Keyword: 3dprinters

Brevity: Headers | « Text »
  • Designer Creates a DIY SLA 3D Printer for Under $30 (Minus the Projector)

    03/27/2015 9:59:12 PM PDT · by 2ndDivisionVet · 1 replies
    3D Print ^ | March 25, 2015 | Bridget Butler Millsaps
    Most of us are aware of the KISS principle: Keep it simple, stupid! And while simplicity is certainly a theme in many 3D printers, they are anything but stupid—and created by those who are the polar opposite—with ingenuity in abundance—which they use to share new innovations with the world. One quite simply has to give up with wondering what the collective ‘they’ will come up with next and just roll with the idea that the possibilities in 3D printing are infinite. And as progress in the industry and the community of makers marches on daily and hourly, it’s hard not...
  • Some Guys Just Made a Heavier-Caliber 3D-Printed Gun

    03/27/2015 12:34:36 AM PDT · by 2ndDivisionVet · 8 replies
    War Is Boring ^ | March 26, 2015 | Kyle Mizokami
    In March, a Website dedicated to 3D-printing firearms announced one of its members had developed a lower receiver for a Colt CM901 rifle. It’s a small — but evolutionary — step toward the development of firearms that pretty much anyone can download off the Internet. The CM901 is the bigger, badder brother of the ubiquitous AR-15. The CM901 has a similar design, but fires the heavier and more powerful 7.62-millimeter bullet, resulting in greater range and killing power. A group of gunsmiths associated with PrintedFirearm.com developed the CM901 lower receiver and uploaded an animated gif of a live-fire test. The clip is five seconds...
  • Italian Researchers Expect 3D Printed Eyes by 2027, Providing Enhanced Vision & WiFi Connection

    03/21/2015 8:34:15 PM PDT · by 2ndDivisionVet · 12 replies
    3D Print ^ | March 20, 2015 | Bridget Butler Millsaps
    There’s one thing you may have begun to notice about digital design and 3D printing: whatever you think might happen in the future is probably going to advance far beyond whatever you envisioned or thought might be a cool idea. And literally, one day you may be envisioning your entire world, and recording it as well, through completely artificially constructed, 3D printed eyeballs. You may be able to say goodbye to prescription glasses and contact lenses — and even your camera, as your original retina is replaced by a new and digital network contained inside your head, and even able...
  • How Will 3D Printing Affect Trucking?

    03/19/2015 12:35:02 AM PDT · by 2ndDivisionVet · 15 replies
    HDT's TruckingInfo ^ | March 18, 2015 | Deborah Lockridge, Editor in Chief
    Business is booming, fuel prices are down. So its time to start thinking about the next threat to the industry: 3D printing. Advocates of 3D printing have said it can transform manufacturing. This week, a new startup company announced a new 3D printing technique it says may actually deliver on that promise. In traditional 3D printing, the machine "prints" layers of material to create a 3D object. This takes time and leaves ripples showing where those layers were laid down. But what if you could "grow" an object out of a pool of liquid, much like the T-1000 rising from...
  • Answers to Some of the Biggest 3D Printing Skeptics

    03/16/2015 8:48:22 AM PDT · by 2ndDivisionVet · 19 replies
    3D Print ^ | March 16, 2015 | Brian Krassenstein
    If youve been reading our site for longer than a couple of weeks, then you likely have figured out that we are obsessed with 3D printing. Why are we so obsessed with this technology? Because we truly believe that 3D printing will change the world we all live in, mostly for the better, and the quicker this happens the better off we all will be. Although I, personally, became aware of 3D printing about half a decade ago, I didnt really understand it or venture to explore the various applications of the technology until only about two years ago. Soon...
  • Alphaseed Project Looks to 3D Print Entire Ocean Cities in International Waters (Sovereign States)

    03/15/2015 1:55:50 PM PDT · by 2ndDivisionVet · 6 replies
    3D Print ^ | March 11, 2015 | Eddie Krassenstein
    In the short amount time that we have been covering this industry, we have reported on many amazing 3D printing related projects being undertaken by various individuals and companies around the globe. There have been 3D printed cars, 3D printed apartment buildings, and even an entire 3D printed estate that is expected to be erected in New York sometime this year. However, when we were contacted by a man named Tops Nicol, the research founder of the Alphaseed project, we were truly blown away.  “Science is fascinating and its latest growth in all branches of scientific research has helped...
  • Making 3 D Weapons at Home, a Serious Security Risk! (To the fainting couch, Robin!)

    03/14/2015 10:11:14 PM PDT · by 2ndDivisionVet · 11 replies
    The New Delhi Times ^ | March 14, 2015
    The wonders of 3D printing, and the technologys potential to revolutionize the world of manufacturing, have thrilled entrepreneurs, tinkerers, government officials and the business community. However, the 3D technology has a potential dark side too in the form of 3D printing of weapons, not only is there a threat of fanatic element making use of the technology to procure 3D weapons, but on a more concerning note, there are strong chances that such weapons may easily escape the various security detection tests and could be used to devastating effect in public places. In 2013, a United States Department of Homeland...
  • Breakthrough Molecular 3D Printer Can Print Billions of Possible Compounds

    03/14/2015 9:58:12 PM PDT · by 2ndDivisionVet · 18 replies
    3D Print ^ | March 13, 2015 | Brian Krassenstein
    What will 3D printers ultimately evolve into? No one has a functioning crystal ball in front of them I assume, but a good guess would be a machine which can practically build anything its user desire, all on the molecular, and eventually atomic levels. Sure we are likely multiple decades away from widespread molecular manufacturing, but a group of chemists led by medical doctor Martin D. Burke at the University of Illinois may have already taken a major step in that direction. Burke, who joined the Department of Chemistry at the university in 2005, heads up Burke Laboratories where he...
  • This Chemistry 3D Printer Can Synthesize Molecules From Scratch

    03/13/2015 5:55:35 AM PDT · by 2ndDivisionVet · 11 replies
    Popular Mechanics ^ | March 12, 2015 | William Herkewitz
    Need an obscure medicinal compound found only in a jungle plant? Just print it.Say you're a medical researcher interested in a rare chemical produced in the roots of a little-known Peruvian flower. It's called ratanhine, and it's valuable because it has some fascinating anti-fungal properties that might make for great medicines. Getting your hands on the rare plant is hard, and no chemical supplier is or has ever sold it. But maybe, thanks to the work of University of Illinois chemist Martin Burke, you could print it right in the lab. In a new study published in the journal Science...
  • Video: 3D-printed Lower Receiver for a korpion vz. 61

    03/11/2015 5:17:27 PM PDT · by 2ndDivisionVet · 8 replies
    OutdoorHub ^ | March 11, 2015 | Daniel Xu
    The korpion vz. 61 is a very recognizable submachine gun that garnered a following due to its representation in video games and movies. First designed in 1959, this Czechoslovak firearm is also available in semiautomatic versions. However, the semiautomatic variants can be a bit hard to find, and unless you are capable of milling your own lower receiver for one, many fans will have a difficult time getting their hands on a working korpion. That is, unless you know how to work a 3D printer. The enthusiasts in this video used a demilled receiver to design their blueprint for this...
  • Inside the Weird World of 3D Printed Body Parts

    03/09/2015 7:11:54 PM PDT · by 2ndDivisionVet · 12 replies
    Back Channel ^ | March 4, 2015 | Andrew Leonard
    Laura Bosworth wants to 3D print breast nipples on demand. The CEO of the Texas startup TeVido Biodevices is betting on a future in which survivors of breast cancer who have undergone mastectomies will be able to order up new breasts printed from their own living cells. “Everyone,” she says, “knows a woman who has had breast cancer.” Right now their options are limited. Reconstructed nipples using state-of-the-art plastic surgery techniques, she says, “tend to flatten and fade and don’t last very long.” A living nipple built from the patient’s own fat cells, and reconstructed to the precise specification of...
  • Students design plastic recycler to make 3D-printing super cheap

    03/07/2015 12:44:10 AM PST · by 2ndDivisionVet · 7 replies
    VR-Zone ^ | March 7, 2015 | Kenny Doan
    A couple of forward-thinking engineering students from the University of British Columbia have put together a little machine that grinds up used plastics and turn them into usable filaments for 3D-printing. Its called the ProtoCycler, and itll generate a kilogram spool of filament for free (negating the cost of electricity of course) if you have some soda pop bottles lying around. The concept behind the 3D-printer add-on was simplecombine a filament extruder and plastic grinder into one contraption. (COMPARISON-CHART-AT-LINK)The ProtoCycler can churn out 10 feet of filament a minute, which makes it the fastest extruder on the market according to...
  • The CIA Is Investing In 3D Printers That Can Build Electronics

    03/06/2015 1:10:10 AM PST · by 2ndDivisionVet · 4 replies
    Gizmodo ^ | March 5, 2015 | Matt Novak
    The 3D printing industry is still very much in its infancy. But that could change if the CIA has its way. The intelligence agency's venture capital firm just invested in Voxel8, the company behind the first multi-material, 3D electronics printer. What does the CIA want with 3D printing? We can only guess at this point, but we may hear stories one day of how some futuristic James Bond 3D-printed his own gadgets in the field. What's the potential impact for consumers? The move might just jumpstart a field that has so far been struggling to find its footing. Voxel8 says...
  • How 3D Printing Could End The Deadly Shortage Of Donor Organs

    03/04/2015 6:05:13 PM PST · by 2ndDivisionVet · 13 replies
    The Huffington Post ^ | March 2, 2015 | Macrina Cooper-White
    Three-dimensional printing has been used to make everything from pizza to prostheses, and now researchers are working on using the emerging technology to fabricate hearts, kidneys, and other vital human organs. That would be very big news, as the number of people who desperately need an organ transplant far outstrips the number of donor organs available. On average, about 21 Americans die every day because a needed organ was unavailable. What exactly is the promise of 3D printing organs and tissues, or "bioprinting?" How does the technology work, and when might it start saving lives? For answers to these and...
  • Engineer Creates a Unique 3D Metal Printer for Just $2 Prints in Gold, Platinum, Iron & More

    02/28/2015 11:00:16 PM PST · by 2ndDivisionVet · 27 replies
    3D Print ^ | February 26, 2015 | Eddie Krassenstein
    It isn’t often that you come across new 3D printers that utilize an entirely new concept which hasn’t been seen within this industry as of yet. With today’s technology, we are able to 3D print objects in hundreds of different materials, but when it comes to printing with metals, most of these machines are out our price ranges. 3D metal printers are mainly reserved for large corporations, as they come with price tags in excess of $250,000. However, as technology advances, we may one day soon be able to 3D print metal objects from the comfort of our own homes,...
  • A Room-Sized 3D Printer Will Make Freeform Concrete Design Easy

    02/28/2015 12:24:24 AM PST · by 2ndDivisionVet · 10 replies
    Gizmodo ^ | February 26, 2015 | Jamie Condliffie
    Concrete is an amazing building material: cheap to create, strong when used correctly, and hard-wearing, too. But turning it into exotic and shapely forms can be prohibitively complex and expensive. Now, a 3D printer capable of producing one-off moulds as large as a phone booth could help turn architectural dreamw into affordable reality. The Engineer reports that a collaboration between 3Dealise, a 3D engineering company, and Bruil, a construction company, has spawned the new device. The pair claim that the machinepictured belowcan "create irregularly curved surfaces, lightweight half-open mesh or honeycomb structures, and even ornamental craftwork." The printer is used...
  • Australian researchers 3-D print two jet engines

    02/26/2015 1:47:29 PM PST · by E. Pluribus Unum · 8 replies
    Breitbart.com ^ | 02/26/2015 | UPI
    MELBOURNE, Feb. 26 (UPI) Researchers have 3-D printed everything from animal prosthetics and human teeth to whole cars, but now a university in Australia has tackled printing two jet engines. A group of researchers at Melbournes Monash University, in conjunction with Deakin University and Australias Commonwealth Scientific and Industrial Research Organization (CSIRO), used a large 3-D printer to manufacture the two engines.
  • How 3D printing has advanced from product prototyping to making human organs

    02/22/2015 8:20:39 AM PST · by 2ndDivisionVet · 10 replies
    The International Business Times ^ | January 12, 2015 | Jayalakshmi K
    A printer was once just a printer, dispensing paper sheets with printed material made from the ink stored within. But today, a printer has evolved to becoming a small-scale manufacturer that 'prints' out anything from human organs to affordable meals to guns. For instance, the XYZPrinting 3D Food Printer, exhibited at the recent CES 2015 in Las Vegas, is expected to print any style of uncooked cookies and other dough-based pastries in minutes. Not exactly as affordable as any other food processor, the printer ranges between $500 and $1,900 and prints food that measures around 5000 cubic cm by volume....
  • 3HTi Signs Deal with MarkForged to Sell the Mark One 3D Printer (Carbon fiber, Kevlar, fiberglass)

    02/22/2015 1:19:58 AM PST · by 2ndDivisionVet · 5 replies
    3D Printing ^ | February 19, 2015 | TE Edwards
    The Mark One 3D printer from MarkForged caused a bit of a sensation last January when it was announced that it could extrude continuous fiber using the FFF process.The Mark One 3D printer, featuring a build volume of 320 x 132 x 160 mm, can print using carbon fiber, Kevlar, fiberglass, and nylon, and in doing so creates very strong parts. Now 3 HTi has announced theyll be offering, through a partnership with the Cambridge, MA-based MarkForged, the Mark One 3D printer as one of the first companies authorized to sell the revolutionary technology. 3 HTi is a technology solutions...
  • ICL Researchers Figure out How to 3D Print Pure Graphene

    02/18/2015 6:04:28 PM PST · by 2ndDivisionVet · 23 replies
    3D Printing ^ | February 13, 2015 | Brian Krassenstein
    We’ve seen an incredible amount of research hours and dollars being poured into an area where the ‘miracle material’ graphene converges with what some may call a ‘miracle technology’ in 3D printing. In this space, a whole slew of groundbreaking applications and processes may emerge as a better understanding of graphene, and how to 3D print it come about. We’ve discussed a company called Graphene 3D Lab in the past. They have been producing a graphene nanocomposite filament for typical FDM/FFF 3d printers. The problem with this filament, however, is the fact that most of the desirable properties of graphene,...
  • Houses hot off the 3D printer

    02/14/2015 4:46:48 PM PST · by 2ndDivisionVet · 12 replies
    Yahoo! Homes ^ | February 11, 2015 | Ilyce R. Glink
    Robotic building by Contour Crafting won the grand prize in a NASA magazine's Create the Future contest.In the not-too-distant future, building a new home may be as simple as printing it out. The process of wielding 3D printers to make homes is in its infancy today, but someday soon you may look out your window at a large-scale printer, swiftly spitting out a whole home under the instruction of just one operator. "Generally, they'll be much cheaper, much faster, much safer and with much nicer architectural features [than traditional homes]," says Dr. Behrokh Khoshnevis, creator of and lead researcher for...
  • 5000 times more conductive 3D printer ink for parts with embedded functional electronics and wiring

    02/06/2015 2:13:19 AM PST · by 2ndDivisionVet · 14 replies
    Next Big Future ^ | January 13, 2015 | Brian Wang
    Voxel8, creator of the worlds first multi-material 3D electronics printer and backed by Braemar Energy Ventures, announced pre-order availability of its initial product the Voxel8 Developers Kit. Voxel8 also announced its partnership with Autodesk to develop a new design tool called Project Wire for creating 3D electronic devices printed on Voxel8s platform. Together, Voxel8 and Autodesk are enabling designers and engineers to create three-dimensional parts with embedded circuitry for the first time. Rapidly design novel devices, such as 3D printed antennas, electromagnetic coils, or stack ICs in ways that were previously impossible. Eliminate wire harnesses by combining them with...
  • NTU develops Singapore's first 3D-printed urban solar electric car

    02/02/2015 9:58:47 AM PST · by 2ndDivisionVet · 7 replies
    Channel News Asia ^ | February 2, 2015
    By pushing existing technology to the limits, undergraduates from NTU have assembled a 3D-printed body shell for an electric car, says Associate Professor Ng Heong Wah.SINGAPORE: Students from the Nanyang Technological University (NTU) have built the first urban solar electric car with a 3D-printed body in Singapore, said the university in a news release on Monday (Feb 2). The car named NTU Venture 8 (NV8) is mounted on a carbon fibre single shell chassis. We are extremely proud to have designed and assembled a 3D-printed body shell for the electric car, Associate Professor Ng Heong Wah said. The...
  • 3D printers to make human body parts? It's happening

    01/28/2015 6:54:27 PM PST · by 2ndDivisionVet · 35 replies
    The San Jose Mercury News Business ^ | January 28, 2015 | Steve Johnson
    It sounds like something from a science fiction plot: so-called three-dimensional printers are being used to fashion prosthetic arms and hands, jaw bones, spinal-cord implants -- and one day perhaps even living human body parts. While the parts printed for humans so far have been fashioned from plastic, metal and other inorganic materials, researchers in California and elsewhere also have begun printing living tissue, with the goal of eventually employing these "bioprinters" to create customized kidneys, livers and other organs for people needing transplants. What's particularly attractive about the technology, according to its proponents, is that 3D printers can produce...
  • World's first 3D-printed apartment building constructed in China

    01/21/2015 6:45:39 PM PST · by 2ndDivisionVet · 18 replies
    CNet ^ | January 20, 2015 | Michelle Starr
    A Chinese company has successfully 3D printed a five-storey apartment building and a 1,100 square metre villa from a special print material.While architectural firms compete with their designs for 3D-printed dwellings, one company in China has quietly been setting about getting the job done. In March of last year, company WinSun claimed to have printed 10 houses in 24 hours, using a proprietary 3D printer that uses a mixture of ground construction and industrial waste, such as glass and tailings, around a base of quick-drying cement mixed with a special hardening agent. Now, WinSun has further demonstrated the efficacy of...
  • TNO is Developing a Racetrack 3D Printing System That is 10 Times Faster Than Current Technology

    01/17/2015 7:11:01 PM PST · by 2ndDivisionVet · 6 replies
    3D Print ^ | January 14, 2015 | Whitney Hipolite
    Perhaps you read the title of this article, and automatically assumed that we made a typo. After all, it sounds awfully similar to a story we did in the past about 3D Systems. If you have been following the 3D printing space for the past several months, then you know that 3D Systems has been working on creating a new 3D printing system that they say is based on a “racetrack architecture”. It is an assembly line of sorts, and is said to be able to fabricate objects up to 50 times faster than other printers currently available today. Now...
  • Impossible Objects Receives $2.8m Investment to 3D Print with Kevlar, Fiberglass & Carbon Fiber

    01/02/2015 3:06:04 PM PST · by 2ndDivisionVet · 5 replies
    3D Print ^ | December 16, 2014 | Sarah Anderson
    Impossible Objects is, even for the 3D printing world, apparently doing the impossible. The focus of the company is to create the world’s first composite 3D printed objects, using an impressive variety of materials, to revolutionize the already-revolutionary 3D printing space. Larry Kaplan heads up the Impossible Objects team as the CEO. The former CEO of Navteq, Kaplan is leading the five-employee firm’s chaimpossible objects logorge in developing novel 3D manufacturing machines to enhance upon the presently available capabilities. “Current technologies are 20 or so years old,” said Kaplan. “They are great for prototyping but too slow compared to volume...
  • 3D Printing May Lead to the Creation of Superhuman Organs Providing Humans with New Abilities

    01/01/2015 4:00:29 PM PST · by 2ndDivisionVet · 31 replies
    3D Print ^ | December 5, 2014 | Eddie Krassenstein
    Evolution is what got us here today, if you accept the scientific approach to our creation. It was processes such as survival of the fittest which led us, as well as other earthly creatures, to develop some of the traits, senses, and abilities that we possess today. For superhero fans, especially those who love the X-Men, you know that these superhuman characters acquired their powers through the process of evolution. Little mutations in genes led to them become the recipient of more than simple human-like abilities. Wouldnt we all like to have the ability to see through objects, climb walls,...
  • Future food dilemma

    01/01/2015 11:50:05 AM PST · by 2ndDivisionVet · 12 replies
    Feedstuffs ^ | December 31, 2014 | Cheryl Day
    The future is always filled with uncertainty, especially for individuals involved in growing and producing safe, nutritional food for the world. As the agriculture community, spends a great deal of time and effort in pondering the what ifs, consumers still sit in the driver seat. One thing futuristic minds can agree on is the world population clock is clicking away at much quicker rate than the U.S. population. Recent estimates show a global population will not slow down its pace even after it reaches the United Nations projection of 9.2 billion in 2050. For now, the drop in global population...
  • 4 Amazing Things You Can Do With 3-D Printers Very Soon

    12/31/2014 4:21:05 PM PST · by 2ndDivisionVet · 36 replies
    Wall Street Cheat Sheet ^ | December 31, 2014 | Rakesh Sharma
    2014 was the year of 3-D printers. According to the 2014 edition of the Wohlers Associates annual report (via The Motley Fool), which is considered the industrys bible on 3-D printing, there are approximately 400 to 600 3-D printer brands available in the $200 to $5,000 price range. That number is not surprising: With its focus on customized products and innovative materials and technology, 3-D printing is poised to transform our world. Yet not much is known about 3-D printers. This is due to two reasons. First, 3-D printing still has a long way to go to become consumer-friendly. The...
  • US Army Looks To 3D Print Food For Soldiers

    12/31/2014 2:39:55 PM PST · by 2ndDivisionVet · 33 replies
    Forbes ^ | December 31, 2014 | Jennifer Hicks
    Food researchers in the US Army are looking into ways to 3D print food for soldiers. According to a press release, Army food technologists say that 3D printed food could produce meals on demand for soldiers in the battlefield. With 3D technology, food can be tailored to a soldiers nutritional needs. Because the Armys Meal Ready-to-Eat (MRE) standard for food has a shelf life of three years, 3D printing creates new options that could make meals have longer and more stable shelf lives according to Lauren Oleksyk, Natick Soldier Research, Development and Engineering Center (NSRDEC). Earlier this month in December...
  • Research group creates first LED 3D printer (Also "Bionic Ear" from bovine cells)

    12/31/2014 1:55:15 PM PST · by 2ndDivisionVet · 14 replies
    After more than two years and an estimated $20,000, a research group in the mechanical engineering department has created the first 3D printer capable of printing LED lights. The venture was led by researcher Yong Lin Kong and Ian Tamargo '14, and was sponsored by the Air Force of Scientific Research and the Defense Advanced Research Project Agency. The research group McAlpine, led by mechanical and aerospace engineering professor Michael McAlpine, made a breakthrough more than a year ago after it successfully printed 3D bionic ears, devices that can hear sound frequencies beyond the capacity of a human ear, out...
  • 8 Unbelievable Ideas 3D Printing is Already Being Used For

    12/28/2014 4:04:52 PM PST · by 2ndDivisionVet · 30 replies
    Tech Cocktail ^ | December 28, 2014 | Hilary Smith
    If 3D printers dont already fall somewhere on your list of the top ten coolest things ever, then you really need to take some time to rethink your priorities. The following list of eight unbelievably awesome things that 3D printing is already being used for should help to convince you (if you need convincing) that 3D printers are science fiction come true. 1) Prosthetic Legs for Dogs With a prosthetic leg created by designers at 3D printing company 3D systems, Derby the disabled rescue dog (warning: if youre pregnant, menstruating, or a passionate animal lover the aforementioned link will probably...
  • Researchers 3 Years Away from Commercializing Pure Graphene 3D Printers

    12/24/2014 8:36:43 PM PST · by 2ndDivisionVet · 8 replies
    3D Print ^ | December 24, 2014 | Heidi Milkert
    As we’ve mentioned so many times in past articles, the convergence of additive manufacturing and the ‘miracle material’ graphene could have major ramifications for dozens of industries over the next several years. Because of this, researchers and companies are spending a great deal of time and money figuring out the best methods to 3D print graphene. A group of researchers, led by Seol Seung-kwon at the Korea Electrotechnology Research Institute’s Nano Hybrid Technology Research Center (KERI) are at the forefront of this research. As we mentioned last month, KERI, a unit under the Ministry of Finance in South Korea, recently...
  • Is this the future of fashion? First-ever 4D dress created using a printer is unveiled

    12/14/2014 11:18:46 AM PST · by 2ndDivisionVet · 19 replies
    The London Daily Mail ^ | December 14, 2014 | Bianca London
    As many women know only too well, finding a dress that fits like a glove is no easy task. But a new dress, created using a 3D printer, may be the answer to every woman's style woes. A design studio have used 3D printing technology to create an innovative dress customised to a womans body. The dress, which costs a staggering 1,900 ($3,000) to print, features 2,279 printed panels interconnected by 3,316 hinges. Creators Nervous System call it a 4D dress as, like fabric, the printed garment can go from a compressed object to its intended shape. Jessica Rosenkrantz, co-founder...
  • exVive3D 3D Printed Human Liver Tissue Now Commercially Available by Organovo

    12/13/2014 8:13:28 AM PST · by 2ndDivisionVet · 14 replies
    3D Print ^ | November 18, 2014 | Brian Krassenstein
    New technologies such as 3D bioprinting promise to offer a laundry list of new treatments, drug discovery, and cures within the medical industry. With that said, we have been hearing promises for years that 3D printing will change the face of medicine. Despite these promises, bioprinting has yet to make any major impact within the market. Today things may have just changed! San Diego-based 3D bioprinting company Organovo (NYSE MKT: ONVO) has today announced the full commercial availability of their exVive3D Human Liver Tissue for preclinical drug discovery testing. The tissue, which is created via an in-house 3D printer, could...
  • Make Your Own 3D Printer for Under $60 Using Recycled Electronic Components

    12/02/2014 8:26:58 PM PST · by 2ndDivisionVet · 39 replies
    3D Print ^ | November 6, 2014 | Debra Thimmesch
    One of the obstacles to jumping headlong into the additive manufacturing milieu for many people is often the expense of the 3D printer itself. Further, for those intrepid, budding engineers, designers, makers, and artists, an initial foray might more reasonably and affordably involve logo-instructables-01using a less expensive and complex machine. Enter one Instructables contributor, mikelllc, who has designed a make-it-yourself 3D printer that is constructed largely from recycled electronic components. Currently, only about 12.5% of all electronic waste, or e-waste, is recycled. Instead, the majority of cast-off electronic products around 20 to 50 million metric tons per year worldwide...
  • UPS Stores 3D Printing Service Rules Say Make Love, Not War Sex Toys Permitted, Guns Not

    11/29/2014 8:53:43 PM PST · by 2ndDivisionVet · 8 replies
    3D Print ^ | November 29, 2014 | Michelle Matisons
    Makers, make love, not war. This appears to be the best way to summarize UPSs 3D printing service guidelines. UPS has been offering 3D printing services for a little while, but of course, these services come with a strict set of guidelines about what they will and wont print for you. Naturally, just like going through airport security, weapons are at the top of the list of no-nos. Anything gun or gun part related and anything that can be used in the design, development, manufacture, testing, construction, operation, or maintenance of nuclear weapons, missile or rocket systems, unmanned air vehicles,...
  • 3D printing technique will put electronics into just about everything

    11/24/2014 9:14:38 PM PST · by 2ndDivisionVet · 5 replies
    Engadget ^ | November 23, 2014 | Jon Fingas
    You can use 3D printing to make a handful of electronics, such as antennas and batteries, but LEDs and semiconductors have been elusive; you usually need some other manufacturing technique to make them work, which limits what they can do and where they'll fit. A team of Princeton researchers recently solved this problem, however. They've found a way to make quantum dot LEDs (and thus semiconductors) using only a 3D printer. The scientists choose printable electrodes, polymers and semiconductors, which are dissolved in solvents to keep them from damaging underlying layers during the printing process; after that, the team uses...
  • This bullet makes 3D printed guns genuinely dangerous weapons (but don't panic just yet)

    11/08/2014 12:02:43 AM PST · by 2ndDivisionVet · 18 replies
    Tech Times ^ | November 6, 2014 | Nicole Arce
    One of the things that have prevented 3D printed guns from gaining popularity with the mainstream is the fact that they can't fire more than several rounds without wearing out. The plastic used to make the body of the gun is simply too fragile to accommodate the force of firing. A 25-year-old machinist has found an easy, although time-consuming, way to solve this problem. Michael Crumling has developed ammunition he calls .314 Atlas, after the .314-inch caliber and the Atlas lathe he used to make his bullets. Each bullet designed by Crumling is buried deep inside and reinforced with a...
  • This 3D Printer Is Made Out of a Floppy Disk Drive and Other E-Waste

    11/06/2014 12:57:12 PM PST · by 2ndDivisionVet · 5 replies
    Kinja's Gizmodo ^ | November 5, 2014 | Kelsey Campbell-Dollaghan
    When was the last time you used your computer's disc drive? What about your DVD player? E-waste is all around us, but as the brilliant Instructables user behind this $60 3D printer proves, there's plenty to be done with itif you've got some engineering chops. Last week we wrote about the world's smallest 3D printer, which costs less than $300 and prints resin. But an Instructables user named Mikelllc has gone way further, uploading his designs for a 3D printer made from 80 percent recycled e-waste and costing roughly $60. Part of the idea, he writes, is to "help us...
  • Is School Overrated? High School "Dropout" Makes Affordable 3D Printer

    11/02/2014 9:52:28 PM PST · by 2ndDivisionVet · 21 replies
    Forbes ^ | October 31, 2014 | Esha Chhabra
    If you want a reason to opt out of school, youre not alone. And Angad Daryani might just be the inspiration you were looking for. Daryani, a 16-year-old Mumbaiker, quit school in the 9th grade, frustrated by rote learning. Soon after, he built Indias first 3D printer (and possibly the worlds cheapest 3D printer). In 2013, he developed an eye-pad for the blind with MIT. When he was younger, he set up a miniature solar-powered boat and created an automatic watering system for garden plants. He has a longer list of hobbies that you can see here. He calls himself...
  • 3D Printer Hack Makes Automatic Tattoo Machine

    10/29/2014 9:28:41 PM PDT · by 2ndDivisionVet · 15 replies
    PSFK ^ | October 29, 2014 | Jason Brick
    French designers alter 3D printer to let you ink yourself 3D printing technology has now followed the curve of most emerging inventions. What starts as a prototype gets picked up by the industries the idea most impacts, then by corollary industries, then by the art and hobbyist crowd. This month, Paris design studio Appropriate Audiences made that final step by hacking a 3D printer and turning it into a tattoo gun. The printing device itself, called Tatoue, affixes a tattoo gun on rails to a square metal frame. The frame and gun can move on three axes so the tattooing...
  • PrintAlive 3D Bioprinter Creates Skin-like Living Bandages to Advance Burn Treatment

    09/18/2014 5:47:10 PM PDT · by 2ndDivisionVet · 6 replies
    3D Print.com blog ^ | September 18, 2014 | Debra Thimmesch
    Health professionals who treat burn victims are acutely aware of the necessity to treat burn injuries, particularly severe ones, as rapidly as possible. As one journal article explains it, In severe burn injuries where both the epidermal and dermal layers of skin are destroyed, prompt wound closure is critical for favourable [sic] patient outcomes and reduced mortality rates. A team of biomedical and mechanical engineering graduate students at the University of Toronto have developed what may at the least be considered a preliminarybut certainly extremely technologically advancedsolution to the problem of critical, temporal health intervention for burn patients. For their...
  • 5 Different 3D Printed Gun Models Have Been Fired Since May, 2013 Here They Are

    09/10/2014 8:37:43 PM PDT · by 2ndDivisionVet · 17 replies
    3D Print.com blog ^ | September 10, 2014 | Brian Krassenstein
    While we have seen so many incredible life-changing applications for 3D printing, there are still many concerns which remain on the table when dealing with the possible negative implications of the technology. Whether you believe that the ease in which practically anyone will eventually be able to fabricate a firearm is a good or bad thing, just the thought of 3D printed firearms will send shivers down the spines of law enforcement agencies around the world. There has been an incredibly fast progression of the technology behind the methods of manufacturing guns with 3D printers in the last two years...
  • Should Stratasys be Worried? London Man is Developing a Polymer Jetting 3D Printer for Under $2000

    09/10/2014 7:39:47 PM PDT · by 2ndDivisionVet · 17 replies
    3D Print.com blog ^ | September 9, 2014 | Eddie Krassenstein, CEO, AY.com, Web Developer, Domain Investor, Internet Marketer
    There are two 3D printing technologies that are capable of producing products that are almost indistinguishable from those created using traditional manufacturing techniques. These would be Selective Laser Sintering (SLS), and Polymer Jetting technology. The former is widely used by 3D Systems in their industrial level machines, which can cost in the $500,000+ range. The latter is currently used by Stratasys in their patented PolyJet technology, which is utilized in most of their industrial level 3D printers. These printers also cost in the 6-figure-plus range. While these 3D printing technologies are some of the best out there, the price tags...
  • Philips Brand Uses Pure Tungsten for Metal 3D Printing and Rapid Prototyping

    09/04/2014 5:58:40 PM PDT · by 2ndDivisionVet · 13 replies
    Inside 3DP ^ | September 4, 2014 | Shanie Phillips
    Tungsten is an extremely hard, robust rare metal that has the highest melting point of all the elements, at 3422 C (6192 F). It also has a density that is 19.3 times that of water and about 1.7 times that of lead, which makes it comparable to uranium and gold. And now, a Philips-owned company is 3D printing it. Netherlands-based Smit Rntgen, a medical imaging parts manufacturer, has used Direct Metal Laser Sintering to 3D print tungsten parts. The company began researching the potential of 3D printing tungsten as a business opportunity over a decade ago and announced on Monday...
  • U.S. man 3D prints mini castle, sets sights on printing livable house

    09/03/2014 7:48:02 PM PDT · by 2ndDivisionVet · 10 replies
    CTV News ^ | September 3, 2014 | Jordan Chittley
    3D castle printed by Andrey Rudenko in Shorewood, Minnesota as seen at the end of August 2014. The castle is about 3.5 metres high.People have used 3D printers to print everything from medical devices to guns. But one Minnesota man is hoping to take this new technology to the next level and print a house. Andrey Rudenko, of Shorewood, Min., plans for the house to be about 10 metres by 20 metres. If it is two storeys, it will be about 3,600 square feet. And he is hoping to print the entire house in about a week. It would be...
  • Up Up and Away: Commercial Drone Market Ready for Take Off

    08/31/2014 3:04:27 AM PDT · by 2ndDivisionVet · 13 replies
    iMedia Connection ^ | August 30, 2014 | Neal Leavitt, president, Leavitt Communications
    Drone proponents prefer using the term Unmanned Aerial Vehicle (UAV) or UAS for Unmanned Aerial System (latter term includes the entirety of the flying vehicle and the ground-base communications connection connecting the two). Whatever your preferred verbiage is, drones are poised to become a huge global business and the aerial devices are going to have a significant impact across a wide variety of industries. Historically, the military has been the biggest user/purchaser of drones; The Wall Street Journal estimated that the U.S. military spent about $3 billion on drone programs in 2012. And many aerospace companies continue to develop highly...
  • First Entirely 3D Printed Estate is Coming to NY, Including a 2400 Sqft House, Pool & More

    08/23/2014 2:35:22 AM PDT · by 2ndDivisionVet · 25 replies
    3D Print.com blog ^ | August 20, 2014 | Eddie Krassenstein, CEO, AY.com, Web Developer, Domain Investor, Internet Marketer
    Building site of the first ever 3D printed estate in Gardiner, New York. New York City architect/contractor Adam Kushner begins construction of the first ever 3D printed estate, which features a 3D printed swimming pool, 4-bedroom, 2400 square foot home, and more. The 3D printer which will be a modified version of Enrico Dini’s D-shape printer, will, if all goes as planned, eventually be able to automatically place rebar within the 3D printed house, as it prints. We have covered a lot of news concerning the 3D printing of houses, over the course of the last year or so. Whether...