Just kidding! Good luck finding what you need!
Get a pole barn and pick the design you want. Budget enough to insulate it yourself and put in a wood stove if you are in a cold climate and prosper.
I highly recommend a concrete slab floor but gravel works just fine.
Seems to me I often see knocked down Steel Buildings of various sizes, thus prices in the local Recycler, and Green Sheet, and all on sale during this period of economic distress. Good time to buy.
These organizations usually are able to supply all you need to get your permits with the purchase of their products so I have been led to believe.
I did a search “prefab steel buildings”, and came up immediately with a number of references. Perhaps you could find something in your area. Worth a look.
You want a wood building or steel? (the outside doesn’t have to be steel, even if the frame is)
Looks simple enough and has features to create elevations which most other cheap and free packages don’t.
If she suggests you put a bedroom on the second floor, that could be bad news. It’s either for you or her mother.
Get a used Mark V ( or now they have a Mark 7 version)
You might look around to see if you can find a kit of some kind. When I built my woodshed I found it was just as cheap to buy a kit from Vermont Shed as it was to get the lumber and design my own.
Of course it depends where you live. You don’t want to truck it across the country. But you might look around the internet for ideas.
Here’s Vermont shed. Their largest size seems to be 12 x 16, but I’m sure there are larger ones around. Worth a look, anyway.
You’re moniker tells me you already have the answer, but I thought I’d ask anyway:
What’s the new out-building going to do to your tax bill?
Mainly just curious, because I had the same plan and filed with the township but had to abandon it due to sudden financial exigencies.
I think now, that if a big wad of money fell into my lap, that I’d seriously consider remodeling my current space, especially with respect to storage, to make it more functional.
Increasing the footprint should be the last option.
Again, just a thought.
By the way, I think Google has a drawing program.
Good luck! I’m jealous.
A thought - many local collages have AutoCad classes. See if there is a starving student that you could have work on a set of plans.
Define your requirements carefully first. Take extra time to be sure you don’t end up with a bit “aw crap” afterward. Consider storage, lighting, ventilation, electrical, and access. It’s awfully nice to be able to open a roll-up door to get large machinery or stock in/out. Everyone says “build twice as big as you think you’ll need”. My shop is 24 by 32 feet and all I can say is “everyone was right”. Consider your budget carefully, I think it’s much smarter to stick-build using standard building materials on a good (frost-free, if you’re in the north) foundation than to mess around with pole barns and metal buildings. The best cost leverage comes from using materials that are sold in highest quantity. And don’t leave yourself open for a nasty surprise form the building inspector. Good luck, you won’t regret doing it right.
Thinking about what you said...I would go prefab. There would be little or no cost overrun, the contracter is connected with the factory so he is familiar with the model, and they already have what you need for permits before you sign.
Just my thought on how to get the most for the least.
I just finished a 16 by 24 barn shed for my neighbor. With storage on the second floor.
I am a builder. Do you have any experience in what you are trying to do?
I don’t have any ideas for your building but I’ll say that you seem to have been blessed in your choice for wife.
build the roof and door high enough that you can install a good vehicle lift.
From experience, what ever you build for a workshop will be too small in 5 years, 10 years tops.
Check with Lowes, you can get a kit with everything needed.
Costs @ 30-35/square foot
You have mail - twice