Free Republic
Browse · Search
News/Activism
Topics · Post Article

Skip to comments.

First Liberator Spotted In The Wild?
The Truth About Guns ^ | 10 May, 2013 | Nick Leghorn

Posted on 05/13/2013 3:59:00 PM PDT by marktwain

BJ3oEpCCUAAS-lf

Found this over on DefDist’s twitter feed, and it appears to be a Liberator printed in New Hampshire. The first of many, I’d bet.

(Excerpt) Read more at thetruthaboutguns.com ...


TOPICS: Constitution/Conservatism; Government; News/Current Events; US: New Hampshire
KEYWORDS: 3dprinted; banglist; liberator; nh
Worth noting that some are starting to print liberators.
1 posted on 05/13/2013 3:59:01 PM PDT by marktwain
[ Post Reply | Private Reply | View Replies]

To: marktwain
Photo & Video Sharing by SmugMug
2 posted on 05/13/2013 4:01:33 PM PDT by SWAMPSNIPER (The Second Amendment, a Matter of Fact, Not a Matter of Opinion)
[ Post Reply | Private Reply | To 1 | View Replies]

To: marktwain
I expect to see a collective thumb in the eye of the statists over this. Trying to control Americans is like trying to herd catz.

/johnny

3 posted on 05/13/2013 4:02:26 PM PDT by JRandomFreeper (Gone Galt)
[ Post Reply | Private Reply | To 1 | View Replies]

To: marktwain

You know part of me wants to point out that that is not a very cool looking gun or something like that...

But what that picture really does is make me grin from ear to ear with pride.


4 posted on 05/13/2013 4:09:50 PM PDT by chris37 (Heartless.)
[ Post Reply | Private Reply | To 1 | View Replies]

To: SWAMPSNIPER

"First Joe was like, "Pew!" then I was like, "Pew! Pew! Pew!"

5 posted on 05/13/2013 4:14:14 PM PDT by Joe 6-pack (Qui me amat, amat et canem meum.)
[ Post Reply | Private Reply | To 2 | View Replies]

To: marktwain

You can go to the cabela’s web site and order a real handgun, colt 1851, and have it sent to your house. No questions asked. A .44 cal colt 1851 is a seriously scary gun. Why mess with this toy?


6 posted on 05/13/2013 4:18:12 PM PDT by central_va (I won't be reconstructed and I do not give a damn.)
[ Post Reply | Private Reply | To 1 | View Replies]

To: marktwain

I don’t need one. I don’t want one. But the more Americans there are who print one (or dozens!), the safer I’ll feel. Go ahead, Obama/Schumer/Pelosi, see if you can track everyone who has met anyone who had access to a 3-D printer. Perhaps we can move away from “prior restraint” laws that attempt to control crime by limiting law-abiding citizens and move to a sensible model of punishing and imprisoning violent criminals who use guns against the innocent.


7 posted on 05/13/2013 4:19:00 PM PDT by Pollster1 ("Shall not be infringed" is unambiguous.)
[ Post Reply | Private Reply | To 1 | View Replies]

To: central_va
If all you're after is fire power you've never faced a resolute tyranny. They'll bring out their detection devices to search your property ~ front yard, backyard, gardens, orchards ~ everywhere.

That's what they did in Scotland ~ which is why most Scots live in America ~ their ancestors got government paid voyages!

This gun is hand-size ~ which is good ~ and it's essentially undetectable by today's best sensors.

No doubt the designs will improve with use of this new technology, and eventually you'll get the sort of ammunition that's perfectly matched with the design to allow you a reasonable degree of accuracy at a distance.

This is simply the first day of the rest of the battle toward the liberation of humanity from dictators and leftwingtard regulatory excess.

8 posted on 05/13/2013 4:27:34 PM PDT by muawiyah
[ Post Reply | Private Reply | To 6 | View Replies]

To: muawiyah

black powder is great. If you have molds you can melt down car battery lead(infinite supply) to make you own bullets. How cool is that? Black powder rules.


9 posted on 05/13/2013 4:30:04 PM PDT by central_va (I won't be reconstructed and I do not give a damn.)
[ Post Reply | Private Reply | To 8 | View Replies]

To: SWAMPSNIPER
I like it, SWAMPSNIPER!
10 posted on 05/13/2013 4:30:04 PM PDT by Standing Wolf
[ Post Reply | Private Reply | To 2 | View Replies]

To: marktwain

Don’t see why an AR 15 lower couldn’t be made with a printer. Frontier Armory is already making polymer receivers. Now that would get their knickers in a twist.


11 posted on 05/13/2013 4:30:19 PM PDT by Eagles6 (Valley Forge Redux)
[ Post Reply | Private Reply | To 1 | View Replies]

To: Standing Wolf
Thanks, I posted it on Chuckie Schumer's Facebook page and he wasn't nice enough to thank me!

I might have to post it again!!

12 posted on 05/13/2013 4:33:57 PM PDT by SWAMPSNIPER (The Second Amendment, a Matter of Fact, Not a Matter of Opinion)
[ Post Reply | Private Reply | To 10 | View Replies]

To: marktwain
and so it begins...
13 posted on 05/13/2013 4:38:53 PM PDT by Chode (Stand UP and Be Counted, or line up and be numbered - *DTOM* -ww- NO Pity for the LAZY)
[ Post Reply | Private Reply | To 1 | View Replies]

To: central_va
Thinking of a gravity fed magazine for this design ~ that way you don't need a SPRING.

Having gone over this before, but you should be able to build a small 'rocket' as a server ~ using your ipad/ipod/android as a client with an Ap that steers toward the center of your camera shot.

A ramjet design would be OK ~ air in front, burn in the middle, thrust out the rear ~ (this is a really short burn device which simplifies both the steering method ~ and the combustion chamber).

It delivers a poison needle, a piece of broken glass, whatever ~ all light weight stuff so the rocket can take it further.

The launching device ~ now being printed out as a plastic gun, can be simplified and you could use these as remote firing sites under just your control.

So, how many such devices could you control with a Iphone? Should be as many as the telephone array I saw being set up yesterday in a large home. To make sure a handicapped person is always near a phone they hooked up what seemed to be 18 phones in various spots. The designer saw no problem at all in handling that many devices simultaneously from an Iphone. Certainly remote firing points would be no greater problem for launching miniature but very deadly simple gunpowder driven ramjets.

The propellant is simple ~ using your traditional black powder recipe found in every dictionary, substitute pulverized AGAR AGAR for the charcoal. That way you don't need to roll out compressed grains ~ the flash powder will work just fine. I'm thinking you could brush it onto scotch tape, then roll it around a small plastic tube shaped core. It would burn around the wrapping applying steady thrust.

The 3Dprinter should provide you the accuracy needed to produce ammo tubes that don't tumble in flight!

14 posted on 05/13/2013 4:43:14 PM PDT by muawiyah
[ Post Reply | Private Reply | To 9 | View Replies]

To: Eagles6
Ummm. They did. The first one broke after 6 rounds. Several revisions later, it shot over 600 without a problem.

It's still available for download.

/johnny

15 posted on 05/13/2013 4:44:51 PM PDT by JRandomFreeper (Gone Galt)
[ Post Reply | Private Reply | To 11 | View Replies]

To: central_va
I used to buy black powder for $1.50 a pound. Then Ted Kennedy started his crap and we ended up with the Hazmat fee and now you're lucky to find a pound of black powder substitute for 30 bucks.

I would make my own, I've done it before, but I'm just too old to mess with it and put up with the damned government hassle to boot.

The only word I can think of to describe the world and this nation today is PREPOSTEROUS. The inmates are running the asylum.

Everything Thomas Jefferson was concerned about has come to pass and the morons are breeding like flies!

Where in Virginia are you? You may be a cousin, we got around!

16 posted on 05/13/2013 4:45:08 PM PDT by SWAMPSNIPER (The Second Amendment, a Matter of Fact, Not a Matter of Opinion)
[ Post Reply | Private Reply | To 9 | View Replies]

To: SWAMPSNIPER

I am in a hidden bunker in central va. That is all I can reveal.


17 posted on 05/13/2013 4:47:27 PM PDT by central_va (I won't be reconstructed and I do not give a damn.)
[ Post Reply | Private Reply | To 16 | View Replies]

To: muawiyah
The propellant is simple ~ using your traditional black powder recipe found in every dictionary, substitute pulverized AGAR AGAR for the charcoal.

I have the recipe memorized:


18 posted on 05/13/2013 4:57:16 PM PDT by Pollster1 ("Shall not be infringed" is unambiguous.)
[ Post Reply | Private Reply | To 14 | View Replies]

To: central_va

“Why mess with this toy?”

Because the government doesn’t want me to!


19 posted on 05/13/2013 4:58:27 PM PDT by Boogieman
[ Post Reply | Private Reply | To 6 | View Replies]

To: central_va

Got cousins all over, Russell County, Wythe County, whole SW corner.


20 posted on 05/13/2013 5:14:31 PM PDT by SWAMPSNIPER (The Second Amendment, a Matter of Fact, Not a Matter of Opinion)
[ Post Reply | Private Reply | To 17 | View Replies]

To: Chode
and so it begins...

********************

Or as King Theoden said before the attack on Helm's Deep ... "How did it come to this?"

21 posted on 05/13/2013 6:26:52 PM PDT by DNME ("... to support and defend the Constitution of the U.S. against all enemies, foreign and domestic")
[ Post Reply | Private Reply | To 13 | View Replies]

To: central_va

Do both.


22 posted on 05/13/2013 6:29:06 PM PDT by Tijeras_Slim
[ Post Reply | Private Reply | To 6 | View Replies]

To: DNME
one small encroachment at a time...
23 posted on 05/13/2013 6:34:05 PM PDT by Chode (Stand UP and Be Counted, or line up and be numbered - *DTOM* -ww- NO Pity for the LAZY)
[ Post Reply | Private Reply | To 21 | View Replies]

To: JRandomFreeper

Just looked it up. I guess the Liberator is more scary to them ‘cause 99% can be printed as opposed to an AR.


24 posted on 05/13/2013 10:25:14 PM PDT by Eagles6 (Valley Forge Redux)
[ Post Reply | Private Reply | To 15 | View Replies]

Disclaimer: Opinions posted on Free Republic are those of the individual posters and do not necessarily represent the opinion of Free Republic or its management. All materials posted herein are protected by copyright law and the exemption for fair use of copyrighted works.

Free Republic
Browse · Search
News/Activism
Topics · Post Article

FreeRepublic, LLC, PO BOX 9771, FRESNO, CA 93794
FreeRepublic.com is powered by software copyright 2000-2008 John Robinson