Free Republic
Browse · Search
News/Activism
Topics · Post Article

Skip to comments.

Shooting victim bids on firm that made flawed gun
AP ^ | July 25, 2004 | AP

Posted on 08/12/2004 6:37:27 AM PDT by Former Military Chick

JACKSONVILLE, Fla. (AP) - A California teenager left paralyzed by an accidental shooting a decade ago placed a bid in federal bankruptcy court recently to buy the flawed handgun's manufacturer so he can shut it down.

Brandon Maxfield, 17, raised $175,000, much of it through his Web site, to buy bankrupt Bryco Arms of Costa Mesa, Calif. He wants to melt down 70,000 unassembled guns and close the company for good.

Bryco filed for bankruptcy in 2003 after a jury awarded the teenager $51 million in damages in a lawsuit.

Maxfield's bid to purchase Bryco was $25,000 more than the $150,000 accepted by U.S. Bankruptcy Court Judge Jerry Funk from Paul Jiminez, the company's former manager.

Ned Nashban, an attorney representing Bryco's owner, said the bidding process was over. But Richard Ruggieri, Maxfield's California attorney, disagreed, saying Funk could decide to sell to Maxfield since receiving the higher bid.

Bryco founder Bruce Jennings and his Nevada-based distribution company were ordered to pay $24 million of a $51 million judgment in Maxfield's lawsuit. Maxfield has received $8.7 million - none of it from Jennings or Bryco - from others named in the suit.

Days after the verdict, Jennings moved across the country to Florida, where he purchased a $500,000 annuity and a $900,000 home and hangar in Daytona Beach. He filed for personal bankruptcy and for bankruptcy for Bryco in Florida, where state law allows debtors to keep their houses.

Maxfield, a resident of Mendocino County north of San Francisco, was shot in 1994 by a baby sitter who was trying to unload a .380-caliber Bryco handgun. The shooting left him a quadriplegic. Because of the gun's design, its safety mechanism had to be released to unload the round in the semiautomatic's chamber.

Contact the Omaha World-Herald newsroom

Copyright ©2004 Omaha World-Herald®. All rights reserved. This material may not be published, broadcast, rewritten, displayed or distributed for any purpose without permission from the Omaha World-Herald.


TOPICS: News/Current Events
KEYWORDS: guncontrol; gunsafety; maxfield
Navigation: use the links below to view more comments.
first 1-2021-4041-54 next last
Brandon's Arms

If this story is to be believed, this might be the first time I agree with suing the gun folks. It sounds like they did not act responsibility and indeed hid the fact of the safety.

While I am a staunch advocate of the Right to Bare Arms, this young man seems to have a valid case and his moxy should be applauded.

Dave and I discussed this, and if the facts as presented are true, it sounds like a defective gun.

This is of course my point of view. If there is more on this subject I would love to know more. The link below takes you to his site.

Frankly I would be interested in a discussion of this article if anyone is interested. Companies like this give those who are honest a bad name and a platform to scare.

1 posted on 08/12/2004 6:37:28 AM PDT by Former Military Chick
[ Post Reply | Private Reply | View Replies]

To: Former Military Chick
Heck, anyone that closes down Bryco is doing the gun industry a favor. A worse firearm you could not find.

Well, except maybe Jennings.

2 posted on 08/12/2004 6:38:56 AM PDT by Lazamataz ("Stay well - Stay safe - Stay armed - Yorktown" -- harpseal)
[ Post Reply | Private Reply | To 1 | View Replies]

To: Former Military Chick
While I am a staunch advocate of the Right to Bare Arms,

I prefer long sleeves myself but, to each his own. :=)

3 posted on 08/12/2004 6:40:05 AM PDT by Bob (Sorry, I just couldn't help myself.)
[ Post Reply | Private Reply | To 1 | View Replies]

To: Former Military Chick
When he was seven, Brandon Maxfield was accidentally shot in the face when a Bryco pistol discharged while being unloaded. As a result, Brandon is permanently paralyzed below the neck. In Maxfield v Bryco, a unanimous jury found Bryco Arms responsible for its defective design and for Brandon Maxfield’s injuries and medical expenses.

1. Always treat a gun like it is loaded

2. Always point a gun in a safe direction

3. Never point a gun at a person

Yep - Sounds like the gun's fault...

4 posted on 08/12/2004 6:41:21 AM PDT by 2banana (They want to die for Islam and we want to kill them)
[ Post Reply | Private Reply | To 1 | View Replies]

To: Bob
...bare arms...

I think that means open carry

5 posted on 08/12/2004 6:43:36 AM PDT by 2oakes (US citizen, ex-brit, and VERY glad of it)
[ Post Reply | Private Reply | To 3 | View Replies]

To: Former Military Chick

You can't get a round out of the chamber of a 1911, which is one of the most popular handguns of all time, without taking the safety off.

No firearm can make an operator follow the two most basic rules of firearm safety:

Always point the muzzle in a safe direection.

Always keep your finger off the trigger until you are ready to shoot.

P.S. Some people shouldn't "bare" their arms in public.


6 posted on 08/12/2004 6:44:13 AM PDT by DrNo
[ Post Reply | Private Reply | To 1 | View Replies]

To: Former Military Chick; All
Maxfield, a resident of Mendocino County north of San Francisco, was shot in 1994 by a baby sitter who was trying to unload a .380-caliber Bryco handgun. The shooting left him a quadriplegic. Because of the gun's design, its safety mechanism had to be released to unload the round in the semiautomatic's chamber.

WTF??? Can anyone identify for me any semiauto pistol which can be cleared while the "safety" is engaged? Jennings may have been crap pistols, but the baby sitter was clearly violating Rule 2, and probably Rule 3 as well.

7 posted on 08/12/2004 6:45:12 AM PDT by ArrogantBustard (Western Civilisation is aborting, buggering, and contracepting itself out of existence.)
[ Post Reply | Private Reply | To 1 | View Replies]

To: Lazamataz
Heck, anyone that closes down Bryco is doing the gun industry a favor. A worse firearm you could not find.

That Bryco, Jennings, etc has survived for so long sends a message, that poor people also have a right to bear arms.

Would I own one? Never, they're junk, but junk lawsuits helps to drive up the price of better guns.

I heard the other day that the Durham County Sheriffs office is pressuring local gun stores to not sell the High Standard handguns, too much gun for too little money. If High Standard .45s are showing up in the hands of gangbangers, whose fault is that? Who is prosecuting the straw buyers?

When will minorities and the poor wake up and realize that the Dems are slowly stripping them of their rights?

8 posted on 08/12/2004 6:51:18 AM PDT by TC Rider (The United States Constitution © 1791. All Rights Reserved.)
[ Post Reply | Private Reply | To 2 | View Replies]

To: TC Rider
I'd be for the government giving surplus military firearms to the poor, instead of that crappy welfare cheese.

That welfare cheese could KILL someone.

9 posted on 08/12/2004 6:53:08 AM PDT by Lazamataz ("Stay well - Stay safe - Stay armed - Yorktown" -- harpseal)
[ Post Reply | Private Reply | To 8 | View Replies]

To: 2banana

Laz's Gun Safety Rules:

1. Don't sweat whether you unloaded your gun earlier. It's probably unloaded. So don't be such a worrywart!

2. It's fun to scare your friends by pointing your unloaded firearm at them. Watch their eyes get big!

3. Guns look a lot like toy guns. Toys are fun. Screw around a little! Life is short, have a little horseplay with your guns! Play cowboys and indians!

4. There is nothing a gun can harm that you can't fix up just as good as new later.


10 posted on 08/12/2004 6:57:11 AM PDT by Lazamataz ("Stay well - Stay safe - Stay armed - Yorktown" -- harpseal)
[ Post Reply | Private Reply | To 4 | View Replies]

To: Lazamataz

I have owned several Jennings pistols. They are reliable and unusually accurate. They are made of pot metal but otherwise a decent inexpensive gun.


11 posted on 08/12/2004 6:58:22 AM PDT by yarddog
[ Post Reply | Private Reply | To 2 | View Replies]

To: ArrogantBustard
Can anyone identify for me any semiauto pistol which can be cleared while the "safety" is engaged?

Sure, four of them that I own: Beretta 92, Heckler & Koch P7M8, Walther PPK/s, and Glock 29 handguns can all be cleared without disengaging the mechanical safety.

12 posted on 08/12/2004 7:01:42 AM PDT by Chemist_Geek ("Drill, R&D, and conserve" should be our watchwords! Energy independence for America!)
[ Post Reply | Private Reply | To 7 | View Replies]

To: yarddog
I have owned several Jennings pistols. They are reliable and unusually accurate. They are made of pot metal but otherwise a decent inexpensive gun.

I've heard the opposite from others.

13 posted on 08/12/2004 7:03:25 AM PDT by Lazamataz ("Stay well - Stay safe - Stay armed - Yorktown" -- harpseal)
[ Post Reply | Private Reply | To 11 | View Replies]

To: 2banana

NEVER let the muzzle cover anything you dont intend to destroy.....


14 posted on 08/12/2004 7:04:08 AM PDT by joesnuffy (Moderate Islam Is For Dilettantes)
[ Post Reply | Private Reply | To 4 | View Replies]

To: ArrogantBustard
WTF??? Can anyone identify for me any semiauto pistol which can be cleared while the "safety" is engaged? Jennings may have been crap pistols, but the baby sitter was clearly violating Rule 2, and probably Rule 3 as well.

Glock.

15 posted on 08/12/2004 7:04:25 AM PDT by FateAmenableToChange
[ Post Reply | Private Reply | To 7 | View Replies]

To: Lazamataz
There is a lot of snobbery among shooters. I am sometimes guilty of it myself. Just to illustrate that I will mention that I also own two High Standard Victors, A Browing Challenger, (the original one not the newer cheap ones) plus maybe a dozen other high end .22's.

At one time I owned over 200 mostly high end handguns, although I was forced to sell quite a few while in grad school.

The Jennings has a good rep among knowledgeable shooters as does the raven, another cheapie made by the same family.

16 posted on 08/12/2004 7:10:44 AM PDT by yarddog
[ Post Reply | Private Reply | To 13 | View Replies]

To: FateAmenableToChange; Chemist_Geek
Point of order: Glocks don't have a mechanical safety. IIRC, the H&K doesn't either.

If you own a Beretta I'll defer to your knowledge, as I do not. I had thought the safety locked the slide.

On the M1911 (and all its cousins), Browning Hi-Power, Ruger MkI/II the safetly also locks the slide.

17 posted on 08/12/2004 7:10:46 AM PDT by ArrogantBustard (Western Civilisation is aborting, buggering, and contracepting itself out of existence.)
[ Post Reply | Private Reply | To 15 | View Replies]

To: 2banana

No bias in this article is there? (/sarcasm)


18 posted on 08/12/2004 7:11:04 AM PDT by Dead Corpse (For an Evil Super Genius, you aren't too bright are you?)
[ Post Reply | Private Reply | To 4 | View Replies]

To: ArrogantBustard

On a Baretta/Taurus 92, you can pop the mag with the safety engaged. Ain't no way in hell to clear the chamber without first disengaging the safety. It's a slide stop that flips up.


19 posted on 08/12/2004 7:15:51 AM PDT by Dead Corpse (For an Evil Super Genius, you aren't too bright are you?)
[ Post Reply | Private Reply | To 17 | View Replies]

To: Dead Corpse
Ain't no way in hell to clear the chamber without first disengaging the safety.

What are you talking about? The safety on my 92 has nothing to do with the slide motion. I can open the chamber whether or not the safety is engaged.

20 posted on 08/12/2004 7:23:30 AM PDT by Chemist_Geek ("Drill, R&D, and conserve" should be our watchwords! Energy independence for America!)
[ Post Reply | Private Reply | To 19 | View Replies]


Navigation: use the links below to view more comments.
first 1-2021-4041-54 next last

Disclaimer: Opinions posted on Free Republic are those of the individual posters and do not necessarily represent the opinion of Free Republic or its management. All materials posted herein are protected by copyright law and the exemption for fair use of copyrighted works.

Free Republic
Browse · Search
News/Activism
Topics · Post Article

FreeRepublic, LLC, PO BOX 9771, FRESNO, CA 93794
FreeRepublic.com is powered by software copyright 2000-2008 John Robinson