Skip to comments.Immensa and CCC’s make breakthrough for concrete formwork using large format 3D printing
Posted on 08/05/2018 1:31:45 PM PDT by 2ndDivisionVet
UAE and Greek companies claim world first tech allows architects to become industrys master builders
UAE-based 3D printing company Immensa Technology Labs has released the result of a joint effort with Consolidated Contractors Company (CCC) to recover a series of concrete casting techniques with the aid of large-format 3D printing.
In what the two companies claim is a world-first, a Sensorial Adaptive Concrete Screen was developed with NOWlab, the innovation department of Berlin-based BigRep. The screen showcases techniques that once belonged to skilled craftsman but have had life breathed back into them through expert digital fabrication. According to a statement by Immensa, it sheds light on 3D printing as the tool that will allow architects to become the master builders of the 21st century and enable direct control of the 1:1 production of their designs.
Fahmi Al-Shawwa, CEO Immensa, said: This breakthrough signals the immense potential that 3D-printed formwork offers companies to significantly shorten and simplify their studio to site process. It brings proven concrete casting methods back to todays building sites, renewed for the modern era and offering significant added value.
This fulfils Immensas mission to drive innovation in the 3D printing industry and highlight the unique benefits of this manufacturing method to show how it can benefit companies in the construction sector. We are proud to have achieved a world-first in our industry, which strengthens Dubais growing reputation as a global hub for 3D printing in line with the Dubai 3D Printing Strategy.
The Sensorial Adaptive Concrete Screen is made from 3D printed formwork produced on Immensa Labs BigRep ONE 3D printer. The sensor-embedded screen is activated by the simple touch of a hand on the outer surface of the concrete wall, and then turns on and off the functional 3D-printed hexagonal light fixtures in the grid.
Aref Boualwan, manager, M.I.S. and Business Processes Re-engineering at Consolidated Contractors Company, said digitisation of the construction industry, shown through advancements including the Sensorial Adaptive Concrete Screen in collaboration with Immensa, was crucial to meet global needs.
The age of construction and engineering is dramatically changing The sensors in the screen are remarkable activated by the touch of a hand, allowing effectively any piece of concrete to become a switch. Architects now have direct control of the development of their designs this functionalisation of a concrete surface is the first of its kind. The potential impact of this technology is limitless and we are truly proud to present these world-first results with Immensa, Boualwan said.
Ready to be used without additional certification, 3D-printed formwork enables resolutions that cannot be achieved by 3D printing concrete, said Immensa. With large-scale 3D printing technology, such as that of BigRep, companies now have the tools to produce required parts on a grand scale.
Immensa added that its state-of-the-art facility now houses 10 3D printing systems and offers over 30 materials for production. It is equipped to build and manufacture production quality parts, components and one-off prototypes for customers across a variety of industries using a wide range of advanced technologies including Selective Laser Sintering (SLS), Stereo lithography (SLA), Extrusion (FDM), and Material Jetting.
As a building inspector, this technology will put a hurting on the low quality builders. However, the quality builders will need to buy in to 3d, or hybrid their plans and lower their cost/profit to compete. I see the big picture, as in what the consumer can afford. People are cheap when it comes to building new because they want more than they can afford. I wonder if 3d building can understand and deliver the “emotional” aspect of home sales.
Not quite seeing what was done here. Was the concrete itself 3-D printed, or was a mold for the concrete 3-D printed?
Re-reading the article “3D-printed formwork”. The formwork is the mold.
Buildeth me a castle, quickly I beseech thee.
Thou bravest knight of thy shiny alu - min - um as the chaps across the pond say.
And then a shrubbery on two sides with a path down the middle that shall leadeth to the front gate. Oh yes,buildeth a high wall aroundeth it, too.
Oh and diggest me 20-foot wide, 10 feet deepeth moat and fillest it with sharks.
With laser beams firing from their foreheads.
Doest this quickly. And at no costeth to me.
This technology should reduce the cost of building such complex structures a lot. The high end of the market may be where 3D technology grows fastest.
Disclaimer: Opinions posted on Free Republic are those of the individual posters and do not necessarily represent the opinion of Free Republic or its management. All materials posted herein are protected by copyright law and the exemption for fair use of copyrighted works.