Skip to comments.Retro Populator Turns Your 3D Printer Into an Electronics Manufacturer
Posted on 08/04/2014 12:29:49 AM PDT by 2ndDivisionVet
When will 3D Printers be able to build electronic devices from the ground up? Thats a question many within the 3D printing space have been pondering for some time. Some experts feel as though it is only a decade away, while others think it could be a lot longer. Without a doubt, when this happens, it will change the world in ways that we could never imagine.
Close your eyes and think about all the electronic devices that you use on a daily basis. There are smartphones, TVs, PCs, home lighting, automobile key fobs, and the list goes on. Now imagine being able to 3D print some of these things, including the electronics, all on one machine. The world would become a much more productive place to live in, although there would certainly be many legal and intellectual property issues to deal with.
No worries though, this probably wont be occurring anytime in the near future, right? Well, if a man named Eric Boyd has anything to say about it, we may be closer than it seems.
Boyd has created a pick-n-place add-on for 3D printers, which will allow your 3D printer to created working printed circuit boards (PCBs). Pick-n-place machines have been around for quite a while. What they do is pick up surface-mount devices (SMDs) and place them onto printed circuit boards. They are efficient, precise, and very quick in doing so. They have the ability to place electronic components such as capacitors, integrated circuits, and resistors onto the correct spots on a circuit board.
Boyds add-on, which he calls the Retro Populator can easily be attached to a 3D printer, utilized, and then quickly removed.
The (Retro Populator) is a pin plate with attached tape rails that slides into 3D printers, Boyd told 3DPrint.com. There is also a small mechanism which holds the vacuum syringe on the extruder head, and another small mechanism that adjusts the z-stage rezero height. The idea being that you can retrofit it into any 3D printer in about 2 minutes, do your pick n place, and then take it back out again, 3D printer unchanged.
Just as important as the actual Retro Populator hardware, is the software which Boyd has also created. His motivation for creating this add-on comes from how tedious he has found the process of manually placing parts onto circuit boards. It requires good vision as well as great manual dexterity.
Boyd has plenty of improvements planned for his Retro Populator. Version 1.0 of the project is his first go at things, which you can see in action below:
v1.0 does not support paste extrusion, part rotation, or tape advancement basically, you can lay your parts out as you need them to be oriented on your circuit board, and move them to the right places, but youll need to do the orientation stuff yourself, as well as the solder paste, and even the tape cover peeling, Boyd told us.
Boyd also has plans for the creation of Version 2.0 and 3.0 of the Retro Populator. Version 2.0 is currently in the planning and design process, and will allow a second nozzle to dispense solder onto the boards. It will also add either part rotation or paste extrusion (he is still undecided), and then in version 3.0 the other of the two features will be added. The idea in ALL versions is to avoid any electronic changes or interfaces with the 3D printer, Boyd told us. We might have our own simple electronics, but well never interface with the printers because that would make retrofitting so much harder.
Below is a video, where Boyd explains a little more about the Retro Populator:
Boyd told us that he plans to begin selling these sometime at the end of this year or the beginning of next. There will be several purchasable stages, starting at the v1.0 kit. The v1.0 kit is really just some machined plastic bits and a syringe needle + tube, so were thinking itll end up at something like $99, but we havent done the cost calculations yet, he said.
Without a doubt this takes us one step closer in the quest to be able to fully print out electronic devices. Is this the final step in the process? Absolutely not. However, it is one step in the right direction.
What do you think about the Retro Populator? Would you have any interest in turning your 3D printer into a pick-n-place machine? Discuss in the Retro Populator forum thread on 3DPB.com. In the video below you can see Boyd explaining how to set the Retro Populator up on an Ultimaker 3D printer.
Wish my brain could keep up!
Disclaimer: Opinions posted on Free Republic are those of the individual posters and do not necessarily represent the opinion of Free Republic or its management. All materials posted herein are protected by copyright law and the exemption for fair use of copyrighted works.