, nuclear safeguards--to try to find vulnerabilities and locate potential fixes. Unfortunately, there’s not much funding available in this country to study election security. So we did this as a Saturday afternoon type of project.

It’s called a man-in-the-middle attack. It’s a classic attack on security devices. You implant a microprocessor or some other electronic device into the voting machine, and that lets you control the voting and turn cheating on and off. We’re basically interfering with transmitting the voter’s intent.

We used a logic analyzer. Digital communication is a series of zeros and ones. The voltage goes higher, the voltage goes lower. A logic analyzer collects the oscillating voltages between high and low and then will display for you the digital data in a variety of formats. But there all kinds of way to do it. You can use a logic analyzer, you can use a microprocessor, you can use a computer--basically, anything that lets you see the information that’s being exchanged and then lets you know what to do to mimic the information.

So we listened to the communications going on between the voter, who in the case of one machine is pushing buttons (it’s a push-button voting machine) and in the other is touching things on a touchscreen. Then we listened to the communication going on between the smarts of the machine and the voter. Let’s say I’m trying to make Jones win the election, and you might vote for Smith. Then my microprocessor is going to tell the smarts of the machine to vote for Jones if you try to vote for Smith. But if you’re voting for Jones anyway, I’m not going to tamper with the communications. Sometimes you block communications, sometimes you tamper with information, sometimes you just look at it and let it pass on through. That’s essentially the idea. Figure out the communications going on, then tamper as needed, including with the information being sent back to the voter.

We can do this because most voting machines, as far as I can tell, are not encrypted. It’s just open standard format communication. So it’s pretty easy to figure out information being exchanged. Anyone who does digital electronics--a hobbyist or an electronics fan--could figure this out.

The device we implanted in the touchscreen machine was essentially $10 retail. If you wanted a deluxe version where you can control it remotely from a half a mile away, it’d cost $26 retail. It’s not big bucks. RadioShack would have this stuff. I’ve been to high school science fairs where the kids had more sophisticated microprocessor projects than the ones needed to rig these machines.

Because there’s no funding for this type of security-testing, we relied on people who buy used machines on eBay [in this case the touchscreen Diebold Accuvote TS Electronic Voting Machine and the push-button Sequoia AVC Advantage Voting Machine]. Both of the machines were a little out-of-date, and we didn’t have user manuals and circuit diagrams. But we figured things out, in the case of the push-button machine, in under two hours. Within 2 hours we had a viable attack. The other machine took a little longer because we didn’t fully understand how touchscreen displays worked. So we had learning time there. But that was just a couple days. It’s like a magic trick. You’ve got to practice a lot. If we practiced a lot, or even better, if we got someone really good with his hands who practiced a lot for two weeks, we’re looking at 15 seconds to 60 seconds go execute these attacks.

The attacks require physical access. This is easy for insiders, who program the machines for an election or install them. And we would argue it’s typically not that hard for outsiders. A lot of voting machines are sitting around in the church basement, the elementary school gymnasium or hallway, unattended for a week or two before the election. Usually they have really cheap cabinet locks anyone can pick; sometimes they don’t even have locks on them. No one signs for the machines when they show up. No one’s responsible for watching them. Seals on them aren’t much different from the anti-tamper packaging found on food and over-the-counter pharmaceuticals. Think about tampering with a food or drug product: You think that’s challenging? It’s really not. And a lot of our election judges are little old ladies who are retired, and God bless them, they’re what makes the elections work, but they’re not necessarily a fabulous workforce for detecting subtle security attacks.

Give people checking the seals a little training as to what to look for, and now they have a chance to detect a reasonably sophisticated attack. Do good background checks on insiders, and that insider threat would be much less of a concern. Overall, there’s a lack of a good security culture. We can have flawed voting machines, but if we have a good security culture, we can still have good elections. On the other hand, we can have fabulous machines, but if the security culture is inadequate, it doesn’t really matter. We’ve really got to look at a bigger picture. Our view is: It’s always going to be hard to stop James Bond. But I want to move it to the point where grandma can’t hack elections, and we’re really not there.

Read more about elections security here.

TOPICS: Computers/Internet; Conspiracy; Government; Politics
KEYWORDS: diebold; electionfraud; hacking; rig; votefraud; voterfraud
Also URL at

I hope this post will survive... :-)

1 posted on 11/20/2012 7:49:53 PM PST by wannabegeek
[ Post Reply | Private Reply | View Replies]

To: wannabegeek


We built several hundred voting machine tables for a large suburban county recently, each holds 3 machines while they are in the quarantine warehouse. We were allowed access to touch-up paint etc. after delivery. I wondered what a James Bond might have been able to achieve...

Fortunately, ours is a solid red state.

2 posted on 11/20/2012 8:10:25 PM PST by One Name (Ultimately, the TRUTH is a razor's edge and no man can sit astride it.)
[ Post Reply | Private Reply | To 1 | View Replies]

To: wannabegeek

Before an election, voting machines are supposed to be locked in a room with only the sheriff having a key. If he is on the ballot, the county judge has the key. The machines are delivered to polling places by law eforcement where the election judge is responsible for the safety of the machines.

It sounds like the people with legal control over the safety of the machines, is where the breakdown is. These electronic guys should never be near a machine unless they are voting. Voting machines should never be out in the open where people could get to them. The county is the culprit here by not following the law regarding safety of voting machines.

3 posted on 11/20/2012 8:26:32 PM PST by Marcella (When the people find that they can vote themselves money, that will herald the end of the republic.)
[ Post Reply | Private Reply | To 1 | View Replies]

To: wannabegeek
Florida Voting Machine

4 posted on 11/20/2012 8:37:23 PM PST by Jack Hydrazine (It's the end of the world as we know it and I feel fine!)
[ Post Reply | Private Reply | To 1 | View Replies]

To: Jack Hydrazine

I see no problem with that machine.

5 posted on 11/20/2012 8:54:10 PM PST by cableguymn (The founding fathers would be shooting by now..)
[ Post Reply | Private Reply | To 4 | View Replies]


6 posted on 11/20/2012 9:13:44 PM PST by phockthis ( ...)
[ Post Reply | Private Reply | To 1 | View Replies]

To: Marcella

“It sounds like the people with legal control over the safety of the machines, is where the breakdown is.”

Or if you are in a precinct in Philadelphia, you just physically push the court appointed Republican election judge out the door and do whatever you want. You might even invite the Black Panthers standing outside to come inside for a moment to have a toke and restore order.

7 posted on 11/20/2012 9:21:35 PM PST by Avid Coug
[ Post Reply | Private Reply | To 3 | View Replies]

To: wannabegeek

I had a sudden vision of someone coming up with an arcade game “Hack the Election” — you think that’ll catch on? Could be single-player or multiple-player mode. Watch the kids line up with their rolls of quarters.

8 posted on 11/20/2012 9:30:22 PM PST by thecodont
[ Post Reply | Private Reply | To 1 | View Replies]

To: cableguymn; Jack Hydrazine
I see no problem with that machine.

Actually it's the reverse. Who have access to the voting machine? The planted Diebold people and gov't personnel SEIU members who always favor *rats, very unlikely they would rig the machine for GOPs.

9 posted on 11/20/2012 10:38:14 PM PST by hamboy (Psalm 109:8: Let his days be few; and let another take his office.)
[ Post Reply | Private Reply | To 5 | View Replies]

To: wannabegeek

Unfortunately the politician this guy was working for was a Republican.


Computerized voting machines and networks INVITE fraud. There is no high tech solution to this. High tech solutions just inspire high tech workarounds.

Low tech is the only solution. Use only hand marked/punched paper ballots and count the ballots with machines that are mechanical (electric motors are OK) and maybe optical, with NO programmable components and NO networking.

10 posted on 11/20/2012 11:17:42 PM PST by TChad
[ Post Reply | Private Reply | To 1 | View Replies]

To: TChad

“Low tech is the only solution”

We saw low tech during the 2000 hanging chad fiasco. There will be cheating no matter what system is in place. The opposition is immoral and believes the ends justify the means. Wherever they control the local board of elections there will be fraud.

11 posted on 11/21/2012 2:14:28 AM PST by Soul of the South
[ Post Reply | Private Reply | To 10 | View Replies]

To: Soul of the South
We saw low tech during the 2000 hanging chad fiasco...

... in which the vast majority of ballots did not have hanging chads and so were probably counted correctly. That low tech system is vastly better than a hackable computerized voting system (and they are all hackable) that ensures that we cannot be confident that ANY votes are counted correctly.

The opposition is immoral and believes the ends justify the means.

Which just means that we need plenty of Republican poll workers. Also, it means that a voting system should be in place that will give those workers a good chance of detecting fraud. They sure won't detect the hacker who uses a network to replace the vote tabulation software in a large number of voting machines on the night before the election. They do have a decent chance of detecting simple, visible election fraud such as replacing one box of ballots with another.

Wherever they control the local board of elections there will be fraud.

Wherever they control the computerized voting machines and networks, they can get away with fraud that is almost impossible to detect.

Keep computers away from votes.

12 posted on 11/21/2012 7:56:02 PM PST by TChad
[ Post Reply | Private Reply | To 11 | View Replies]

Disclaimer: Opinions posted on Free Republic are those of the individual posters and do not necessarily represent the opinion of Free Republic or its management. All materials posted herein are protected by copyright law and the exemption for fair use of copyrighted works.

Free Republic
Browse · Search
Bloggers & Personal
Topics · Post Article

FreeRepublic, LLC, PO BOX 9771, FRESNO, CA 93794 is powered by software copyright 2000-2008 John Robinson