Posted on 11/02/2023 10:45:41 AM PDT by Red Badger
NASA astronauts Jasmin Moghbeli (top) and Loral O’Hara (bottom) team up during their first spacewalk for maintenance on the outside of the space station. Credit: NASA TV
NASA astronauts Jasmin Moghbeli and Loral O’Hara concluded their spacewalk today at 2:47 p.m. EST after 6 hours and 42 minutes. Their spacewalk began at 8:05 a.m. Moghbeli, designated extravehicular crew member 1 (EV1), was wearing a suit with red stripes. O’Hara, designated extravehicular crew member 2 (EV 2), was in an unmarked suit.
Moghbeli and O’Hara were able to complete one of the spacewalk’s two major objectives, replacing one of the 12 trundle bearing assemblies on the port solar alpha rotary joint, which allows the arrays to track the Sun and generate electricity to power the station. Mission Control told the station crew that the solar array was functioning well after the bearing replacement. Spacewalkers also removed a handling bar fixture to prepare for future installation of a roll-out solar array and properly configured a cable that was previously interfering with an external camera.
Deferred Tasks and Tool Bag Incident
The astronauts had planned to remove and stow a communications electronics box called the Radio Frequency Group, but there was not enough time during the spacewalk to complete the work. The duo lifted some multilayer insulation to make a better assessment of how to approach the job before replacing the insulation and deferring the task to a future spacewalk.
(From left) Astronauts Jasmin Moghbeli and Loral O’Hara are pictured trying on their spacesuits and testing their suits’ components aboard the space station. Credit: NASA
During the activity, one tool bag was inadvertently lost. Flight controllers spotted the tool bag using external station cameras. The tools were not needed for the remainder of the spacewalk. Mission Control analyzed the bag’s trajectory and determined that risk of recontacting the station is low and that the onboard crew and space station are safe with no action required.
Upcoming Missions and Resupply Launch
Moghbeli and O’Hara are in the midst of a science mission living and working aboard the microgravity laboratory to advance scientific knowledge and demonstrate new technologies for future human and robotic exploration missions, including lunar missions through NASA’s Artemis program.
NASA and SpaceX are now targeting 9:16 p.m. EST on Tuesday, November 7, for the launch of the company’s 29th commercial resupply services mission to the International Space Station. The additional time allows for completion of final prelaunch processing ahead of liftoff of the SpaceX Falcon 9 rocket and cargo Dragon spacecraft from Launch Complex 39A at NASA’s Kennedy Space Center in Florida.
NASA Television coverage of launch will begin at 8:45 p.m. The spacecraft, which is carrying approximately 6,500 pounds of supplies, research, and hardware will arrive at the space station shortly before 12 p.m. Thursday, November 9, with coverage beginning at 10:15 a.m.
Ping!.....................
Hell of a price to pay for being stylish.
I think I will delay having a new roof put on.
I can’t find my socket wrench set. Let me know if it’s up there.
Men don’t lose tools. Apollo 13 would have crashed into the sun with these two idiots.
The 10mm wrench is always missing.................
The FIRST TRANSGENDERS ASTRONAUTS??? WHAT ARE THEY?
“analyzed the bag’s trajectory and determined that risk of recontacting the station is low and that the onboard crew and space station are safe”
So it’s not like dropping a wrench or hammer on your foot down here. The hammer or wrench will just drift away.
It will make a beautiful meteor show!......….......
$20 says there was a 10mm socket in that bag.
See post 7.....
Anybody seen my purse?
Don’t look up!!!.......
“Diversity” strikes again, eh?
And it cost NASA $10,000.
Hope it didn't contain a hammer, travelling 15,000 miles per hour it could do some serious damage to their station on orbit.
White men don’t lose tools in space. Just sayin’.
My thoughts exactly. Where do all the 10mm sockets go?
Disclaimer: Opinions posted on Free Republic are those of the individual posters and do not necessarily represent the opinion of Free Republic or its management. All materials posted herein are protected by copyright law and the exemption for fair use of copyrighted works.