Free Republic
Browse · Search
News/Activism
Topics · Post Article

Skip to comments.

It's Unique - But Can It Pop A Wheelie?.....
www.motorcyclemojo.com ^ | 04/25/2008 | Glen Roberts

Posted on 05/01/2008 6:17:49 AM PDT by Red Badger

The 2008 National Motorcycle Show in Toronto has always been heavily influenced by the American V-twin crowd and highlights some of the area's top custom builders who have on display a fine array of one-off custom machines.

This year's show, however, had one very unusual one-off custom, the Uno. The orange and grey coloured Uno made its first public appearance balanced on its two side-by-side wheels and its footpegs. Looking more like it should have been ridden by George Jetson as he pulled up to his space platform, it looked out of place amid the other custom creations in the building. Perhaps that's why it garnered so much attention. Since no one has ever seen a machine like this, the first question asked by on-lookers was:

"What is it?"

Ultra Modern Meets Ultra Custom

The Uno (www.the-uno-tomorrows-transportation.com) and its inventor, 18-year-old Ben J. Poss Gulak, hung out in a booth neighbouring the show's special guest, Russell Mitchell of Exile Cycles and was the ultimate in contrast of custom creations. In fact, heavily tattooed Mitchell was seen riding the Uno around the show on Saturday evening. Ben, as you would expect, fielded a multitude of questions about his strange vehicle once people got over his young age. As Ben will tell you, the most common question was, "What's your background, how did you get into doing something like this?" A worthy question, and also my first question to Ben.

Ben grew up around his grand-father's basement machine shop. While he doesn't have any formal training, yet, Ben has spent much of his life making projects like 'model trains, rockets and other cool stuff.'

The education he gleaned from his grandfather, who was an engineer, and from simply being a tinkerer prompted Ben to enter into a grade nine school science fair with a 'real simple magnetic car that shot around a track using accelerator coils.' This is where I started to worry that this guy is going to start speaking a language that is way over my head. He must have noticed my eyes starting to glaze over and came back to earth for me. He did well at the grade nine science fair, and as a result, he was chosen to move up to the Regionals, then to the Nationals. He was then chosen to represent Canada at an International level.

"Team Canada consists of 18 people that compete against 54 other countries. The judges at this level all carry PHD's in their respective fields," Ben said. The 18-year-old continued, "There were astronauts and Nobel laureates speaking to the kids in attendance. It was a real eye opener, and after the competition I realized I really wanted to get into engineering."

About a month after the competition, Ben's grandfather passed away and his machine shop was willed to Ben. He continued to compete in science fairs with progressively more complicated projects thanks to the increased knowledge he gained as every year of high school passed.

A 2006 trip to China prompted Ben to consider a project in electric transportation after seeing the damage done by the internal combustion engine. "The smog was so thick, we never saw the sun," Ben said. He then realized that some form of electric transport was desperately needed in the same compact form as a motorcycle or bicycle to help ease congestion and save the environment.

Since Ben had competed at the International level of the science fair before, he was able to apply to Team Canada directly without going through the Regional and National levels of competition. It was this competition that he submitted his first Uno. A simple frame made from angle iron and mountain bike wheels, which were of course powered by electric motors.

The First Public Viewing

The Uno model you see here, Ben's third prototype, was unveiled at the National Show. After many hand drawn sketches and complex drawings, he began the machining work of building the basic drive/suspension assembly. He didn't know CAD software, but instead used the free Google software called Google SketchUp. Ironically, a salesman came knocking shortly after, trying to sell SolidWorks, a 3-D CAD software package. Ben explained he couldn't afford anything like that, but he did show the salesman what he was working on. The next day a copy of SolidWorks and a SolidWorks for Dummies book arrived, (smart salesman, he probably has a customer for life now).

Sometimes You Need a Little Help

While Ben did all the work to get the Uno this far, he was in need of some help. He needed tires mounted on his custom-made wheels and had heard of Motorcycle Enhancements in Oakville (www.motorcycleenhancements.com), Ontario. Ben called and spoke with owner, John Cosentini. It must have been fate as this was a call that would have a major impact on the finishing touches of the Uno. Cosentini, a well-known figure in the Oakville motorcycle scene, and an accomplished custom bike builder, mounted the tires and since he has an inquiring mind, he began asking a few questions. Ben sensed the curiosity and a couple of days later brought in his project. This time, with questions of his own for John. Ben needed a frame to complete the skeletal structure of the Uno and John suggested a Yamaha R1 frame because of its width between frame spars, a requirement needed to hold the drive/suspension portion of the Uno.

Ben also needed a body to wrap around the framework. Cosentini, a mechanic and never being one to turn down a challenge, took on the project. John and Ben began by making a simple frame which they could mount Styrofoam onto. They carved the Styrofoam into the general shape they were looking for and then began to apply drywall compound over top of the styrofoam. The drywall mud was used for a couple of reasons; if fiberglass was applied directly to the styrofoam, it would chemically melt it; also, the drywall mud could then be fine tuned by building up and sanding for the final shape. Latex primer and paint was applied to create a smooth surface and the latex would also allow for easier removal of the fiberglass from the mold.

The molding took six weeks to complete and only two hours to destroy once the fiberglass was set.

The body was then cut in half and sent to Roger Pouw at Extreme Measures Kustom Paint (www.extrememeasures.ca) for final bodywork and paint.

Ben was now well on his way to having a physical entity, but had a lot of fine-tuning to do on the computer side of things. He had programmed the software to understand what the digital gyros were feeding into the ECU (electronic control unit) but couldn't quite get it right, after all, it's a pretty grey area. Soon he was on a plane to meet Trevor Blackwell in California. Blackwell is a robotics and gyro expert. After a couple of visits to Blackwell, Ben had the Uno in full operation mode. Ben claims a single gyro was easy to program, but this project was more complicated because the Uno has two gyros, one for forward and backward motion and the other is for turning, while keeping the forward or reverse momentum constant.

The Operation of the Uno

Operation of the 54.4 kg (120 lb) machine is simple, in fact it's so simple there are no controls except for an on-off switch. To go forward you simply push your body weight forward to tilt the machine. To back up, just lean back on the seat to tilt it backwards and back it goes. The farther you lean, the faster it accelerates. The gyro tells the ECU how much to accelerate and that in turn delivers the proper amount of current to the electric motors, one for each wheel.

... MMM


TOPICS: Culture/Society; Miscellaneous; News/Current Events
KEYWORDS: motorcycle; unicycle; uno
Navigation: use the links below to view more comments.
first 1-2021-39 next last

1 posted on 05/01/2008 6:17:49 AM PDT by Red Badger
[ Post Reply | Private Reply | View Replies]

To: Red Badger

An “UNO” with two wheels????


2 posted on 05/01/2008 6:19:11 AM PDT by Don Corleone (Leave the gun..take the cannoli)
[ Post Reply | Private Reply | To 1 | View Replies]

To: Red Badger

Pretty cool. I’m sure I’d kill myself on one, but still...pretty cool! :)


3 posted on 05/01/2008 6:19:37 AM PDT by Diana in Wisconsin (Save The Earth. It's The Only Planet With Chocolate.)
[ Post Reply | Private Reply | To 1 | View Replies]

To: Red Badger

Yeah that looks safe. lol


4 posted on 05/01/2008 6:19:43 AM PDT by Slapshot68
[ Post Reply | Private Reply | To 1 | View Replies]

To: Don Corleone

One axle......


5 posted on 05/01/2008 6:20:43 AM PDT by Red Badger ( We don't have science, but we do have consensus.......)
[ Post Reply | Private Reply | To 2 | View Replies]

To: Red Badger
Glad they scrapped the original name, The Gaycycle.
6 posted on 05/01/2008 6:21:24 AM PDT by Sax
[ Post Reply | Private Reply | To 1 | View Replies]

To: Diana in Wisconsin

Evil Knievel would be proud.......


7 posted on 05/01/2008 6:21:42 AM PDT by Red Badger ( We don't have science, but we do have consensus.......)
[ Post Reply | Private Reply | To 3 | View Replies]

To: Red Badger

This will be a boon to the organ transplant industry.


8 posted on 05/01/2008 6:22:20 AM PDT by Joe 6-pack (Que me amat, amet et canem meum)
[ Post Reply | Private Reply | To 1 | View Replies]

To: martin_fierro

um.....UNO Ping???


9 posted on 05/01/2008 6:22:22 AM PDT by Jersey Republican Biker Chick (Some days it is not worth chewing through the restraints.)
[ Post Reply | Private Reply | To 1 | View Replies]

To: Red Badger

Looks a little better than electric scooters, if given the choice between, I would go with the former. For the open country though, nothing beats a touring bike.


10 posted on 05/01/2008 6:23:46 AM PDT by Xenophon450 (I guess I'll never know, some things under the sun can never be understood...)
[ Post Reply | Private Reply | To 1 | View Replies]

To: Red Badger

Cool idea, and a seriously smart kid. But one has to wonder whether or not the Segway folks will get after him for patents.


11 posted on 05/01/2008 6:24:38 AM PDT by r9etb
[ Post Reply | Private Reply | To 1 | View Replies]

To: Red Badger
“Well, son, in my younger days I was pretty wild. Ya see this scar running down my leg here? That's my Uno memento."
12 posted on 05/01/2008 6:25:34 AM PDT by ClearCase_guy
[ Post Reply | Private Reply | To 1 | View Replies]

To: Xenophon450
Looks a little better than electric scooters, if given the choice between, I would go with the Uno. Assuming it has superior mileage and efficiency and can accelerate past 30mph. Need more coffee.
13 posted on 05/01/2008 6:25:36 AM PDT by Xenophon450 (I guess I'll never know, some things under the sun can never be understood...)
[ Post Reply | Private Reply | To 10 | View Replies]

To: Red Badger

This is what the Segway wishes it was ...


14 posted on 05/01/2008 6:26:09 AM PDT by ArrogantBustard (Western Civilization is Aborting, Buggering, and Contracepting itself out of existence.)
[ Post Reply | Private Reply | To 1 | View Replies]

To: Xenophon450
For the open country though, nothing beats a touring bike.

The Honda Goldwing has nothing to fear from Uno.......

15 posted on 05/01/2008 6:31:46 AM PDT by Red Badger ( We don't have science, but we do have consensus.......)
[ Post Reply | Private Reply | To 10 | View Replies]

To: r9etb

They might, but not until he makes some “for profit”. Suing someone who has no money is kind of pointless.......


16 posted on 05/01/2008 6:32:58 AM PDT by Red Badger ( We don't have science, but we do have consensus.......)
[ Post Reply | Private Reply | To 11 | View Replies]

To: Red Badger
Operation of the 54.4 kg (120 lb) machine is simple, in fact it's so simple there are no controls except for an on-off switch. To go forward you simply push your body weight forward to tilt the machine. To back up, just lean back on the seat to tilt it backwards and back it goes. The farther you lean, the faster it accelerates. The gyro tells the ECU how much to accelerate and that in turn delivers the proper amount of current to the electric motors, one for each wheel.

so basically it's a Segway with a seat. ... MMM

17 posted on 05/01/2008 6:33:49 AM PDT by pgkdan (Tolerance is the virtue of the man without convictions - G.K. Chesterton)
[ Post Reply | Private Reply | To 1 | View Replies]

To: Joe 6-pack

I dunno, the organs would be all mushed up!................


18 posted on 05/01/2008 6:34:39 AM PDT by Red Badger ( We don't have science, but we do have consensus.......)
[ Post Reply | Private Reply | To 8 | View Replies]

To: pgkdan
..it's a Segway with a seat.

It's a Segway with a pimp job!...........

19 posted on 05/01/2008 6:36:48 AM PDT by Red Badger ( We don't have science, but we do have consensus.......)
[ Post Reply | Private Reply | To 17 | View Replies]

To: Sax
Glad they scrapped the original name, The Gaycycle.

Heh heh heh!

20 posted on 05/01/2008 6:39:05 AM PDT by Hemingway's Ghost (Spirit of '75)
[ Post Reply | Private Reply | To 6 | View Replies]


Navigation: use the links below to view more comments.
first 1-2021-39 next last

Disclaimer: Opinions posted on Free Republic are those of the individual posters and do not necessarily represent the opinion of Free Republic or its management. All materials posted herein are protected by copyright law and the exemption for fair use of copyrighted works.

Free Republic
Browse · Search
News/Activism
Topics · Post Article

FreeRepublic, LLC, PO BOX 9771, FRESNO, CA 93794
FreeRepublic.com is powered by software copyright 2000-2008 John Robinson