Gun Talk Radio 1/12/14

Gun Talk Radio ^ | 1/12/14 | Tom Gresham

[mylife]

~~Come on in and shoot the breeze~~

Gun Talk Radio

1/12/14~~07:00 CST

Listen to the podcast Here
Or the KIDO 580 stream Here

Or the KPRC feed Here

[mylife]

I have seen those.

Spiffy idea.

[smokingfrog]

Lawmakers plot new strategy for defying gun laws

[Clint N. Suhks]

Holy crap!

You can buy an AR lower receiver without a FFL? Who is this?

[mylife]

It is my understanding that .380 and 9mm are made on the same machine lines.

.380 goes up in price when the demand for 9mm goes up.

They make a lot of cheap 9mm to satisfy the market and no .380 gets made so its price goes up.

[alfa6]

I was guessing that was what you used, the cuts look very straight.

Darn it now you have given me another project!

Right after I get the first 100 or so done :-)

Regards

alfa6 ;>}

[RandallFlagg]

John Lott’s reply was telling me that the data won’t be likely released until October this year. And that it would be in a format that wouldn’t be of much use for my project.

AKK!!
He just replied to my reply from his iPhone.

I’ll be back...again.
(This guy keeps some weird hours)
;-)

[mylife]

80% lower

[RandallFlagg]

It’s a Hi-Point carbine. Not an AR.

[Clint N. Suhks]

I don’t have a drill press.

[davetex]

OH, that’s one of those tacticle bulbs with the muzzle relief cut into it. Magpul or 511?

[mylife]

It is legal to build your own receiver but you may not sell it or transfer it.

There is the rub.

That is my understanding.
Gun laws just suck.

[smokingfrog]

It’s not completed. You have to drill some holes and stuff to finish it.

[mylife]

It's hard to build guns without tools ☺

[Clint N. Suhks]

https://hlfmanufacturing.com

[Professional Engineer]

(Would rather have a 7.62x39 but upper components seem to be almost non-existent so 300 Blackout in the next obvious choice.)

I thought the same thing. I also wondered about future ammo availability if the cheap commie stuff can't be imported.

[mylife]

I am loving the HLF commercial. ☺

[davetex]

Here ya go Clint, check this out.

http://polymer80.com/

[Professional Engineer]

I was guessing that was what you used, the cuts look very straight.

I did it freehand, using my calibrated eyeballs. Being in construction is good for something. lol

Darn it now you have given me another project!

Glad I could help.

[mylife]

Speaking of receivers, this is kind of a deal.

http://centerfiresystems.com/rifle-vz58hc-fold.aspx

This is fully $100 below the cost of a crappy Romanian stamped sheet metal AK and this VZ is a milled receiver.

Milled brother. I would charge you $200 to make the receiver.

[Clint N. Suhks]

Booked, Thanks!