Free Republic
Browse · Search
General/Chat
Topics · Post Article

To: rarestia
220? 600V on the anode of a 6146A at RF frequencies.

That'll set your teef on edge, if you have 'em.

DISCLAIMER: Relying on the bounce off the wall/ceiling to restart your heart is contraindicated. High voltage is dangerous. Batteries not included. Your mileage may vary.

/johnny

5 posted on 11/27/2012 12:49:53 PM PST by JRandomFreeper (Gone Galt)
[ Post Reply | Private Reply | To 2 | View Replies ]


To: JRandomFreeper
'6146A at RF frequencies' Stop!!! You're killing me.
11 posted on 11/27/2012 1:18:09 PM PST by ImJustAnotherOkie (zerogottago)
[ Post Reply | Private Reply | To 5 | View Replies ]

To: JRandomFreeper

6146’s! These ops who run solid state amps don’t know the
fun they are missing. Peak, dip, peak, dip. Or better
still, having the dipole antenna you made come out 1:1 SWR
at the frequency you cut it for, first time.

Mike N8KAH


17 posted on 11/27/2012 3:49:05 PM PST by doublecansiter (without cartridge, load in nine times, LOAD!)
[ Post Reply | Private Reply | To 5 | View Replies ]

To: JRandomFreeper

Oh yeah. Done the B+ boogie more than once.


18 posted on 11/27/2012 3:53:22 PM PST by RFEngineer
[ Post Reply | Private Reply | To 5 | View Replies ]

To: JRandomFreeper

I got bit by the undischarged plate voltage filter cap for my 813 final once.

When the supply was on, that was 2500VDC.

I don’t remember much, but the imprint I left in the hollow core door behind me showed that I hit it pretty hard.


20 posted on 11/27/2012 9:40:44 PM PST by NVDave
[ Post Reply | Private Reply | To 5 | View Replies ]

To: JRandomFreeper
20? 600V on the anode of a 6146A at RF frequencies.

That'll set your teef on edge, if you have 'em.

Lessee. 435VDC at 150. Tailor made. But we only need 145 ...

24 posted on 11/28/2012 1:21:07 AM PST by cynwoody
[ Post Reply | Private Reply | To 5 | View Replies ]

Free Republic
Browse · Search
General/Chat
Topics · Post Article


FreeRepublic, LLC, PO BOX 9771, FRESNO, CA 93794
FreeRepublic.com is powered by software copyright 2000-2008 John Robinson