Posted on 03/03/2007 3:03:44 AM PST by neverdem
The velvet background on a painting of Elvis looks black because it reflects so little light. But getting a surface to reflect no light at all is surprisingly difficult. Now, researchers have created a virtually reflectionfree surface by coating it with filaments only a few billionths of a meter thick.
 |
|
REFLECTIONFREE. Aluminum nitride coated with antireflection filaments appears nearly black (top left), while samples of aluminum nitride, silicon, and aluminum (from second left to right) reflect much more light. An electron micrograph of the coating (bottom) shows the layers of filaments that make the coating nonreflective. |
Improved antireflective surfaces might have many uses. For example, they could eliminate light-wasting reflections in fiber-optic telecommunications, or the surfaces could brighten low-power light-emitting diode (LED) lamps.
Applied to a clear surface, the coating would make a lens absorb more light, increasing its transparency. On an opaque surface, the filaments would make a silicon solar cell, for example, almost perfectly absorbing.
The coating creates "really a new class of materials," says E. Fred Schubert, a member of the research team at Rensselaer Polytechnic Institute in Troy, N.Y.
Schubert and his colleagues set out to minimize light's reflections. Light rebounds when it strikes the boundary between two materials that have different "refractive indices"—measures of how fast light travels through the substances. For example, sunlight bounces off the surface of a pond because light travels more slowly in water than in air. The greater the difference between the refractive indices of any two materials, the more light is reflected.
To prevent reflections, the team put a transparent piece of aluminum nitride in a vacuum and coated the surface with five layers of nanoscale filaments made either of silicon dioxide or titanium dioxide. Each layer resembles a rug with the yarns leaning at 45°. Together, the five layers are only about 700 nanometers thick—the wavelength of red light. The individual filaments are 20 to 30 nm wide, the team reports in the March Nature Photonics.
By altering the spacing between the filaments, the scientists gave each layer a slightly different refractive index. The top layer has so much space between filaments that its refractive index is nearly the same as that of air. The filaments in the other four layers are progressively denser, so the layers have increasing refractive indices. The bottom layer's index of 2.15 is the same as that of the underlying surface.
This staggered transition replaces an abrupt boundary with gradual ones, greatly reducing the reflection of light. At its surface, the coating has a refractive index of 1.05, which is close to air's index of 1.0. Even transparent solids such as glass have indices of at least 1.4.
The low-reflection coating works for visible light and all other wavelengths between near ultraviolet and near infrared.
"It certainly is an improvement over the existing state of the art," comments Sri Sridhar, who studies nanophotonics at Northeastern University in Boston.
The current coating has a faint blue tinge, however. Schubert says that this results from diffraction, not reflection. He explains that the thickness of the layers happens to equal the wavelength of the blue light. His team is currently making the layers thinner to avoid this problem.
| If you have a comment on this article that you would like considered for publication in Science News, send it to editors@sciencenews.org. Please include your name and location. |
To subscribe to Science News (print), go to
https://www.kable.com/pub/scnw/ subServices.asp.
To sign up for the free weekly e-LETTER from Science News, go to
http://www.sciencenews.org/pages/subscribe_form.asp.
References:
Xi, J.Q. . . . E.F. Schubert, et al. In press. Optical thin-film materials with low refractive index for broadband elimination of fresnel reflection. Nature Photonics.
Further Readings:
Cunningham, A. 2005. Fog be gone: Nanocoating clarifies the view. Science News 168(Sept. 3):148. Available at http://www.sciencenews.org/articles/20050903/fob4.asp.
Sources:
E. Fred Schubert
Future Chips Constellation
Rensselaer Polytechnic Institute
110 8th Street
Troy, NY 12180
Srinivas Sridhar
Northeast University
360 Huntington Avenue
Boston, MA 02115
http://www.sciencenews.org/articles/20070303/fob3.asp |
|
|
|
|
From Science News, Vol. 171, No. 9, March 3, 2007, p. 132. |
|
|
|
|
|
|
Copyright (c) 2007 Science Service. All rights reserved. |
|
L
Did not read the article but have a ????.
If I paint the new rig in this nanoblack will it be like an invisable shield to the radar guns?
Not that I speed just would be less stressful not constanly worrying if I am doing 38 in the 35 zone.
Fine. This could improve lighting and window insulation.
Great for reducing energy use.
Oh,did the dems or rinos in congress "give" us this great advancement?
New Nanocoating Is Virtual Black Hole for Reflections
PhysOrg
Totally cool.
Emo Freepers are ready for a new black.
My #5 links to a thread on a different article on this topic, which contains lots of such speculation.What seems clear from this article, tho, is that the morphology of this coating is tailored to the visible spectrum plus near-IR and near-UV.
Plus, I don't think this thing is a paint but a complicated 4-layer application in a vacuum.
bump
Thanks for the link.
There is only one Emo.
So what is going to keep this surface from being abraded away quickly? You can wipe 700 nanometers of paint off with your fingernail.
bump
Disclaimer: Opinions posted on Free Republic are those of the individual posters and do not necessarily represent the opinion of Free Republic or its management. All materials posted herein are protected by copyright law and the exemption for fair use of copyrighted works.