Free Republic
Browse · Search
General/Chat
Topics · Post Article

Skip to comments.

Any sources for bulk .223/5.56?
1/23/2013 | Me

Posted on 01/23/2013 7:08:55 PM PST by Chasaway

With the craze for guns and ammo, are there any decent sources for bulk .223/5.56 ammo?

I'm good on .30-06 and 7.62. But I need to load up on stuff for the AR.

Ideas? Direction?


TOPICS: Hobbies
KEYWORDS: 2ndamendment; ammo; banglist; guns
Navigation: use the links below to view more comments.
first previous 1-2021-4041-55 last
To: Chasaway
Anyone have any experience with PMC X-Tac?

I've shot a lot of it in my AR, but not at that price!

41 posted on 01/23/2013 8:47:58 PM PST by backwoods-engineer ("Remember: Evil exists because good men don't kill the gov officials committing it." -- K. Hoffmann)
[ Post Reply | Private Reply | To 20 | View Replies]

To: Chasaway

Keep checking websites a few times a day. Also hang out at www.ar15.com and keep an eye open for ammo flags.


42 posted on 01/23/2013 8:56:50 PM PST by Dogbert41
[ Post Reply | Private Reply | To 1 | View Replies]

To: backwoods-engineer

What? Cheaper? Higher?

Is this likely a scam?

Bought them on gunbroker.com


43 posted on 01/23/2013 8:58:13 PM PST by Chasaway (Where are we going and why am I in this handbasket?)
[ Post Reply | Private Reply | To 41 | View Replies]

To: Chasaway

PMC is OK range ammo made in SKorea.
Nothing special, but at least the brass is reloadable.


44 posted on 01/23/2013 9:12:40 PM PST by mylife (The Roar Of The Masses Could Be Farts)
[ Post Reply | Private Reply | To 43 | View Replies]

To: mylife

I think some of my PMC stock came from South Africa, yes its decent brass, at least mine is.


45 posted on 01/23/2013 9:15:13 PM PST by Eye of Unk (AR2 2013 is the American Revolution part 2 of 2013)
[ Post Reply | Private Reply | To 44 | View Replies]

To: Eye of Unk

I don’t know where SA brass was produced.
The .308 stuff is OK


46 posted on 01/23/2013 9:26:10 PM PST by mylife (The Roar Of The Masses Could Be Farts)
[ Post Reply | Private Reply | To 45 | View Replies]

To: mylife

I have reloaded several thousand rounds of from the best I can recall about 4 years ago what was .223 PMC brass that was from SA, I picked up at a flea market about two 5 gallon buckets worth of it.


47 posted on 01/23/2013 9:33:53 PM PST by Eye of Unk (AR2 2013 is the American Revolution part 2 of 2013)
[ Post Reply | Private Reply | To 46 | View Replies]

To: Eye of Unk

Lots of different headstamps in different country’s from different years show different points of origin.

It is a collectable past time in itself to collect cartridges and source headstamps/contracts.


48 posted on 01/23/2013 9:39:21 PM PST by mylife (The Roar Of The Masses Could Be Farts)
[ Post Reply | Private Reply | To 47 | View Replies]

To: Chasaway
I know I'll get flamed to death, but IMHO, nuttin is going to happen. This comes up every few years and prices go through the roof. I don't think the Dems will even fall for this again. If Obummer tries to decree the Constitution null and void, I'm not so sure any generals would even take the order. Certainly he would have a breakdown in the chain down the line.

If America has any sense left at all, 2014 will remedy any problems and 2016 will fix the rest. I have a core set of guns and ammo I keep, but I sell my surplus on the market. At this moment, I only have 1 Mak 90 left I might sell. I will sell the stamped and keep the milled. I'm still mulling how many Mini-14's a man might need, but for now, I will just sell one more Mak 90 I paid $165 for 20 years ago. I stocked up back in the Waco days and have been selling at a profit for years now.

There are guns I will never sell, but to pay these prices now would be too painfull for me, guns or ammo.

49 posted on 01/24/2013 1:14:52 AM PST by chuckles
[ Post Reply | Private Reply | To 1 | View Replies]

sfl


50 posted on 01/24/2013 6:09:44 AM PST by phockthis (http://www.supremelaw.org/fedzone11/index.htm ...)
[ Post Reply | Private Reply | To 1 | View Replies]

To: phockthis

To All,

Learn to reload, I just made 2,000 rounds of 5.56 with military pull down projectiles with free brass I picked up off the ground from the range for $0.11 a round. Lots of folks leave their brass on the ground. That price only includes projectile, powder and ammo. Who are these suckers paying 50 cents to a dollar per round for 223 or 5.56 ammo?


51 posted on 01/24/2013 7:07:53 AM PST by XXXoholic
[ Post Reply | Private Reply | To 50 | View Replies]

To: XXXoholic

Ooops...projectile, powder and ammo was suppose to say projectile, powder and primers.


52 posted on 01/24/2013 7:10:23 AM PST by XXXoholic
[ Post Reply | Private Reply | To 51 | View Replies]

To: XXXoholic

I have been looking for reload supplies for a month now and most everything is sold out except for powder.


53 posted on 01/24/2013 7:50:09 AM PST by phockthis (http://www.supremelaw.org/fedzone11/index.htm ...)
[ Post Reply | Private Reply | To 51 | View Replies]

To: phockthis

They come back in stock in piecemeal, just got to set up notifications via email with the component suppliers. Try Midway, Powder Valley, Midsouth Shooters, Wideners, Natchez and Graph & Sons. Also try your local Cabela’s and Gander Mountain and ever you local gun shops. I stocked up before the craziness so i paid fair price but now, you may pay a premium but its still cheaper than buying factory ammo at these prices.


54 posted on 01/24/2013 8:27:47 AM PST by XXXoholic
[ Post Reply | Private Reply | To 53 | View Replies]

To: backwoods-engineer

I have 5.56x45 brass and 55 grain but can’t find primers anywhere that aren’t priced at 5x what they were mid December. Powder is a huge problem also...


55 posted on 01/25/2013 9:14:48 AM PST by El Laton Caliente (NRA Life Member & www.Gunsnet.net Moderator)
[ Post Reply | Private Reply | To 33 | View Replies]


Navigation: use the links below to view more comments.
first previous 1-2021-4041-55 last

Disclaimer: Opinions posted on Free Republic are those of the individual posters and do not necessarily represent the opinion of Free Republic or its management. All materials posted herein are protected by copyright law and the exemption for fair use of copyrighted works.

Free Republic
Browse · Search
General/Chat
Topics · Post Article

FreeRepublic, LLC, PO BOX 9771, FRESNO, CA 93794
FreeRepublic.com is powered by software copyright 2000-2008 John Robinson