Cold Fusion Demonstration During MIT Short Course

From January 23 to 31, MIT Electrical Engineering Prof. Peter Hagelstein conducted a course on cold fusion at MIT. “Cold Fusion 101: Introduction to Excess Power in Fleischmann-Pons Experiments” was part of MIT’s Independent Activities Period (IAP), during which students can take credit or non-credit courses in a variety of subjects (some, like cold fusion, not offered as part of MIT’s regular course selection).

Five MIT students attended the course, four of whom had been students of Hagelstein’s. Another 15 or so individuals from outside MIT were also in attendance. During the first week, Hagelstein provided a theoretical and experimental overview of the cold fusion field, with lectures focusing on (but not limited to): excess power in Fleischmann and Pons’ early experiments; claim of energy production without chemical or nuclear products; theoretical difficulties and overview; hydrogen/deuterium evolution reactions and electrochemical models; excess power as a function of loading; vacancies and codeposition; the nuclear ash problem; correlation of He-4 with excess power; excess power in the NiH system.

For the final two days of the course on January 30 and 31, Dr. Mitchell Swartz spoke to the class about experimental lattice-assisted nuclear reaction/cold fusion (LANR/CF) systems, including those engineering modifications discovered by JET Energy, Inc. and other groups for controlling and increasing the excess heat obtained from activated CF/LANR devices. On January 30, Swartz presented a broad background covering LANR/CF aqueous, gas, and nanomaterial systems. He began with discussions of the evolution of CF/LANR developments starting with thermometry, calorimetry, and the control standards and engineering used to actually determine the activity of a driven LANR/CF material. This led up to presentations of excess heat and generated electricity from aqueous (nickel and palladium) systems, from codepositional and nanomaterial systems. Swartz stated, “The emphasis was to transfer to them the pattern recognition used to recognize active CF/LANR systems and materials. On that background came improvements that led to marked increases in activity like Optimal-Operating-Point control and metamaterial JET Energy PHUSOR® cathodes.” His final emphasis that day was on the mathematics and developments that led to the more successful results with paired Stirling engines and electricity producing systems.

After presenting background on nanomaterials in general, Dr. Swartz led the class back to Prof. Peter Hagelstein’s lab, where a “Series 6 NANOR™” experimental run was already underway. Like its 2003 (ICCF10) predecessor demonstration at MIT, this NANOR-inspired device also showed excess heat, which was monitored three ways by class members. Swartz reported, “The group watched as the cold fusion demonstration performed like the Energizer Bunny, producing excess energy which appeared on the meters and computer graph in front of them, from the production of de novo helium-4 from deuterons.” These results were analyzed by the class the next day. One of the confirmatory measurements from the first day of the open demonstration of CF/LANR at MIT during the course is in Figure 1.

Swartz explained the curves: “Shown in Figure 1 are the incremental increase in temperature normalized to be input electrical power, for both the ohmic control and the NANOR, and the input electrical power to each. The graph shows first the response of the ohmic control, and then the response of the NANOR. It can be seen that despite lower input electrical power to the NANOR, the incremental temperature differential observed in the core was higher than expected, as compared to the ohmic control. The graph heralds the great efficiency and the excess power gain of the cold fusion/LANR NANOR device.”

On January 31, Swartz focused on CF/LANR nanomaterials, including recent developments on how to better handle and activate them. He concluded with several types of new NANOR results, including the results from the group’s previous day experimental CF/LANR run. This cold fusion demonstration had an average energy gain (COP) of 14.12 over the several hours that were observed (and which followed).

Swartz noted, “The duty cycle was split with half going to a control portion consisting of a carefully controlled electrical DC pulse into an ohmic resistor which was used to thermally calibrate the calorimeter. For the entire month of February, the NANOR continued to produce excess energy, with daily calibrations against an ohmic thermal control; thus, it also confirmed the existence of CF/LANR daily during that time.”

Compared to the 2003 MIT CF/LANR demonstration, the new calorimeter shown at the lab also had additional monitoring diagnostics “for improved verification, such as the measurement of heat flow, to thereby provide for three independent ways of monitoring excess heat semiquantitatively compared to a thermal ohmic control. The excess heat, which the NANOR demonstrated, was monitored three ways.” Swartz and others at JET Energy created a unique calorimeter and driving system whose unique design was its driving configuration and implementations which were made especially for portability to MIT along with other features. Swartz noted that, compared to the 2003 demonstration at MIT, this second demo had improvements of size, response time, diagnostics and output energy. The current set-up was designed to run at low power input levels to increase the likelihood of longer runs and safety at the educational institution for its month-long stay.

Swartz expounded on the improvements over the 2003 demo: “First, the 2012 IAP demo has used an entirely new, more reproducible configuration of cold fusion. It showed a significant improvement over the previous demonstration because it was composed of an entirely new line of CF/LANR nanomaterials. At its core is a specially prepared CF nanomaterial developed by JET Energy, and constructed into a NANOR which is a member of the sixth generation of these mini CF/LANR devices which certainly appear to have a place in the future of cold fusion. Second, and most importantly, the NANOR used in the January IAP demonstration had a much higher energy gain compared to the 2003 demonstration unit [energy gain 14.1 in 2012 vs. energy gain ~2.7 in 2003]. The current NANOR series have had higher power gain (to beyond 30) and energy gain (to 16) levels, but the group was quite satisfied with a COP of 14 for hours. Third, another unique quality of the NANOR is precise, safer containment. In this case, the mini-sized NANOR is a sixth generation CF/LANR device, and it is smaller than a few centimeters, with an active site less than a gram. Fourth, in the case of the sixth generation NANORs, unlike the others, the pre-loaded devices can be simply electrically driven. The activation of this cold fusion reaction is, for the first time, separated from its loading. In every other system known—Fleischmann and Pons, Arata, Miles and others—the loading was tied to activation. The next step with the NANOR research is to increase input power, energy production density and temperature.”

The NANOR on display during the IAP course at MIT in January had been giving out excess heat since the beginning of January, through February 2012. Also worth noting, the 2003 demo set-up needed two full tables, whereas the new 2012 NANOR demo needed only a single standard sized desktop (with most of the space taken up by a computer and meters, not the device itself). In addition, the new calorimeter was cycleable in hours rather than requiring an entire day, making it applicable to the MIT course.

Hagelstein said of the NANOR experiment, “I like the approach. It is a bulk effect. The whole NANOR is participating, whereas the Pons and Fleischmann experiment was only active at the surface. This is important because you don’t want to have a process that destroys your host.”

Good thinking. The IBM trick is to cut an atom sized hole in a fixed matrix ~ at the atomic level. That is a really really really neat trick ~ which does mean that we are at the level of control of matter that it is feasible to consider custom built non-molecule ~ molecules.

My candidate for the anode is one of those iron hydride anodes in current use in high energy (or long life) rechargeable batteries.

Almost needless to say my wife has said NO to any table-top experiments with rigging them up to any sort of hydrogen gas feed.

She said "You are not allowed to blow us up"

"Good thinking. The IBM trick is to cut an atom sized hole in a fixed matrix ~ at the atomic level. That is a really really really neat trick ~ which does mean that we are at the level of control of matter that it is feasible to consider custom built non-molecule ~ molecules."

Which is why I find the tech so interesting. It will allow access to "structures" smaller than photolithography can generate, if the "critical dimensions" to make whatever sort of "quantum cage" is causing the LANR effect to happen need to be in such a size range.

Science (and technology) is SUCH fun! That it is also useful for improving our lives is "just gravy". I suspect that our prehistoric technological forebears felt the same joy while figuring out how to chip flint and "make fire"___________"Wow....look at THAT, woudlya!"!"

Cold fusion reaction still going.

From PESWiki:

http://peswiki.com/index.php/News

Cold Fusion 101 Demo Still Going (no link; just a quick f.y.i.) - I talked with Dr. Mitch Swartz (Jet Energy) yesterday, and he said that his demo that he did for the “Cold Fusion 101” class is still running, and has been doing so continuously for two months, at 7-times overunity. — (Sterling D. Allan; March 20, 2012)

Disclaimer: Opinions posted on Free Republic are those of the individual posters and do not necessarily represent the opinion of Free Republic or its management. All materials posted herein are protected by copyright law and the exemption for fair use of copyrighted works.