Posted on 02/17/2022 3:40:02 AM PST by LibWhacker
An artist's conception of the Starshot Lightsail spacecraft during acceleration by a ground-based laser array. Previous conceptions
of lightsails have imagined them being passively pushed by light from the sun, but Starshot's laser-based approach requires rethinking
the sail's shape and composition so it won't melt or tear during acceleration.
Astronomers have been waiting decades for the launch of the James Webb Space Telescope, which promises to peer farther into space than ever before. But if humans want to actually reach our nearest stellar neighbor, they will need to wait quite a bit longer: a probe sent to Alpha Centauri with a rocket would need roughly 80,000 years to make the trip.
Igor Bargatin, Associate Professor in the Department of Mechanical Engineering and Applied Mechanics, is trying to solve this futuristic problem with ideas taken from one of humanity's oldest transportation technologies: the sail.
As part of the Breakthrough Starshot Initiative, he and his colleagues are designing the size, shape and materials for a sail pushed not by wind, but by light.
Using nanoscopically thin materials and an array of powerful lasers, such a sail could carry a microchip-sized probe at a fifth of the speed of light, fast enough to make the trip to Alpha Centauri in roughly 20 years, rather than millennia.
"Reaching another star within our lifetimes is going to require relativistic speed, or something approaching the speed of light," Bargatin says. "The idea of a light sail has been around for some time, but we're just now figuring out how to make sure those designs survive the trip."
Much of the earlier research in the field has presumed that the sun would passively provide all of the energy that light sails would need to get moving. However, Starshot's plan to get its sails to relativistic speeds requires a much more focused source of energy. Once the sail is in orbit, a massive array of ground-based lasers would train their beams on it, providing a light intensity millions of times greater than the sun's.
Given that the lasers' target would be a three-meter-wide structure a thousand times thinner than a sheet of paper, figuring out how to prevent the sail from tearing or melting is a major design challenge.
Bargatin, Deep Jariwala, Assistant Professor in the Department of Electrical and Systems Engineering, and Aaswath Raman, Assistant Professor in the Department of Materials Science and Engineering at the UCLA Samueli School of Engineering, have now published a pair of papers in the journal Nano Letters that outline some of those fundamental specifications.
One paper, led by Bargatin, demonstrates that Starshot's light sails—proposed to be constructed out of ultrathin sheets of aluminum oxide and molybdenum disulfide—will need to billow like a parachute rather than remain flat, as much of the previous research assumed.
"The intuition here is that a very tight sail, whether it's on a sailboat or in space, is much more prone to tears," Bargatin says. "It's a relatively easy concept to grasp, but we needed to do some very complex math to actually show how these materials would behave at this scale."
Rather than a flat sheet, Bargatin and his colleagues suggest that a curved structure, roughly as deep as it is wide, would be most able to withstand the strain of the sail's hyper-acceleration, a pull thousands of times that of Earth's gravity.
"Laser photons will fill the sail much like air inflates a beach ball," says Matthew Campbell, a postdoctoral researcher in Bargatin's group and lead author on the first paper. "And we know that lightweight, pressurized containers should be spherical or cylindrical to avoid tears and cracks. Think of propane tanks or even fuel tanks on rockets."
The other paper, led by Raman, provides insights into how nanoscale patterning within the sail could most efficiently dissipate the heat that comes along with a laser beam a million times more powerful than the sun.
"If the sails absorb even a tiny fraction of the incident laser light, they'll heat up to very high temperatures," Raman explained. "To make sure they don't just disintegrate, we need to maximize their ability to radiate their heat away, which is the only mode of heat transfer available in space."
Earlier light-sail research showed that using a photonic crystal design, essentially studding the sail's "fabric" with regularly spaced holes, would maximize the structure's thermal radiation. The researchers' new paper adds another layer of periodicity: swatches of sail fabric lashed together in a grid.
With the spacing of the holes matching the wavelength of light and the spacing of the swatches matching the wavelength of thermal emission, the sail could withstand an even more powerful initial push, reducing the amount of time the lasers would need to stay on their target.
"A few years ago, even thinking or doing theoretical work on this type of concept was considered far-fetched," Jariwala says. "Now, we not only have a design, but the design is grounded in real materials available in our labs. Our plan for the future would be to make such structures at small scales and test them with high-power lasers."
Why, we have just the thing.
https://www.architecturaldigest.com/story/mit-plastic-stronger-than-steel
I remember that article, but it doesn’t say anything about withstanding high temperature/heat. Definitely deserves a look, though.
I’m thinking of meteorites bouncing off of it. Maybe they can put a heatshield in front of the sail.
Don’t be like the Greek God Icarus, who flew too close to the Sun while using his handcrafted Waxen Wings.
It’s a lesson you only learn once.
bkmk
Sounds of giverment munnny.
Next up a giant flashlight tied to the ass end pointing backwards under the premise that action and reaction will apply to photons.7
Or the world's madness is driving them Crazy Eddie.
I don’t remember if I listened to that audiobook. I know I listened to nearly everything related to Ringworld.
Imagine the mass of all the shielding, not to mention the effect of things bouncing off if it (deceleration). It would completely destroy the concept of the lightsail. Better to let things pass right through.
Beat me to it. Great book series.
How does it slow down?
So, 800,000 years to reach Alpha Centauri by sail ship.
At the half way mark, wouldn’t the photons from AC work against the solar photons? I guess we’ll have to wait 400,000 years to find out
That would suck, wouldn’t it?
With the speeds of objects in space, there would only be impacts.
Only, theoretically suck, but yes.
Square riggers could sail the trade winds, “downhill” or “before the wind”. Much harder to go into the wind without “tacking” a zig zag course.
“Maybe they can put a heatshield in front of the sail”.
Or make a spinnaker out of “Flex Tape”?
A sail such as this one could be made of aluminized mylar—and put into a synchronized solar orbit—limiting any heat-gain on planet Earth.
(That is, if we can agree on what temperature Earth needs to be).
Hamsters on a wheel... that’s the future of space power 🐹
And how are they going to get data back from it without an antenna? A 3x3 meter aperture (gain 40 dB at 3 GHz) at a 4 LY distance is a sick joke for a radio link budget. But, academicians don’t worry their little Marx beards about such trivia as the ability to send radio signals back from a star probe.
Disclaimer: Opinions posted on Free Republic are those of the individual posters and do not necessarily represent the opinion of Free Republic or its management. All materials posted herein are protected by copyright law and the exemption for fair use of copyrighted works.