Posted on 02/09/2022 7:46:36 AM PST by Red Badger
Inside JET's torus, with superimposed plasma. (UKAEA)
Late last century, the Joint European Torus (JET) near Oxford, UK, churned out 22 megajoules of energy in what was, at the time, a record in fusion power.
Now, experimental upgrades have brought the facility into line with the technology anticipated for a major international project, resulting in the production of nearly three times that amount of power.
The advances are a major step forward for tokamak-based fusion, bringing us ever closer to a balance point where we can harvest a near endless stream of energy without the cost of polluting emissions or large amounts of radioactive waste.
"What we have learned in the past months will make it easier for us to plan experiments with fusion plasmas that generate much more energy than is needed to heat them," says Sibylle Günter, the Scientific Director of the Max Planck Institute for Plasma Physics.
Tokamaks might be the horse to back for reaching this milestone in energy production. Consisting of a relatively simple torus surrounded by a bank of seriously powerful magnets, they facilitate fusion by channeling bursts of hydrogen heated to dissolve into a plasma.
What might sound relatively straight forward though is anything but. Keeping that churning stream of plasma stable long enough to squeeze out enough energy-carrying neutrons requires a lot of fine-tuning in technology.
As part of Europe's 'road map to fusion', projects like JET play a key role in breaking down this litany of obstacles. Though the big game is still yet to come.
An international collaboration called ITER is building the largest tokamak the world has ever seen in southern France – one that could eventually generate a whopping 500 megawatts of power from a mere 50 megawatts of initial heating.
Most research on fusion currently uses common forms of hydrogen with either a single proton in its nucleus (called protium), or a slightly rarer form with a proton and a neutron (called deuterium).
This is good enough to iron out the wrinkles until we've got fusion all worked out. But to really get a bang from our fusion reactor, we'll want an even scarcer resource carrying one more neutron – a form of hydrogen called tritium.
ITER aims to experiment with combinations of tritium and deuterium by 2035, and hopefully achieve self-sustaining plasma reactions that will release more energy than they consume.
It's a lofty goal that will depend on a little guidance from smaller projects like JET.
JET stands out as a tokamak capable of using both of these materials, allowing researchers to get a good start on understanding their unique nuclear characteristics.
In 1997, the project hit a record in energy output in the form of released neutrons, providing the equivalent of 4.4 megawatts of power over an average of 5 seconds.
Since then they've been tinkering with designs, including the replacement of the carbon lining, with a mixture of tungsten and beryllium. While the new material is more resilient and won't act like a hydrogen sponge in ways that carbon can, it does affect the plasma's movement.
Finally, after a great deal of modeling, experiments have confirmed predictions of new limits on energy production from this powerful duo of hydrogen isotopes, breaking the old record with an output of 59 megajoules.
It's still short of anything that can perpetuate ongoing fusion, let alone release more energy than it requires. For that, we'll need something much larger, but it's a significant achievement nonetheless.
"In the latest experiments, we wanted to prove that we could create significantly more energy even under ITER-like conditions," says physicist Athina Kappatou from the Max Planck Institute for Plasma Physics.
Once energy production is in the black, a surplus of neutrons released from the tokamak's churning loop of plasma can be directed onto a thin layer of lithium, which through nuclear fission will break down to provide a more ready source of tritium.
In theory it all sounds so simple. But if we've learned anything from studying fusion, harnessing the Sun's own blueprints for energy generation is anything but a smooth ride.
Thankfully facilities around the world are gradually finding ways around the numerous problems, raising temperatures and working out how to sustain longer reaction times.
Together, we just might yet get the clean, virtually unlimited power source we so desperately need.
Ping!..............
Is that more than 1.21 Gigawatts?
I’d love to see the accident manual for this baby.
“In case of uncontrolled release...”
Back in the day, when the Emergency Broadcast System announcement read “If this had been an actual emergency...”
I would point out that if this WAS an actual emergency, I would likely at that moment be driving rapidly away from the station.
The thing about fusion is it stops....................
Curious to know how much energy was used in getting to that output. More than the output I assume.
What elements are created after the fusion of Hydrogen, Duterium, or Tritium?
Will this be a new nuke waste stream?
I don’t know. Physics classes were a few decades ago.
Helium, so we'll have plenty for our balloons..............
The megajoules unit number 3,600,000.00 MJ converts to 1 GWh, one gigawatt hour.
As near as I can figure, they have produced enough watts to light a 100 watt light bulb for 163 hours.
Who the heck designs a thing like that and where did they get the plans?
No. It is 22 megawatts for 1 second.
A joule is one watt for one second.
I think you mean jigawatts. And yes, we’re going to need this kind of power for our flying cars. 🤣
It depends on how long it took to do it.
A joule is a watt for one second. If they got the whole 22 megajoules in under 18 milliseconds, the answer is “yes”.
In other news... staffing shortages due to persons refusing to be vaccinated after a mandate may have resulted in a minor glitch at the Joint European Torus (JET) near Oxford, UK. No one from the facility was available for comment, but a bright flash loud boom and strange weather phenomena that could be seen from many miles away was noted by those in surrounding areas. Experts are currently weighing in on this new form of lightning's relationship to global warming.
Tokamaks have been around for a few decades, the Soviets made a couple...............
What elements are created after the fusion of Hydrogen, Duterium, or Tritium?
Helium, so we’ll have plenty for our balloons..............
+++++++++++++++++++++++++++++++
Sounds like there will be some leftover neutrons or something.
Is matter converted to energy as in fission?
I am not nocking any of this as I think it’s great.
I am trying to understand it further.
Disclaimer: Opinions posted on Free Republic are those of the individual posters and do not necessarily represent the opinion of Free Republic or its management. All materials posted herein are protected by copyright law and the exemption for fair use of copyrighted works.