Free Republic
Browse · Search
General/Chat
Topics · Post Article

Skip to comments.

A Clean Barrel
The National Rifleman ^ | October 2009 | John Barsness

Posted on 10/30/2009 8:24:14 PM PDT by Retain Mike

Many obsessive riflemen “know” a lot of things about the insides of their barrels. They know they must break-in barrels and that any bore only slightly smudged by the passage of bullets will shoot less accurately compared with a barrel as clean as Aunt Josie’s kitchen floor.

First, let’s examine “proper” barrel break-in. According to just about everybody, this is accomplished by firing one shot, cleaning the barrel of all powder and copper fouling, firing another shot, cleaning, etc. Advice on how long to continue this tedious routine varies from 10 to 30 rounds. The procedure supposedly smooths the bore, making it much more accurate and less prone to jacket fouling. Some even claim that a barrel that isn’t broken-in “properly” will be ruined forever, unable to produce the half-inch groups necessary for the slaying of white-tailed deer.

(Excerpt) Read more at americanrifleman.org ...


TOPICS: Hobbies; Military/Veterans; Sports
KEYWORDS: accuracy; banglist; barrel; cleaning; rifle
Navigation: use the links below to view more comments.
first previous 1-2021-4041-57 last
To: Envisioning
Ed's Red Gun Cleaner
41 posted on 10/31/2009 5:11:44 PM PDT by mylife (The Roar Of The Masses Could Be Farts)
[ Post Reply | Private Reply | To 39 | View Replies]

By Ed Harris Rev. 12-27-94

Three years ago I mixed my first “Ed’s Red” and I still think the “recipe” is a great idea. If you have never tried it, or maybe lost the recipe, I urge you save this and mix your own. My followers on the FIREARMS Echo think it’s the best thing since smokeless powder! Therefore, I’ll summarize the story again for the passing parade that didn’t get it the first time...

I originally did this because I used a lot of rifle bore cleaner and was deterred by the high price of commercial products. I knew there was no technical reason why you could not mix an effective bore cleaner using common hardware store ingredients which would be inexpensive, effective, and provide reasonable corrosion protection and adequate lubrication.

The “recipe” is based on proven principles and incorporates two polar and two nonpolar ingredients. It is adapted from a formula in Hatcher’s Notebook, Frankford Arsenal Cleaner No.18, but substituting equivalent modern materials. I had the help of an organic chemist in doing this and we knew there would be no “surprises” The original Hatcher recipe called for equal parts of acetone, turpentine, Pratts Astral Oil and sperm oil, and optionally 200 grams of lanolin added per liter.

Pratts Astral oil was nothing more than acid free, deodorized kerosene. We use K-1 kerosene of the type normally sold for indoor space heaters. An inexpensive, effective substitute for sperm oil is Dexron (II, IIe or III) automatic transmission fluid. Prior to about 1950 that most ATF’s were sperm oil based, but during WWII a synthetic was developed for use in precision instruments. With the great demand for automatic transmission autos after WWII, sperm oil was no longer practical to produce ATF in the quantity demanded, so the synthetic material became the basis for the Dexron fluids we know today. The additives in ATFs which include organometallic antioxidants and surfactants, make it highly suitable for our intended purpose.

Hatcher’s original formula used gum spirits of turpentine, but turpentine is expensive and highly flammable. Cheaper and safer is aliphatic mineral spirits, which is a petroleum based “safety solvent” used for thinning oil based paints and as automotive parts cleaner. It is commonly sold under the names “odorless mineral spirits,” “Stoddard Solvent” or “Varsol”.

There isn’t anything in Ed’s Red which will chemically remove copper fouling, but it does a better job on carbon residue than anything out there. Several users have told me, that with exclusive use of “ER” does reduce the buildup of copper fouling, because it removes old impacted fouling which is left by other cleaners, reducing the adhesion of abraded metal to the surface, and leaving a cleaner surface which reduces subsequent fouling. It appears that “ER” will actually remove metal fouling it if you let it “soak” so the surfactants will do the job, though you may have to be patient.

The lanolin is optional. The cleaner works quite well without it. Incorporating the lanolin makes the cleaner easier on the hands, and provides better residual lubrication and corrosion protection if you use the cleaner as a protectant for long term storage. If you want to minimize cost, you can leave the lanolin out and save about $8 per gallon. Mix some yourself. I know it will work as well for you as it does for me.

CONTENTS: Ed’s Red Bore Cleaner

1 part Dexron II, IIe or III ATF, GM Spec. D-20265 or later.

1 part Kerosene - deodorized, K1

1 part Aliphatic Mineral Spirits, Fed. Spec. TT-T-2981F, CAS #64741-49-9, or substitute “Stoddard Solvent”, CAS #8052-41-3, or equivalent, (aka “Varsol”)

1 part Acetone, CAS #67-64-1.

(Optional up to 1 lb. of Lanolin, Anhydrous, USP per gallon, OK to substitute Lanolin, Modified, Topical Lubricant, from the drug store)

MIXING INSTRUCTIONS:

Mix outdoors, in good ventilation. Use a clean 1 gallon metal, chemical-resistant, heavy gage PET or PVC plastic container. NFPA approved plastic gasoline storage containers are also OK. Do NOT use HDPE, which is breathable because the acetone will evaporate. The acetone in ER will attack HDPE in about 6 months, making a heck of a mess!

Add the ATF first. Use the empty container to measure the other components, so that it is thoroughly rinsed. If you incorporate the lanolin into the mixture, melt this carefully in a double boiler, taking precautions against fire. Pour the melted lanolin it into a larger container, rinsing the lanolin container with the bore cleaner mix, and stirring until it is all dissolved.

I recommend diverting a small quantity, up to 4 ozs. per quart of the 50-50 ATF/kerosene mix for use as an “ER-compatible” gun oil. This can be done without impairing the effectiveness of the mix.

INSTRUCTIONS FOR USING

Ed’s Red Bore Cleaner:

1. Open the firearm action and ensure the bore is clear. Cleaning is most effective when done while the barrel is still warm to the touch from firing. Saturate a cotton patch with bore cleaner, wrap or impale on jag and push it through the bore from breech to muzzle. The patch should be a snug fit. Let the first patch fall off and do not pull it back into the bore.

2. Wet a second patch, and similarly start it into the bore from the breech, this time scrubbing from the throat area forward in 4-5” strokes and gradually advancing until the patch emerges out the muzzle. Waiting approximately 1 minute to let the bore cleaner soak will improve its action.

3. For pitted, heavily carbon-fouled “rattle battle” guns, leaded revolvers or neglected bores a bronze brush wet with bore cleaner may be used to remove stubborn deposits. This is unnecessary for smooth, target-grade barrels in routine use.

4. Use a final wet patch pushed straight through the bore to flush out loosened residue dissolved by Ed’s Red. Let the patch fall off the jag without pulling it back into the bore. If you are finished firing, leaving the bore wet will protect it from rust for up to 30 days. If the lanolin is incorporated into the mixture, it will protect the firearm from rust for up to two years. For longer term storage I recommend use of Lee Liquid Alox as a Cosmolene substitute. “ER” will readily remove hardened Alox or Cosmolene.

5. Wipe spilled Ed’s Red from exterior surfaces before storing the gun. While Ed’s Red is harmless to blue and nickel finishes, the acetone it contains is harmful to most wood finishes).

6. Before firing again, push two dry patches through the bore and dry the chamber, using a patch wrapped around a suitably sized brush or jag. First shot point of impact usually will not be disturbed by Ed’s Red if the bore is cleaned as described.

7. I have determined to my satisfaction that when Ed’s Red is used exclusively and thoroughly, that hot water cleaning is unnecessary after use of Pyrodex or military chlorate primers. However, if bores are not wiped between shots and shots and are heavily caked from black powder fouling, hot water cleaning is recommended first to break up heavy fouling deposits. Water cleaning should be followed by a thorough flush with Ed’s Red to prevent after-rusting which could result from residual moisture. It is ALWAYS good practice to clean TWICE, TWO DAYS APART whenever using chlorate primed ammunition, just to make sure you get all the residue out.

LABEL AND OBLIGATORY SAFETY WARNINGS:

RIFLE BORE CLEANER

CAUTION:

HARMFUL IF SWALLOWED.

KEEP OUT OF REACH OF CHILDREN

1.Flammable mixture. Keep away from heat, sparks or flame.

2.FIRST AID, If swallowed DO NOT induce vomiting, call physician immediately. In case of eye contact immediately flush thoroughly with water and call a physician. For skin contact wash thoroughly.

3.Use with adequate ventilation. Avoid breathing vapors or spray mist. It is a violation of Federal law to use this product in a manner inconsistent with its labelling. Reports have associated repeated and prolonged occupational overexposure to solvents with permanent brain and nervous system damage. If using in closed armory vaults lacking forced air ventilation wear respiratory protection meeting NIOSH TC23C or equivalent. Keep container tightly closed when not in use.

This “Recipe” is placed in the public domain, and may be freely distributed provided that it is done so in its entirely with all instructions and safety warnings included herein, and that proper attribution is given to the author.

In Home Mix We Trust, Regards, Ed


42 posted on 10/31/2009 5:14:07 PM PDT by mylife (The Roar Of The Masses Could Be Farts)
[ Post Reply | Private Reply | To 41 | View Replies]

To: Squantos
I just like the accuracy and reliability of the M1A as well as it’s ability to reach out for the long stop shot !

No doubt about that. Mine's a no kidding 800 yard rifle. Ain't nothing in a half mile circle going to be alive if I decide otherwise.

But it's big, it's heavy, and it's unwieldy in close quarters. So in my SHTF scenario, at least in my area, I think it'll be the AK over the M1A. Or perhaps I put the AK in Mrs. L's hands and back her up with the M1A......best of both worlds so to speak.

43 posted on 10/31/2009 5:27:56 PM PDT by Lurker (The avalanche has begun. The pebbles no longer have a vote.)
[ Post Reply | Private Reply | To 38 | View Replies]

To: Retain Mike

bump


44 posted on 10/31/2009 5:35:01 PM PDT by Charlespg (The Mainstream media is the enemy of democracy destroy the mainstream media)
[ Post Reply | Private Reply | To 1 | View Replies]

To: Retain Mike

;-)


45 posted on 10/31/2009 7:19:52 PM PDT by mad_as_he$$ (Beneath this mask there is an idea, Mr. Creedy, and ideas are bulletproof. V for victory)
[ Post Reply | Private Reply | To 35 | View Replies]

To: Squantos
I meant to get some while I was out earlier, but was in a bit of a hurry... the oldest blew up the P/S on his PC and needs it for school....and I just did get it all put back together awhile ago. :-) But I "think" I saw Kroil at Wally World and I'll get some tomorrow!

We need to break in a new contour #6 Shilen .308 barrel. :-) Kroil will help! :-)
46 posted on 10/31/2009 7:20:20 PM PDT by hiredhand (Understand the CRA and why we're facing economic collapse - see my about page.)
[ Post Reply | Private Reply | To 31 | View Replies]

To: Lurker

That’s a good woman that will take point .....:o)


47 posted on 10/31/2009 7:42:23 PM PDT by Squantos (Be polite. Be professional. But have a plan to kill everyone you meet)
[ Post Reply | Private Reply | To 43 | View Replies]

To: hiredhand

Is that the new bbl on the old 243 ?


48 posted on 10/31/2009 7:57:17 PM PDT by Squantos (Be polite. Be professional. But have a plan to kill everyone you meet)
[ Post Reply | Private Reply | To 46 | View Replies]

To: Squantos
Yepper! That be the one! It's gonna be SWEET! It was sweet before the chop job! We've got some new friends with a beaver problem and it's open season on them here because they're a serious problem from what I understand. At least the fish and game authorities think they're enough of a problem to declare an open season! The new rifle needs to shoot sub MOA at 300 yards (which I don't think is much to ask) because our area of cover is about that distance. It shouldn't be a problem. It was built by a well known and reputable builder over this way and he cut the chamber on the shy side of go/no-go so it "should" never have excessive headspace. He also told me that he cut it so that I should be able to seat everything except for the shortest bullets (such as 110gr) to enage lands on lock-up! I'll be sure and send you photos of Killer when he shoots it for the first time! :-)
49 posted on 10/31/2009 8:22:37 PM PDT by hiredhand (Understand the CRA and why we're facing economic collapse - see my about page.)
[ Post Reply | Private Reply | To 48 | View Replies]

To: Retain Mike

Bump, for good advice and later reading


50 posted on 11/01/2009 11:55:01 AM PST by correctthought (Hippies, want to change the world, but all they ever do is smoke pot and smell bad)
[ Post Reply | Private Reply | To 1 | View Replies]

To: wendy1946

I’ve looked around and haven’t been able to find a cheap K31. Any suggestions?


51 posted on 11/01/2009 2:26:10 PM PST by smokingfrog (No man's life, liberty or property is safe while the legislature is in session. I AM JIM THOMPSON)
[ Post Reply | Private Reply | To 8 | View Replies]

To: smokingfrog
One... I picked up three of the things when they were selling for 100 - 130 and what I found was that generally, normal for them was that the metal was pristine as if never fired and the wood totally beat to **** and apparently they were being used as $1500 walking sticks up in the Alps. They never saw corrosive primers and were never used in a war.

The walnut stocks could usually be recovered: you take off all the finish, steam out as much of all dents as you can, sand what you can't, and then refinish, generally looks pretty good, and there's actually one of the companies out there with new sporter stocks for them for around $70 and that works. But the beech-wood stocks are hopeless and if you can find one with a beech stock, teh seller might still take a hundred or two for it.

52 posted on 11/01/2009 4:31:40 PM PST by wendy1946
[ Post Reply | Private Reply | To 51 | View Replies]

To: wendy1946

I guess I missed the boat by not getting one when they were cheaper. I too have noticed that many of them look like crud. It’s good to know that most are probably still mechanically sound, even though they might not look so good.

What do you think of this one?
http://www.impactguns.com/store/MK31-DSCW.html

What about the availability of ammo?


53 posted on 11/01/2009 4:45:23 PM PST by smokingfrog (No man's life, liberty or property is safe while the legislature is in session. I AM JIM THOMPSON)
[ Post Reply | Private Reply | To 52 | View Replies]

To: smokingfrog
Looks good, I'd want seller's assurance that the bore was good and the numbers matched before buying it over the net but that looks like the walnut stock.

Ammo, I see hunting ammo made by a Serbian group called 'Partisan' being sold at gun shows or you can load your own, Huntington's of California has dies and new brass ( http://www.huntingtons.com/cases_graf.html ), the K31 caliber is called 7.5x55 for some reason despite the K31 being basically a 308 caliber rifle.

Again the overall cartridge length given in books is for that Swiss fmj bullet and is about a whole quarter inch wrong for normal 308 hunting bullets. You can load those Graf cases with ordinary Sierra or whatever 308 168gr hunting bullets but you simply walk the die in a turn or two at a time until you get a cartridge that the bolt closes over easily, and that's your real cartridge length.

54 posted on 11/01/2009 9:40:36 PM PST by wendy1946
[ Post Reply | Private Reply | To 53 | View Replies]

To: smokingfrog

One other thing, another BIG difference between the K31 and any sort of Mauser ias that there has never been a reasonable way to put a scope on old Mausers while there is a simple adapter for scopes for the K31 which goes in in five minutes.


55 posted on 11/01/2009 9:42:27 PM PST by wendy1946
[ Post Reply | Private Reply | To 53 | View Replies]

To: wendy1946
...the K31 caliber is called 7.5x55 for some reason despite the K31 being basically a 308 caliber rifle.

If ya ever get bored enough to do the math, 7.5 mm is .308 inches. 7.62 mm is .311 inches, a common bore diameter for the commies. Don't know why NATO uses 7.62 as a designation for .308 bullets.

56 posted on 11/02/2009 9:27:56 AM PST by gundog (And a babe shall lead them. -Sarah 20:12)
[ Post Reply | Private Reply | To 54 | View Replies]

To: gundog; wendy1946
"7.5 mm is .308 inches. 7.62 mm is .311 inches...

No. 7.5 mm is 0.295. .308 is the barrel's groove diameter and the bullet dia., which measures 7.82mm(0.308"). The barrel dia. for the .308 is 7.62mm. That means the lands are 0.1mm(0.004") high in a .308 barrel.

57 posted on 11/02/2009 12:12:49 PM PST by spunkets
[ Post Reply | Private Reply | To 56 | View Replies]


Navigation: use the links below to view more comments.
first previous 1-2021-4041-57 last

Disclaimer: Opinions posted on Free Republic are those of the individual posters and do not necessarily represent the opinion of Free Republic or its management. All materials posted herein are protected by copyright law and the exemption for fair use of copyrighted works.

Free Republic
Browse · Search
General/Chat
Topics · Post Article

FreeRepublic, LLC, PO BOX 9771, FRESNO, CA 93794
FreeRepublic.com is powered by software copyright 2000-2008 John Robinson