Posted on 04/16/2014 4:53:49 PM PDT by thackney
One of the criticisms levied against hydraulic fracturing, particularly during recent periods of drought, is the amount of water used in the process. However, energy companies are seeking to reduce water use during hydraulic fracturing, even as research shows more water is used in other activities.
The numbers put things into perspective. The amount of water used to frack a well varies, but most reporting entities put the figure in a range of about 3 to 6 million gallons of water. In Pennsylvania, the average amount of water per well is about 4.4 million gallons, according to State Impact Pennsylvania, a reporting project of National Public Radio (NPR). Using a range of 3-5 million gallons of water per well in the Marcellus Shale, the State College Borough Water Authority calculated that about 12-20 million gallons of water were used in the formation each day.
In Texas, the estimated average is similar; about 4.5 million gallons of water is used to fracture a well in the Eagle Ford Shale formation, according to the San Antonio Express News. Over an 18-month period, 19.2 billion gallons of water were used in the Eagle Ford formation, according to Ceres, a non-profit organization advocating sustainability.
All that comes out to between 70 billion and 140 billion gallons of water that are used to frack 35,000 wells a year, according to a 2011 report by the Environmental Protection Agency (EPA).
While that is not an insignificant amount of water, it is actually quite modest when compared with other common uses of water. Far more water is used for municipalities, manufacturing and agriculture, according to FracFocus.
The total estimated water consumption for all shale wells completed in 2011 was .3 percent of total U.S. freshwater consumption, according to Jesse Jenkins, a Massachusetts Institute of Technology researcher for The Energy Collective, in a report. That was well under the water usage at golf courses, which accounts for .5 percent of all the freshwater consumption in the country, according to the Professional Golf Association. In Texas, where fracking has been the most prevalent, the amount of water used by the oil and gas industry is still less than 1 percent of the state’s overall water use, according to the Texas State Water Board.
Another way for Texas homeowners to look at the water issue is to consider that in a given year, watering Texas lawns uses 18 times the amount of water that was used in fracking in the state in 2011, Rusty Todd, University of Texas professor, told the Wall Street Journal. And watering golf courses and lawns uses far less water than agriculture, which uses 243 times more water than fracking does, Jenkins noted.
Other uses consume much more water than fracking. Thermoelectric generation, including coal, natural gas and nuclear technologies, use heat to make steam. They account for 40 percent of freshwater withdrawals in the United States, according to Time.
Most often, large shale reservoirs are found in arid or semi-arid areas, where water is scarce. Many of the areas where the droughts are occurring are, and have always been, naturally dry areas prone to periodic droughts, Forbes Magazine contributor David Blackmon noted. In parts of South and West Texas, for example, cyclical droughts are nothing new. However, with virtually all of Texas having been in a five-year drought, any large-scale use of water will exacerbate the tight water supply situation.
Since 2011, nearly three-quarters of the nearly 40,000 oil and gas wells that have been drilled in the United States have been in arid or semi-arid areas, and in California, about 96 percent of oil and gas wells are located in areas where a drought emergency was recently called, according to the Ceres investor network. In areas where water is in short supply, a fracking pad makes a highly visible target.
However, the perception of oil and gas companies doing hydraulic fracturing in dry areas may be worse than what is going on in reality. In parts of Texas, for example, much of the water used in fracking is not taken from shallow reservoirs that may be used to supply drinking and agriculture water. Instead, the water used by energy companies in the fracking process is often taken from deeper wells that typically contain water that is too brackish to be suitable for drinking or agricultural use, Blackmon said.
Perceptions are hard to overcome, but the oil and gas industry has been active in looking for and developing alternatives. These alternatives will become increasingly important if, as expected, some areas of the country are subjected to more frequent droughts.
More fracking water is now being recycled than at any time in the past, and conservation efforts have been stepped up, according to Blackmon.
In Louisiana, for example, some drilling companies where the Haynesville Shale is located have begun purchasing effluent water that had been treated by the City of Shreveport, or are also using treated wastewater from a nearby paper mill. Some companies in the Eagle Ford, noting the success that the drilling companies next door in Louisiana have had, are now using effluent water, as well.
Major energy companies have been active in other ways to help lessen the water problem. Thanks to new water systems and technologies designed by Halliburton Company, FTS Energy International, Baker Hughes, Dow Chemical Co., OriginOil Inc. and others, drilling companies can formulate fracking water that is made with less or no fresh water, or that cleans up fracking water that can be reused.
There is no shortage of water in Western Pa where the all the wells are being drilled.
Aren’t they building a big water pipeline from the Ohio River?
http://online.wsj.com/news/articles/SB10001424127887323420604578652594214383364
For those who want to see a video showing how horizontal drilling and fracking is done, Northern Gas and Oil has a great one. It’s 6 minutes.
It includes a visual piece on how fresh water aquifers are protected from contamination.
http://www.northernoil.com/drilling-video
First I heard about that, but I do know local water authorities have no problem selling water to drilling operations. They have plenty of water to sell.
All of the wells in question are deep enough to pass through salt water zones...and you can use salt water to frac.
Problem solved.
Next.
Yep, that is becoming more common, just like the article said. But I don’t believe they source it from the same well they are going to hydro frac.
- - - -
Instead, the water used by energy companies in the fracking process is often taken from deeper wells that typically contain water that is too brackish to be suitable for drinking or agricultural use, Blackmon said.
Disclaimer: Opinions posted on Free Republic are those of the individual posters and do not necessarily represent the opinion of Free Republic or its management. All materials posted herein are protected by copyright law and the exemption for fair use of copyrighted works.