Replies

Cool post about hardware. What about OS? :)

LOL!

I believe that the Top500 is 100% Linux these days. I honestly have not looked for a while.

Here is a summary of the systems in the Top 10:
Frontier remains the No. 1 system in the TOP500. This HPE Cray EX system is the first US system with a performance exceeding one Exaflop/s. It is installed at the Oak Ridge National Laboratory (ORNL) in Tennessee, USA, where it is operated for the Department of Energy (DOE). It currently has achieved 1.194 Exaflop/s using 8,699,904 cores. The HPE Cray EX architecture combines 3rd Gen AMD EPYC™ CPUs optimized for HPC and AI, with AMD Instinct™ 250X accelerators, and a Slingshot-11 interconnect.
Aurora achieved the No. 2 spot by submitting an HPL score of 585 Pflop/s measured on half of the full system. It is installed at the Argonne Leadership Computing Facility, Illinois, USA, where it is also operated for the Department of Energy (DOE). This new Intel system is based on HPE Cray EX - Intel Exascale Compute Blades. It uses Intel Xeon CPU Max Series processors, Intel Data Center GPU Max Series accelerators, and a Slingshot-11 interconnect.
Eagle the new No. 3 system is installed by Microsoft in its Azure cloud. This Microsoft NDv5 system is based on Xeon Platinum 8480C processors and NVIDIA H100 accelerators and achieved an HPL score of 561 Pflop/s.
Fugaku, the No. 4 system, is installed at the RIKEN Center for Computational Science (R-CCS) in Kobe, Japan. It has 7,630,848 cores which allowed it to achieve an HPL benchmark score of 442 Pflop/s.
The (again) upgraded LUMI system, another HPE Cray EX system installed at EuroHPC center at CSC in Finland is now the No. 5 with a performance of 380 Pflop/s. The European High-Performance Computing Joint Undertaking (EuroHPC JU) is pooling European resources to develop top-of-the-range Exascale supercomputers for processing big data. One of the pan-European pre-Exascale supercomputers, LUMI, is located in CSC’s data center in Kajaani, Finland.
The No. 6 system Leonardo is installed at a different EuroHPC site in CINECA, Italy. It is an Atos BullSequana XH2000 system with Xeon Platinum 8358 32C 2.6GHz as main processors, NVIDIA A100 SXM4 40 GB as accelerators, and Quad-rail NVIDIA HDR100 Infiniband as interconnect. It achieved a Linpack performance of 238.7 Pflop/s.
Summit, an IBM-built system at the Oak Ridge National Laboratory (ORNL) in Tennessee, USA, is now listed at the No. 7 spot worldwide with a performance of 148.8 Pflop/s on the HPL benchmark, which is used to rank the TOP500 list. Summit has 4,356 nodes, each one housing two POWER9 CPUs with 22 cores each and six NVIDIA Tesla V100 GPUs each with 80 streaming multiprocessors (SM). The nodes are linked together with a Mellanox dual-rail EDR InfiniBand network.
The MareNostrum 5 ACC system is new at No. 8 and installed at the EuroHPC/Barcelona Supercomputing Center in Spain. This BullSequana XH3000 system uses Xeon Platinum 8460Y processors with NVIDIA H100 and Infiniband NDR200. It achieved 183.2 Pflop/s HPL performance.
The new Eos system listed at No. 9 is a NVIDIA DGX SuperPOD based system at NVIDIA, USA. It is based on the NVIDIA DGX H100 with Xeon Platinum 8480C processors,N VIDIA H100 accelerators, and Infiniband NDR400 and it achieves 121.4 Pflop/s.
Sierra, a system at the Lawrence Livermore National Laboratory, CA, USA is at No. 10. Its architecture is very similar to the #7 system’s Summit. It is built with 4,320 nodes with two POWER9 CPUs and four NVIDIA Tesla V100 GPUs. Sierra achieved 94.6 Pflop/s.

I was wrong--I just looked up the #1 system, and it's running HPE Cray OS.