Posted on 09/10/2019 2:56:50 PM PDT by PROCON
It depends on the design. Overpressure from a too-short chamber usually shows itself by popping primers out, or causing primers to "flatten" against the bolt face. If you've never noticed anything of the sort, you're probably in a safe operating pressure range for your rifle. A gunsmith would probably check the headspace and carefully examine the locking surfaces of the receiver and bolt for flattening and cracks (magnafluxing and such).
Thanks. I have been doing it for years but will experiment the next time I am at a range.
One other thing, if you want some peace of mind: The vendor I linked upthread (m-guns) also has a .223/5.56 chamber gage. Basically, you ink the outside of it with a sharpie, then stick it in the (clean) chamber until it stops, then rotate it a bit before observing how easy it is to remove. The snugness of the fit plus markings where the sharpie ink is scraped off should tell you whether the chamber is okay for mil-spec ammo. Most headspace gages usually run around $30, so his $50 price on this specialized tool isn’t out of line.
My concern is that there will be records of my purchases. I remember the promises of not keeping records of firearms purchases. You'd be a fool to think that records are not stored somewhere (especially electronically).
Guessing that it goes back to around 2000? So “they” will know who has them and who doesn't when the time comes (and which homes to send the police and national guard to).
I am deeply saddened by having to say this. But the Democrats are now very open about eliminating the 2nd Amendment and all private ownership of firearms. It is all justified by the mantra of saving lives. Liberal used to mean “libertarian” but now liberal Democrats want to establish authoritarian rule over us.
Also, it is reasonable to think that “people” are reading FR and noting our conversations. Everything we write here is completely visible to the rest of the world. So be cautious in what your write.
Anyway, that is why we must “defend the US Constitution” and this should be our rallying cry. Defending the US Constitution will give our cause righteous legitimacy. May God Bless America.
Disclaimer: Opinions posted on Free Republic are those of the individual posters and do not necessarily represent the opinion of Free Republic or its management. All materials posted herein are protected by copyright law and the exemption for fair use of copyrighted works.