Free Republic
Browse · Search
General/Chat
Topics · Post Article

Skip to comments.

Electromagnetic water cloak eliminates drag and wake
phys.org ^ | 12/11/2017 | by Ken Kingery & Provided by: Duke University

Posted on 12/11/2017 1:48:34 PM PST by Red Badger

A schematic for a prototype of the proposed water cloaking device. It consists of wires and coils that create an electromagnetic field that acts on dissolved ions to move water around the object. Credit: Duke University

=======================================================================================

Researchers have developed a water cloaking concept based on electromagnetic forces that could eliminate an object's wake, greatly reducing its drag while simultaneously helping it avoid detection.

The idea originated at Duke University in 2011 when researchers outlined the general concept. By matching the acceleration of the surrounding water to an object's movement, it would theoretically be possible to greatly increase its propulsion efficiency while leaving the surrounding sea undisturbed. The theory was an extension of the group's pioneering work in metamaterials, where a material's structure, rather than its chemistry, creates desired properties.

Six years later, Yaroslav Urzhumov, adjunct assistant professor of electrical and computer engineering at Duke, has updated the theory by detailing a potential approach. But rather than using a complex system of very small pumps as originally speculated, Urzhumov is turning to electromagnetic fields and the dense concentration of charged particles found in saltwater.

The study appears online in the journal Physical Review E on December 7, 2017.

"The original idea was so big that it enticed colleagues at the Naval Undersea Warfare Center to help us pursue it, even though they were incredibly skeptical," said Urzhumov, who was among the researchers who worked on the original 2011 paper. "Since then, we have identified a path to materializing this seemingly impossible proposal."

The crux of the issue being addressed is that water is a relatively viscous liquid that, when moved, likes to pull its surroundings along for the ride through shear forces. A fish feels much heavier being pulled through the water than lifted through open air because of all the water dragged along with it.

Besides essentially pulling extra water, drag can also be increased by how water flows around an object. A hydrodynamic object with fluid flowing smoothly along its surface creates much less drag than a blocky object that creates a mess of chaotic, turbulent flows in its wake.

The solution to these issues is to move the water out of the way. By accelerating the water around the object to match its speed, shear forces and turbulent flows can both be avoided.

"There are many ways to reduce wake and drag, like surrounding an object with low-friction bubbles, which is actually done with some naval torpedoes," said Urzhumov. "But there's only so much you can do if you're just applying forces at the surface. This cloaking idea opens a new dimension to create forces around an underwater vessel or object, which is absolutely required to achieve full wake cancellation."

Urzhumov originally envisioned a sort of truss-like frame enveloping an object with thin structures and tiny pumps to accelerate its flow as it passed through. But as time went by, he decided a more practical approach would be to use "magnetohydrodynamic" forces.

When a charged particle travels through an electromagnetic field, the field creates a force on the particle. Because ocean water is chock full of ions like sodium, potassium and magnesium, there are a lot of charged particles to push. The idea isn't as crazy as it may sound—Japan built a prototype passenger ship in 1991 called the Yamato 1 using these forces as a means of propulsion, but found the approach was not more efficient than traditional propellers.

In the new paper, Urzhumov and his graduate student, Dean Culver, use fluid dynamics simulations to show how a water cloak might be achieved using this approach. By controlling the velocity and direction of the water surrounding a moving object, the simulations show such a system can match the water's movement within the cloak to that of the surrounding sea.

This would make it appear that the water inside the cloak is completely stagnant in relation to the water outside of the cloak, eliminating the drag and wake. Of course, practical implementations aren't perfect, so some drag and wake would remain in any realization of the device.

While the simulations used a cloaking shell half the width of the object itself, the calculations show the shell could theoretically be as thin as you wanted it to be. Another important result was that the forces inside the shell would not have to change directions as the object sped up, they would only need more power.

"That is one of the major achievements of this paper," said Urzhumov. "If you don't have to adjust the distribution of forces, you don't need any electronic switches or other means of dynamic control. You can set the structure with a specific configuration and simply crank up the current as the object speeds up."

Urzhumov says that for an actual ship or submarine to ever use such a device, it would need a nuclear reactor to power it, given the enormous energy requirements to cloak an object of that size. That does not mean, however, that a smaller diesel vessel could not power a smaller cloaking device to shield potentially vulnerable protrusions from detection.

Urzhumov also says that his theories and calculations have many potential applications outside of the ocean. Similar designs could be used to create a distributed ion propulsion system for spacecraft or to suppress plasma instabilities in prototypes for thermonuclear fusion reactors.

"I believe these ideas are going to flourish in several of these fields," said Urzhumov. "It is a very exciting time."

Explore further: Effortless sailing with fluid flow cloak

More information: Dean Culver et al. Forced underwater laminar flows with active magnetohydrodynamic metamaterials, Physical Review E (2017). DOI: 10.1103/PhysRevE.96.063107

Journal reference: Physical Review E search and more info website


TOPICS: Business/Economy; Hobbies; Military/Veterans; Science
KEYWORDS: boat; marine; ship; stealthy
Navigation: use the links below to view more comments.
first 1-2021-26 next last

A rough prototype of the proposed water cloaking device being tested inside of an aquarium. Credit: Duke University

1 posted on 12/11/2017 1:48:34 PM PST by Red Badger
[ Post Reply | Private Reply | View Replies]

To: Red Badger

Oh good. We used to be smart enough to keep this sort of thing secret for awhile and let the Navy perfect the application. Then again, the researchers who figured it out are probably Chinese anyway.


2 posted on 12/11/2017 1:55:16 PM PST by katana
[ Post Reply | Private Reply | To 1 | View Replies]

To: Red Badger

Google “USO” and they probably already use this sorta concept..


3 posted on 12/11/2017 2:02:09 PM PST by GraceG ("It's better to have all the Right Enemies, than it is to have all the Wrong Friends.")
[ Post Reply | Private Reply | To 1 | View Replies]

To: katana

Yaroslav Urzhumov


4 posted on 12/11/2017 2:05:25 PM PST by Red Badger (Road Rage lasts 5 minutes. Road Rash lasts 5 months!.....................)
[ Post Reply | Private Reply | To 2 | View Replies]

To: Red Badger

“We can’t hear anything Skipper, but there’s a hell of a EM ping right over there, detectors are going haywire.”


5 posted on 12/11/2017 2:05:59 PM PST by Abathar (Proudly posting without reading the article carefully since 2004)
[ Post Reply | Private Reply | To 1 | View Replies]

To: Red Badger

Watch for this break through to be used in the America’s Cup yacht racing.........


6 posted on 12/11/2017 2:07:34 PM PST by Hot Tabasco (My cat is not fat, she is just big boned........)
[ Post Reply | Private Reply | To 1 | View Replies]

To: Red Badger
Why not paint the ships with this ?


7 posted on 12/11/2017 2:09:20 PM PST by UCANSEE2 (Lost my tagline on Flight MH370. Sorry for the inconvenience.)
[ Post Reply | Private Reply | To 1 | View Replies]

To: Red Badger

“MADMAN!”


8 posted on 12/11/2017 2:13:28 PM PST by TexasTransplant (High quality, Low price, Speedy executionÂ…pick any two)
[ Post Reply | Private Reply | To 1 | View Replies]

To: Hot Tabasco

Have you seen the new boat for America’s cup? It uses submerged airfoil (wayerfoils) to completely lift the boat out of the water and the hydrofoils provide stability below. A really amazing sailboat.


9 posted on 12/11/2017 2:13:35 PM PST by blackdog
[ Post Reply | Private Reply | To 6 | View Replies]

To: Hot Tabasco

I think engineers from Dubai designed and built the boat.


10 posted on 12/11/2017 2:14:55 PM PST by blackdog
[ Post Reply | Private Reply | To 6 | View Replies]

To: Abathar
Laughed so hard my dog came over to make sure I was ok.

Very funny, and probably true.

11 posted on 12/11/2017 2:24:43 PM PST by 11Bush
[ Post Reply | Private Reply | To 5 | View Replies]

To: TexasTransplant

re: “MADMAN!”

Back in 1966 I flew with VP-24 in the P2V. The Magnetic Anomaly Detector was fascinating. Also liked the way the smoke/flare block was shot aft by an air cannon regulated by the airspeed. It was fired rearward at the same velocity as forward airspeed, so it dropped straight down over the MAD contact.

Neat!


12 posted on 12/11/2017 2:35:57 PM PST by BwanaNdege ("The church ... is not the master or the servant of the state, but the conscience" - Luther)
[ Post Reply | Private Reply | To 8 | View Replies]

To: Red Badger
Urzhumov is turning to electromagnetic fields and the dense concentration of charged particles found in saltwater.

I had this same idea, back when The Hunt for Red October came out, and I learned about MHD drives. As a boat owner, I was fascinated with drag reduction ideas. I figured, if an MHD could in theory move sea water that way, one should be able to do so on the water contacting parts of the vessel. Dang..

13 posted on 12/11/2017 2:54:40 PM PST by Paradox (Don't call them mainstream, there is nothing mainstream about the MSM.)
[ Post Reply | Private Reply | To 1 | View Replies]

To: blackdog
Have you seen the new boat for America’s cup?

Yep, a super duper catamaran.........

A close high school friend worked with BMW Oracle Racing, multihull challenge for the America's Cup. He held the position of Manager of the Instrumentation, Analysis and Performance Optimization Department with his primary focus on their sails.......He had worked for Dennis Connor since about 1984....

The switch to catamarans in that campaign was his last employment with them. He resigned afterwards since the America's Cup yachts became to high tech and lost all semblance of the yachts that the Cup was originally created for.

14 posted on 12/11/2017 3:12:04 PM PST by Hot Tabasco (My cat is not fat, she is just big boned........)
[ Post Reply | Private Reply | To 9 | View Replies]

To: Hot Tabasco

Back in 77/78? I was in Newport for the cup. I remember Ted Turner being on our boat for a bit. I was too young to take it all in. I was in my teens and chasing tail most the time.


15 posted on 12/11/2017 3:18:11 PM PST by blackdog
[ Post Reply | Private Reply | To 14 | View Replies]

To: Hot Tabasco

I have a big picture of Dennis on the bow of his Stars&Stripes holding an anchor I made for him. I was shocked when we got the order, because I had assumed that everything would be “light weight”, but there were regs stipulating anchor weight.


16 posted on 12/11/2017 3:19:45 PM PST by crosdaddy
[ Post Reply | Private Reply | To 14 | View Replies]

To: Red Badger

Don’t need water you need this!

https://www.youtube.com/watch?v=sc9wsVGDSSs


17 posted on 12/11/2017 3:57:05 PM PST by Davy Crocket
[ Post Reply | Private Reply | To 1 | View Replies]

To: crosdaddy
holding an anchor I made for him.

Interesting......Considering that weight is a factor on those boats and whichever port they are harbored in, they're always docked when not on sea........Why would they have an anchor which would take up space in the front hull which is usually reserved for additional sails?

18 posted on 12/11/2017 4:04:57 PM PST by Hot Tabasco (My cat is not fat, she is just big boned........)
[ Post Reply | Private Reply | To 16 | View Replies]

To: crosdaddy; Tabasco; blackdog
.......He had worked for Dennis Connor since about 1984....

Dennis Connor never forgot his beginnings with Sunfish sailboats, and occasionally drops in to chat at Sunfish sailing forum discussions.

19 posted on 12/11/2017 4:14:18 PM PST by Does so (McAuliffe's Charlottesville...and...The Walter Duranty Press"...)
[ Post Reply | Private Reply | To 16 | View Replies]

To: Red Badger
Urzhumov says that for an actual ship or submarine to ever use such a device, it would need a nuclear reactor to power it, given the enormous energy requirements to cloak an object of that size. That does not mean, however, that a smaller diesel vessel could not power a smaller cloaking device to shield potentially vulnerable protrusions from detection.

Urzhumov also says that his theories and calculations have many potential applications outside of the ocean. Similar designs could be used to create a distributed ion propulsion system for spacecraft or to suppress plasma instabilities in prototypes for thermonuclear nuclear fusion reactors.

Do you realize what that means! Controlled nuclear fusion reactors are only ten 10 years away!

20 posted on 12/11/2017 4:52:09 PM PST by conservatism_IS_compassion (Presses can be 'associated,' or presses can be independent. Demand independent presses.)
[ Post Reply | Private Reply | To 1 | View Replies]


Navigation: use the links below to view more comments.
first 1-2021-26 next last

Disclaimer: Opinions posted on Free Republic are those of the individual posters and do not necessarily represent the opinion of Free Republic or its management. All materials posted herein are protected by copyright law and the exemption for fair use of copyrighted works.

Free Republic
Browse · Search
General/Chat
Topics · Post Article

FreeRepublic, LLC, PO BOX 9771, FRESNO, CA 93794
FreeRepublic.com is powered by software copyright 2000-2008 John Robinson