Free Republic
Browse · Search
Bloggers & Personal
Topics · Post Article

Skip to comments.

Any 3D Printer Recommendations?
8/8/2019 | Me

Posted on 08/08/2019 9:38:43 AM PDT by amorphous

Looking to upgrade from a XYZ Pro Printer to one that can reach a nozzle temp of 300 C. I've kind of settled on the QIDI Tech X-Max.

Anyone have experience with them or other recommendations?


TOPICS: Hobbies
KEYWORDS: 3d; 3dprinter; 3dprinters; nerds; printer; tech
Navigation: use the links below to view more comments.
first previous 1-2021-4041-59 next last
To: FranklinsTower

Added! Enjoy!

Guys? I’m stepping away from the ‘puter for a while. Any more will be added when I get back...


21 posted on 08/08/2019 10:24:27 AM PDT by null and void (When the only tool you have is a hammer, ALL your problems look like skulls.)
[ Post Reply | Private Reply | To 19 | View Replies]

To: null and void

That’s funny!!!


22 posted on 08/08/2019 10:25:29 AM PDT by Vendome (I've Gotta Be Me https://www.youtube.com/watch?v=BB0ndRzaz2o)
[ Post Reply | Private Reply | To 6 | View Replies]

To: null and void

Sorry to ask such basic questions but,

1. What does being on this Ping List do for me?

2. I’m very new to 3D printing, but I had an idea to print out a kind of gear which I will describe, but I cannot understand how it would successfully print. So, for the sake of explaining, imagine you wanted to print a small wagon wheel. It has a circular interior hub from which spokes extend to an exterior, circular wheel. The spokes attach to the centerline of the hub and wheel. I can visualize how the hub and wheel would print, but the spokes are suspended above the printing surface, so how would I print such a shape? You could attempt to print it vertically, but it still wouldn’t work for some of the spokes, the ones that extend laterally.


23 posted on 08/08/2019 10:27:02 AM PDT by agatheringstorm
[ Post Reply | Private Reply | To 6 | View Replies]

To: null and void

Now if I can just get the damned thing to print the coffee.....


24 posted on 08/08/2019 10:34:38 AM PDT by Still Thinking (Freedom is NOT a loophole!)
[ Post Reply | Private Reply | To 6 | View Replies]

To: agatheringstorm

When you read this, bear in mind I’ve been in manufacturing forever, but am not yet a 3D printer user, so this may just be all bs.

In molding, you have to design in flow paths for the resin if the shape of the part isn’t adequate, that get removed later. Similarly here, you might need to put little risers to support the spokes (maybe not full length, you can probably freespan a little), and trim them off later.

Another application for 3D printing is to make molds for the real parts, or a positive of the part which is then used to make a one-shot or a durable mold. (This is informational, to give you new perspectives on how to use 3D, not that it really helps in your scenario)


25 posted on 08/08/2019 10:40:08 AM PDT by Still Thinking (Freedom is NOT a loophole!)
[ Post Reply | Private Reply | To 23 | View Replies]

To: amorphous

moved from wanhao to creatbot dx.
v. happy.


26 posted on 08/08/2019 10:40:26 AM PDT by Diogenesis ( WWG1WGA)
[ Post Reply | Private Reply | To 1 | View Replies]

To: agatheringstorm

Print it horizontally with thin support structures for the spokes, or vertically with none of the wheel spokes exactly lateral. You should be able to position the wheel so that each spoke is at some angle, other than parallel, to the printing bed.


27 posted on 08/08/2019 10:42:42 AM PDT by amorphous
[ Post Reply | Private Reply | To 23 | View Replies]

To: agatheringstorm

Your wagon wheel will print with support material under the spokes … you remove the support material after the job is complete


28 posted on 08/08/2019 10:42:43 AM PDT by NorthMountain (... the right of the peopIe to keep and bear arms shall not be infringed)
[ Post Reply | Private Reply | To 23 | View Replies]

To: Diogenesis

Will check it out, thanks!


29 posted on 08/08/2019 10:43:56 AM PDT by amorphous
[ Post Reply | Private Reply | To 26 | View Replies]

To: amorphous

See #28


30 posted on 08/08/2019 10:46:59 AM PDT by NorthMountain (... the right of the peopIe to keep and bear arms shall not be infringed)
[ Post Reply | Private Reply | To 27 | View Replies]

To: NorthMountain; agatheringstorm
Yep, and most slicing apps will add the support for you. I'm a support minimalist and prefer to add my own in the design.

Below is a 3/4" BSPT to 1/2" NPT adapter that is still warm. It's in Taulman Nylon 230 which means it can be printed at 230C, which is about all the XYZ Pro is capable of.

Sorry for the fuzzy image. The threads are actually quite good.


31 posted on 08/08/2019 11:03:37 AM PDT by amorphous
[ Post Reply | Private Reply | To 30 | View Replies]

To: null and void

Add me as well...thanks.


32 posted on 08/08/2019 11:17:51 AM PDT by 6ppc (It's torch and pitchfork time)
[ Post Reply | Private Reply | To 6 | View Replies]

To: amorphous

How’s your results with nylon? I’m printing model battleship detail parts (turrets, etc) in ABS at 255 degrees on my Prusa, and it’s going well, but I might be interested in nylon if it was user friendly/durable/etc.

(If not, I’ll just stick with ABS, it seems to get the job done.)

As for the ping list, count me in, if I’m not already.


33 posted on 08/08/2019 11:25:19 AM PDT by Kommodor (Terrorist, Journalist or Democrat? I can't tell the difference.)
[ Post Reply | Private Reply | To 31 | View Replies]

To: null and void

Please add me to this ping list as well. Thanks!


34 posted on 08/08/2019 11:30:24 AM PDT by surely_you_jest
[ Post Reply | Private Reply | To 9 | View Replies]

To: null and void; big'ol_freeper; Impy; SevenofNine; Cletus.D.Yokel; Rummyfan; Liberty Valance; ...
I only 3-D print... bricks--
35 posted on 08/08/2019 11:48:35 AM PDT by Bender2 ("I've got a twisted sense of humor, and everything amuses me." RAH Beyond this Horizon)
[ Post Reply | Private Reply | To 17 | View Replies]

To: null and void

May I be added too, please? Thank you in advance


36 posted on 08/08/2019 12:20:49 PM PDT by This_Dude
[ Post Reply | Private Reply | To 21 | View Replies]

To: W.

Futurama reruns still on the Comedy Channel many mid-mornings - like tomorrow for instance.......


37 posted on 08/08/2019 1:07:17 PM PDT by Intolerant in NJ
[ Post Reply | Private Reply | To 16 | View Replies]

To: amorphous
I don't have experience with the QIDI Tech X-Max but,

You could get an aftermarket printhead, a few different nozzles, and a seperate camera for a fraction of the cost.

I have an Airwolf3D printer similar to the one in the “2 cups, 1 girl” photo posted by null and void. I ‘upgraded’ and saved enough to buy parts for a second much larger printer. 1m^3 is it's potential range but I don't have a heated bed that large.

@ agatheringstorm
One way is to split the part in 2 and melt together with acetone. (if using ABS)

38 posted on 08/08/2019 1:45:04 PM PDT by Hermes37 (If you're not living on the edge, you're taking up too much space!)
[ Post Reply | Private Reply | To 1 | View Replies]

To: Kommodor
(If not, I’ll just stick with ABS, it seems to get the job done.)

Nylon can be difficult to work with, but is much stronger and more flexible than ABS or PLA.

Items I printed in ABS, like pads under furniture feet tend to break and not last long. Nylon is strong and lasts forever. A problem is that if you print with support structures you will spend a lot of time cutting it away. A bonus is that you can die it different colors after printing with clear nylon.

39 posted on 08/08/2019 1:47:34 PM PDT by roadcat
[ Post Reply | Private Reply | To 33 | View Replies]

To: Intolerant in NJ

I’ve got them all on DVD. Just wish Groening was still making more episodes.


40 posted on 08/08/2019 1:48:27 PM PDT by W.
[ Post Reply | Private Reply | To 37 | View Replies]


Navigation: use the links below to view more comments.
first previous 1-2021-4041-59 next last

Disclaimer: Opinions posted on Free Republic are those of the individual posters and do not necessarily represent the opinion of Free Republic or its management. All materials posted herein are protected by copyright law and the exemption for fair use of copyrighted works.

Free Republic
Browse · Search
Bloggers & Personal
Topics · Post Article

FreeRepublic, LLC, PO BOX 9771, FRESNO, CA 93794
FreeRepublic.com is powered by software copyright 2000-2008 John Robinson