Free Republic
Browse · Search
News/Activism
Topics · Post Article

Skip to comments.

Harley Announces Recall of 13,400 Bikes
AP (Absolute Prevarication) ^ | 11/23/2005 | Staff

Posted on 11/23/2005 12:31:34 PM PST by Red Badger

click here to read article


Navigation: use the links below to view more comments.
first previous 1-20 ... 301-320321-340341-360 ... 381-396 next last
To: Poser

"My Harley delivers over 100 pound feet of torque from 2400 to 6000 rpm"

Nice numbers, by the way. What's the displacement?


321 posted on 11/25/2005 12:12:45 PM PST by -YYZ-
[ Post Reply | Private Reply | To 315 | View Replies]

To: Melas

You are right. Power to weight ratio makes a hella difference. I have ridden a RocketIII. Unbeleivable torque. But the power to weight ratio is the whole point behind our arguement. I know you think that my whole point is to bash and insult harley riders. Most of those things were retaliations. nonetheless, I apoplogize. You are talking to a grandfather as well with 30 years on two wheels. And I ride sport bikes.


322 posted on 11/25/2005 12:14:33 PM PST by HOTTIEBOY (Maybe in your house. Not in mine.)
[ Post Reply | Private Reply | To 318 | View Replies]

To: Poser
Sounds cool.

If you wanted to eliminate the mouse trap, Can do so by getting the later model shorter clutch rod, cut off the vertical part close to where the bend is, and drill out the tip to accept the end of the clutch cable, the throw then becomes enough the disengage the clutch, because the cable is now closer to the pivot point. Just need to get one of them horsheshoe shaped cable end holders that bolt to the seat post just below the coil. Some just like the looks of the moustrap. Kinda like running the early style oil filter.

Overall, you ride looks and sounds very usable.

323 posted on 11/25/2005 12:17:40 PM PST by toros
[ Post Reply | Private Reply | To 319 | View Replies]

To: HOTTIEBOY

Bland is OK -- thanks for the read.


324 posted on 11/25/2005 12:21:12 PM PST by ReaganCowboy (History books are written by winners.)
[ Post Reply | Private Reply | To 284 | View Replies]

To: HOTTIEBOY


I took this shot in Vilagarcia, Spain last summer, the bike certainly caught my attention.

I know nothing about motorbikes but I find the thread very interesting.

325 posted on 11/25/2005 12:30:56 PM PST by Cardhu
[ Post Reply | Private Reply | To 322 | View Replies]

To: -YYZ-

"Nice numbers, by the way. What's the displacement?"

Note: Those numbers aren't from the '48. They are from an S&S 113ci motor on an FXR.

My 95ci Electra-glide is way better for touring.

I get about 8hp from my 1966 150cc Vespa and its fun too.


326 posted on 11/25/2005 12:37:25 PM PST by Poser
[ Post Reply | Private Reply | To 321 | View Replies]

To: Cardhu
To all: Just for the record, that is a beautiful bike.

and looking at your profile, might I add that I find your HTML skills impressive.
327 posted on 11/25/2005 12:40:23 PM PST by HOTTIEBOY (Maybe in your house. Not in mine.)
[ Post Reply | Private Reply | To 325 | View Replies]

To: toros

"Some just like the looks of the moustrap. Kinda like running the early style oil filter."

I like the mousetrap because I can hold it with one finger in traffic. It was a great design. I had to put one of those White Bros. "Sissy boy" clutch assist extensions on my Electra-Glide. The 95ci clutch spring was just too tiring in traffic.


328 posted on 11/25/2005 12:40:25 PM PST by Poser
[ Post Reply | Private Reply | To 323 | View Replies]

To: R. Scott

Nope definitely not the first recall, though Harley has done a good job of making them as minor as possible.


329 posted on 11/25/2005 12:43:11 PM PST by blarney
[ Post Reply | Private Reply | To 294 | View Replies]

To: -YYZ-

If I got you confused with someone else then I offer my sincere apologies. I do admit I get lost sometimes trying to figure out who is posting to whom on this board.


330 posted on 11/25/2005 12:44:37 PM PST by blarney
[ Post Reply | Private Reply | To 295 | View Replies]

To: HOTTIEBOY

I have never said a harley is faster. You seem to be accrediting things to me I haven't said.


331 posted on 11/25/2005 12:45:05 PM PST by blarney
[ Post Reply | Private Reply | To 298 | View Replies]

To: R. Scott

Lucas is what really hurt the British bikes imho.


332 posted on 11/25/2005 12:45:54 PM PST by blarney
[ Post Reply | Private Reply | To 300 | View Replies]

To: blarney

OK my fault. You said V-Twin.


333 posted on 11/25/2005 12:47:21 PM PST by HOTTIEBOY (Maybe in your house. Not in mine.)
[ Post Reply | Private Reply | To 331 | View Replies]

To: Melas

Well you have helped me put my foot in my mouth. It seems I truly was giving credit to yyz for things he didn't say.

YYZ my apologies once again, I was wrong for engaging you like I did.


334 posted on 11/25/2005 12:47:49 PM PST by blarney
[ Post Reply | Private Reply | To 303 | View Replies]

To: HOTTIEBOY

Thanks, I find your knowledge of this subject very impressive too.


335 posted on 11/25/2005 12:47:58 PM PST by Cardhu
[ Post Reply | Private Reply | To 327 | View Replies]

To: -YYZ-

That is another good point about the rice bikes. I remember staying on a busa till around 80mph(it's been a few years so with time I could be being more dramatic) I was in the big bear mountains and going from as low as around 20mph up to around 80mph give or take. It was suprising and nice how it's power band incresed at those higher rpms.

I would say at this point there probably isn't a bike I haven't rode. Though I must say those darned BSA's and all that opposite shifting and crap like to got me killed a couple of times.


336 posted on 11/25/2005 12:51:14 PM PST by blarney
[ Post Reply | Private Reply | To 305 | View Replies]

To: Poser

Longevity for the most part just depends on how you treat and take care of your scoot. Yes all companies have a failure rate but all in all I doubt any bike is more reliable at this point.


337 posted on 11/25/2005 12:53:46 PM PST by blarney
[ Post Reply | Private Reply | To 311 | View Replies]

To: blarney

S'alright. We all got a little carried away. Well, I did anyway. I do apologize for my name-calling.

I must admit I've been surprised over the years to learn just what can be done with a Harley-type motor, given enough dollars for high quality parts. Several of the production-based top speed records at Bonneville are held by Harley-engined machines. Apparently there's almost no limit to how big of jugs you can bolt onto the stock engine cases of these engines, and with the right internals still get them to hold together (at least for a while :) )


338 posted on 11/25/2005 12:54:53 PM PST by -YYZ-
[ Post Reply | Private Reply | To 330 | View Replies]

To: blarney

"Longevity for the most part just depends on how you treat and take care of your scoot."

Good point


339 posted on 11/25/2005 12:55:45 PM PST by HOTTIEBOY (Maybe in your house. Not in mine.)
[ Post Reply | Private Reply | To 337 | View Replies]

To: Poser

That Triumph Rocket is a freakin monster. man it is smooth though.


340 posted on 11/25/2005 12:56:15 PM PST by blarney
[ Post Reply | Private Reply | To 315 | View Replies]


Navigation: use the links below to view more comments.
first previous 1-20 ... 301-320321-340341-360 ... 381-396 next last

Disclaimer: Opinions posted on Free Republic are those of the individual posters and do not necessarily represent the opinion of Free Republic or its management. All materials posted herein are protected by copyright law and the exemption for fair use of copyrighted works.

Free Republic
Browse · Search
News/Activism
Topics · Post Article

FreeRepublic, LLC, PO BOX 9771, FRESNO, CA 93794
FreeRepublic.com is powered by software copyright 2000-2008 John Robinson