Free Republic
Browse · Search
News/Activism
Topics · Post Article

Skip to comments.

BP: Top Kill May Extend Another 48 Hours
Rig Zone ^ | 4/28/10 | BP

Posted on 05/28/2010 10:14:13 AM PDT by thackney

BP provided an update on developments in the response to the MC252 oil well incident in the Gulf of Mexico.

Subsea Source Control and Containment Subsea efforts continue to focus on progressing steps to stop the flow of oil from the well through interventions via the failed Deepwater Horizon blow out preventer (BOP), and to collect the flow of oil from the leak points. These efforts are being carried out in conjunction with industry experts and governmental authorities.

Operations on the top kill procedure continue. Heavy drilling fluids were pumped under pressure into the BOP starting May 26 at 1300CDT, and top kill operations continue through 2400CDT on May 27. It is estimated that the full top kill procedure could extend for another 24 to 48 hours.

If the well were successfully 'killed', it is expected that cementing operations would then follow. The top kill procedure has never before been attempted at these depths and its ultimate success is uncertain.

In parallel with the ongoing top kill operation, preparations have been made for the possible deployment of the lower marine riser package (LMRP) cap containment system.

Deployment would first involve removing the damaged riser from the top of the failed BOP to leave a cleanly-cut pipe at the top of the BOP's LMRP. The cap, a containment device with a sealing grommet, will be connected to a riser from the Discoverer Enterprise drillship, 5,000 feet above on the surface, and placed over the LMRP with the intention of capturing most of the oil and gas flowing from the well.

The LMRP cap is already deployed alongside the BOP in readiness for potential deployment. If it is decided to deploy this option, this would be expected to take some three to four days.

In addition to these steps, planning is being advanced for deploying, if necessary, a second BOP on top of the original failed BOP.

Drilling of two relief wells began on May 2 and May 16. It is estimated that each of these wells will take three months to complete from the commencement of drilling.

Surface Spill Response and Containment Work continues to collect and disperse oil that has reached the surface of the sea, to protect the shoreline of the Gulf of Mexico, and to collect and clean up any oil that has reached shore.

Almost 1,300 vessels are now involved in the response effort, including skimmers, tugs, barges and recovery vessels. Operations to skim oil from the surface of the water have now recovered, in total, some 274,000 barrels (11.5 million gallons) of oily liquid.

The total length of containment boom deployed as part of efforts to prevent oil reaching the coast is now almost 1.9 million feet, and an additional 1.25 million feet of sorbent boom has also been deployed.

So far 26,000 claims have been filed and 11,650 payments have already been made. BP has received over 96,000 calls into its help lines to date.

Additional information The cost of the response to date amounts to about $930 million, including the cost of the spill response, containment, relief well drilling, grants to the Gulf states, claims paid and federal costs. It is too early to quantify other potential costs and liabilities associated with the incident.


TOPICS: News/Current Events
KEYWORDS: bp; deephorz; deepwaterhorizon; energy; oil; oilspill
Navigation: use the links below to view more comments.
first 1-2021-26 next last

1 posted on 05/28/2010 10:14:13 AM PDT by thackney
[ Post Reply | Private Reply | View Replies]

To: thackney

Who came up with the stupid name “Top Kill”?


2 posted on 05/28/2010 10:15:01 AM PDT by Retired Greyhound
[ Post Reply | Private Reply | To 1 | View Replies]

To: thackney

Notice they keep extending this?


3 posted on 05/28/2010 10:16:55 AM PDT by jerry557
[ Post Reply | Private Reply | To 1 | View Replies]

To: thackney

I can’t wait to see what happens when they cut the riser tube off. The result should be interesting.


4 posted on 05/28/2010 10:18:37 AM PDT by ZX12R
[ Post Reply | Private Reply | To 1 | View Replies]

To: ZX12R

Mr. Suttles said BP was collecting over 22,000 barrels per day from riser tool before starting the top kill procedure.

I thought all they could get was 5,000 barrels per day.

Mr. Suttles at 1:20 into video below.

http://www.youtube.com/watch?v=dicIQ0KHN6w


5 posted on 05/28/2010 10:21:12 AM PDT by FootBall
[ Post Reply | Private Reply | To 4 | View Replies]

To: FootBall
Mr. Suttles said BP was collecting over 22,000 barrels per day from riser tool before starting the top kill procedure. I thought all they could get was 5,000 barrels per day.

I think they had to bump the number up because BPs stock price is down 7.25 percent today.
6 posted on 05/28/2010 10:26:23 AM PDT by ZX12R
[ Post Reply | Private Reply | To 5 | View Replies]

To: Retired Greyhound
It is descriptive of the action, as opposed to the relief well that drills into the well from the bottom for essential the same action.
7 posted on 05/28/2010 10:26:55 AM PDT by thackney (life is fragile, handle with prayer)
[ Post Reply | Private Reply | To 2 | View Replies]

To: ZX12R

Risky but a buy of BP stock or stock options could be quite the move. There is already talk of other oil companies buying BP.


8 posted on 05/28/2010 10:27:40 AM PDT by Williams (It's the policies, stupid)
[ Post Reply | Private Reply | To 6 | View Replies]

To: jerry557

They also only gave it a 60~70% chance of working in the first place and have continued to prepare for the next attempt and never stopped drilling the relief wells.


9 posted on 05/28/2010 10:27:54 AM PDT by thackney (life is fragile, handle with prayer)
[ Post Reply | Private Reply | To 3 | View Replies]

To: Retired Greyhound

Who came up with the stupid name “Top Kill”?


It’s not a stupid name. It’s appropriate.


10 posted on 05/28/2010 10:31:57 AM PDT by unkus
[ Post Reply | Private Reply | To 2 | View Replies]

To: unkus

In my opinion, it sounds like a stupid MSM nickname.

But if it is the industry’s standard term, I’ll deal with it.


11 posted on 05/28/2010 10:38:54 AM PDT by Retired Greyhound
[ Post Reply | Private Reply | To 10 | View Replies]

To: thackney

I’m sure everybody is tossing out hair brained ideas, but I’ve wondered if they could shoot a polymerizing agent down through the mud, and turn a long slug of the oil into say bakelight or some kind of hard plastic and thereby plug the damn hole.


12 posted on 05/28/2010 10:54:28 AM PDT by Jack of all Trades (Stop the change - I want to get off!)
[ Post Reply | Private Reply | To 1 | View Replies]

To: Retired Greyhound
How about the Tar Baby Tactic?

13 posted on 05/28/2010 11:04:12 AM PDT by SERKIT ("Blazing Saddles" explains it all.....)
[ Post Reply | Private Reply | To 2 | View Replies]

To: Retired Greyhound

Industry jargon doesn’t always make sense, initially, to the public, but usually it makes sense to those who are “in the industry” ... :-)


14 posted on 05/28/2010 11:04:24 AM PDT by Star Traveler (Remember to keep the Messiah of Israel in the One-World Government that we look forward to coming)
[ Post Reply | Private Reply | To 2 | View Replies]

To: thackney
Image and video hosting by TinyPic
15 posted on 05/28/2010 1:18:04 PM PDT by Recovering_Democrat
[ Post Reply | Private Reply | To 1 | View Replies]

To: Recovering_Democrat

I’m watching the live feed. It looks like more than just mud is spilling out. Doesn’t this suggest that the top-kill has not worked.

Katrina:Bush :: BP:Obama


16 posted on 05/28/2010 1:23:37 PM PDT by drb9
[ Post Reply | Private Reply | To 15 | View Replies]

To: Retired Greyhound

17 posted on 05/28/2010 3:28:31 PM PDT by FreeAtlanta (Hey, Barack "Hubris" Obama, $10 is all it would take, why spend millions to cover it up?)
[ Post Reply | Private Reply | To 2 | View Replies]

To: FreeAtlanta

Ha!


18 posted on 05/28/2010 3:33:10 PM PDT by Liberty Valance (Keep a simple manner for a happy life :o)
[ Post Reply | Private Reply | To 17 | View Replies]

Is there a web page with a real time map showing the spread of the spill, including where mere oil balls are coming ashore?

ff

19 posted on 05/28/2010 8:25:51 PM PDT by foreverfree
[ Post Reply | Private Reply | To 18 | View Replies]

To: Jack of all Trades
I’m sure everybody is tossing out hair brained ideas, but I’ve wondered if they could shoot a polymerizing agent down through the mud, and turn a long slug of the oil into say bakelight or some kind of hard plastic and thereby plug the damn hole.

I've wondered if they could pump in something like little thermite grenades that would go in, turn to slsg, and start welding themselvee to the inside of the pipe.

20 posted on 05/28/2010 8:32:23 PM PDT by tacticalogic ("Oh bother!" said Pooh, as he chambered his last round.)
[ Post Reply | Private Reply | To 12 | View Replies]


Navigation: use the links below to view more comments.
first 1-2021-26 next last

Disclaimer: Opinions posted on Free Republic are those of the individual posters and do not necessarily represent the opinion of Free Republic or its management. All materials posted herein are protected by copyright law and the exemption for fair use of copyrighted works.

Free Republic
Browse · Search
News/Activism
Topics · Post Article

FreeRepublic, LLC, PO BOX 9771, FRESNO, CA 93794
FreeRepublic.com is powered by software copyright 2000-2008 John Robinson