Posted on 05/16/2010 12:05:07 PM PDT by Ernest_at_the_Beach
Late on Friday night BP began to try inserting a narrow pipe into the remnant of the riser lying on the sea bed at the site of the Deepwater Horizon site in the Gulf of Mexico. Because there is a better illustration of the process that they are using, I am adding this as a separate post, rather than an addendum to the last one on this topic.
UPDATE: The pipe was apparently successfully inserted, but an accident with a couple of ROV's knocked it back out, so that it will be another nine hours before it can be reconnected. (H/t lowtech architect.)
UPDATE 2: The pipe has been reinserted successfully
Technicians have fully inspected the system and have re-inserted the tool. The tool is fashioned from a 4-inch pipe and is inserted into the leaking riser, from which the majority of the flow is coming. While not collecting all of the leaking oil, this tool is an important step in reducing the amount of oil being released into Gulf waters. The procedure - never attempted before at such depths - involves inserting a 5-foot length of the specifically-designed tool into the end of the existing, damaged riser from where the oil and gas is leaking. In a procedure approved by federal agencies and the Federal On Scene Coordinator, methanol will also be flowed into the riser to help prevent the formation of gas crystals, known as hydrates. Gas and oil will then flow to the surface to the Discoverer Enterprise drillship.
(H/t xazp).
The initial attempt to get the "needle" into the pipe was called off when the equipment shifted in the supporting frame. It is, however back on the seabed, and the attempt to insert it, collect the oil and gas, and bring it to the surface should start later this evening.
The problem arose because the pipe that will carry the oil and gas back up to the ship at the surface (which they confusingly also call the drill pipe) has to mate with the insertion tool which is held in the frame (I imagine this includes the buoyancy module shown) at the seabed. It was the connection of the drill pipe to the ship that could not be made, so they took the assembly back to the surface, and fixed the problem. They are now (late Saturday afternoon) getting ready to make an insertion into the broken riser. The drill pipe is to be "stabbed into" the frame, and the intent is to eliminate any water getting into the connection, to eliminate the hydrate problem.
At the moment they have also started a continuous injection of dispersants underwater, after the three tests were judged to be successful. This has reduced the work needed to control the oil spread on the surface. They pointed out today that the dispersants that they are using were pre-approved before the spill. Distribution of these dispersants had been approved in a more limited application (on the surface), but after the tests were successful, distribution is now approved for use underwater - which actually reduces the amount needed since it is injected into the heart of the spill, rather than spread over the surface after the oil has migrated upwards.
They are, however, becoming a little more concerned about the weather, since changing conditions have made it more difficult to control the spill, since it is currently too rough for skimming and controlled burns - though that may improve in the next couple of days.
They are running the riser and blowout preventer (BOP) on the first relief well today (it is already about half-way down to total depth (TD)), and they should spud the second relief well almost immediately.
Let me close by noting that in the press briefing, Secretary Salazar repeated the line used by Secretary Chu in the past, that his folks are "the smartest people on the planet!" Sigh! Even if they are, you cannot bring folks up to speed on all the ramifications and complexities of deepwater oilfield technologies in a couple of days. It is a blindness to reality, I have commented on before, but let me get off that soap box.
If interested .....the meat is often in the comments......
Good morning...just went thru the comments...they may have it going if one of the last comments is up to date.
http://www.chron.com/disp/story.mpl/business/deepwaterhorizon/7006870.html
BP officials said this afternoon that a small tube was successfully siphoning oil and gas from the underwater wreckage of the Deepwater Horizon rig, but could not say how much oil it was pumping.
The four-inch tube was successfully threaded this morning into the 21-inch riser pipe that once connected the drilling rig with a well nearly a mile below the surface of the Gulf of Mexico. The successful insertion followed two mistrials since robots first tried to thread the riser on Saturday. BP officials stopped short of calling it an unqualified success and say they are still working on backup plans that include a replacement insertion tube, should this one fail.
The success followed two mistrials with the mile-long tube, one overnight and one Saturday.
This is analagous to the rescue of Apollo XIII. If they succeeed, they deserve great credit. And looking forward, it ought to result in much better designs for
off-shore rigs and deep-sea extraction. Assuming success, the next step is capturing all that water-oil mix.
This is like war, a war in which our government is doing nothing except screaming from the sidelines.
Update on Riser Insertion Tube Tool progress>
Source is the :
Interesting analogy....not sure they will get any deserved credit though.
Eh, didn’t President Reagan once say something about the best minds not going into government. The real talent is not in the EPA, it’s making mid-six figures with BP, XOM, etc. Aside from the military and law enforcement, the government tends to attract folks who are 2d raters...at best.
MEDIA ADVISORY: BP to hold media briefing in Houston
WHEN: 1:30 p.m. CDT, Sunday, May 16
Did any of the oil execs say “I drink your milkshake”.
Question for the engineers: why only e 4-5 inch insertion tube? is this test to see it first or is the max ?
Disclaimer: Opinions posted on Free Republic are those of the individual posters and do not necessarily represent the opinion of Free Republic or its management. All materials posted herein are protected by copyright law and the exemption for fair use of copyrighted works.