Posted on 07/31/2018 4:31:35 PM PDT by PROCON
Winchester Model 59 shotgun, circa 1960:
The Winchester Model 59 features technological advancements and innovations never seen before when it was released in 1960. A six-pound twelve gauge semi-automatic that is reliable and easy to clean proved it to be ahead of its time. There are no gas valves, inertia systems or complex mechanisms that make this gun function. A super-simple floating breach is the heart of the gun.
The floating breach consists of the chamber and forcing cone, however it is a separate piece from the barrel. Upon firing, the floating breach acts like a short piston and moves to the rear about 1/10 of an inch. That slight movement sets the bolt into rearward travel under its own momentum. A return spring pushes the bolt forward again where it picks up and feeds another cartridge.
The innovation does not stop there. The barrel is ultra light-weight. It is a metal tube that is wrapped in over 500 miles of fiber thread that fused and bonded. This process is similar to the carbon-fiber barrels that are increasingly popular on rifles.
It might also be possible to use a ceramic/glass composite inner *base tube* rather than metal. Composites and ceramics have come a mighty long way since 1960. Remember that early muzzleloading rifles used Damascus barrels made by forge-welding three bars of metal radially around a mandrel.
I recall reading somewhere the Army and Navy were interested in the concept of ceramic barrels for the big guns, 20mm and up.
I couldn't find any recent info on how the research was progressing but here's a couple of links on the subject:
APPROACHES FOR THE DESIGN OF CERAMIC GUN BARRELS
Advanced Ceramic Gun Barrel Materials & Processing Methods--Phase II
Eventually we'll see an exotic ceramic barrel, just a matter of time.
An aluminum barrel has been successfully used on at least one firearm: The Armalite AR-17 Shotgun
The Army and Navy are interested in ceramic barrels:
APPROACHES FOR THE DESIGN OF CERAMIC GUN BARRELS
Advanced Ceramic Gun Barrel Materials & Processing Methods--Phase II
Eventually we'll see an exotic ceramic barrel, just a matter of time.
1897 Mosey here. $100
Then yours is 121 years old, not 111. Good on you for having a “non-gun” like that.
Math aint my strong point :)
But you got my point.
PEOPLE: Just to to www.CodeIsfreeSpeech.com and download for FREE all 10 3D-printer gun blueprints! I did, and I have no such printer! It took about one minute to get them all. Support our First Amendment against Judicial and Fakebook censorship!
Well done.
Also a good idea to post that on any youtube or twitter page where there are stories about Venezuelans or Iranians opposing their dictatorships. Especially the one shot Liberator pistol plans.
“Well done. Also a good idea to post that on any youtube or twitter page where there are stories about Venezuelans or Iranians opposing their dictatorships. Especially the one shot Liberator pistol plans.”
Please do post it there, if you can. I have TRIED to post it, but it is erased within minutes!
I didn’’t realize they were being erased. Will now bookmark when I post them and go back and check.
Thans for the heads up.
PS - I tweeted to Secy of State Pompeo they should push that... guess I’m on some list now...( : >)
“I didn’’t realize they were being erased. Will now bookmark when I post them and go back and check.”
Please do repost links to www.CodeIsFreeSpeech.com all over the internet, if you can. Help to fight FAKEBOOK, Twitter, Spotify, and Google CENSORSHIP!
Bump.
Disclaimer: Opinions posted on Free Republic are those of the individual posters and do not necessarily represent the opinion of Free Republic or its management. All materials posted herein are protected by copyright law and the exemption for fair use of copyrighted works.