Free Republic
Browse · Search
General/Chat
Topics · Post Article

Skip to comments.

Vanity: Gas range that isn't a piece of junk

Posted on 12/04/2018 6:10:00 PM PST by chrisser

click here to read article


Navigation: use the links below to view more comments.
first 1-2021-4041-6061-80 ... 121-129 next last

1 posted on 12/04/2018 6:10:00 PM PST by chrisser
[ Post Reply | Private Reply | View Replies]

To: chrisser

I’ve bought older stoves. The latest is a Tappan from the 50’s or 60’s. NO ELECTRONICS


2 posted on 12/04/2018 6:13:26 PM PST by meatloaf
[ Post Reply | Private Reply | To 1 | View Replies]

To: chrisser

Sorry, it’s a Whirlpool, although I’m not sure that makes much of a difference.


3 posted on 12/04/2018 6:15:17 PM PST by chrisser
[ Post Reply | Private Reply | To 1 | View Replies]

To: meatloaf

I paid $50 for the Tappan.


4 posted on 12/04/2018 6:15:28 PM PST by meatloaf
[ Post Reply | Private Reply | To 2 | View Replies]

To: chrisser

Maytag is now, unfortunately, owned by Whirlpool.


5 posted on 12/04/2018 6:15:29 PM PST by OKSooner (Whatever happened to, "The midterms are safe."?)
[ Post Reply | Private Reply | To 1 | View Replies]

To: chrisser

Despite the great reputation of Maytag appliances in general, this isn’t the first story I’ve heard of their microprocessor equipped whiz bang stuff being troublesome. My brother had a Maytag washer that blew out control boards on a fairly regular basis @ $350 each. If I lived out in the boonies, I would definitely prefer luddite-grade appliances with no computers in them. The Maytag washers & dryers that I have seen work for twenty plus years are entirely mechanical, turn the knob and push the button. No clock, no display.


6 posted on 12/04/2018 6:16:16 PM PST by Attention Surplus Disorder (Apoplectic is where we want them)
[ Post Reply | Private Reply | To 1 | View Replies]

To: chrisser

We live a lifestyle similar to yours.

The bigger problem you have is if the grid goes down or there’s an EMP. All that modern junk becomes worthless.

I suggest just trying to sell your current POC and get an all mechanical/analog range even if you have to buy an antique. We used a 40 year old gas range for about 10 years that worked perfectly and sold it last year for $150. The one we have now is all mechanical except for the igniters. When the power goes out we use matches to light the burners.


7 posted on 12/04/2018 6:18:37 PM PST by redfreedom (.)
[ Post Reply | Private Reply | To 1 | View Replies]

To: chrisser

Tell us your budget first, then we can give you suggestions on good ranges.

I’ve had good luck with our GE Profile series gas range, but you’re going to pay $2,000+ for a 30” free standing single oven unit today. (Ours cost $800 in 1996)

If you want to spend $400 on a gas range, you’re going to get $400 worth of range.

You probably already know, but you’ll also need to re-jet the range for propane. They usually come jetted for natural gas, and will run very poorly on propane if not re-jetted. (Some ranges come with the LP conversion kit included.)


8 posted on 12/04/2018 6:18:52 PM PST by Yo-Yo (Is the /sarc tag really necessary?)
[ Post Reply | Private Reply | To 1 | View Replies]

To: chrisser

Was the gas oven you bought rated to run on propane? There is a difference.


9 posted on 12/04/2018 6:20:36 PM PST by DoubleNickle
[ Post Reply | Private Reply | To 1 | View Replies]

To: chrisser

Sorry to hear of your troubles. We bought a Samsung a few years ago and aside from the knobs being a little cheap I love it. It has a continuous top, a griddle, convection bake and roast, and a a dehydrating cycle.

Can any gas stove be converted to propane?

This is just about the same model, but we got ours on a great sale. You might find it elsewhere for less?

Good luck!

https://www.bestbuy.com/site/questions/samsung-5-8-cu-ft-self-cleaning-freestanding-gas-convection-range-stainless-steel/3995004


10 posted on 12/04/2018 6:21:17 PM PST by CaptainPhilFan
[ Post Reply | Private Reply | To 1 | View Replies]

To: DoubleNickle

Oven we have came with a propane kit to rejet.


11 posted on 12/04/2018 6:22:25 PM PST by chrisser
[ Post Reply | Private Reply | To 9 | View Replies]

To: chrisser

To be perfectly blunt about it, there’s a huge market crying out for the solid quality and simplicity of the products of yesteryear. Blenders, gas stoves, refrigerators, office chairs, jigsaws — everything under the sun. As it is, Chinese mainland manufacturers crank out a vast flood of junk that fails quickly and demands unending repairs. American companies that value quality have fallen by the wayside. I’ve been watching this phenomenon spread like cancer for more than twenty years, and it’s depressing as hell. -_-


12 posted on 12/04/2018 6:22:33 PM PST by Sarcasm Factory
[ Post Reply | Private Reply | To 1 | View Replies]

To: chrisser

Did you change out the coupling/adapters for ones that will convert the usage from natural gas to propane? Check out any number of videos on youtube: Converting A Natural Gas Stove To Propane

You have to get the oxygen mix to be what it needs to be by manipulating a few things on a factory direct natural gas stove.


13 posted on 12/04/2018 6:23:02 PM PST by Be Careful
[ Post Reply | Private Reply | To 1 | View Replies]

To: chrisser

My old Viking finally died after 20 years.

Bought a Samsung, the one rated #1 by Consumer Reports.

Excellent piece of gear.


14 posted on 12/04/2018 6:23:27 PM PST by RedStateRocker (Nuke Mecca. Deport all illegals. Abolish the DEA, IRS and ATF,.)
[ Post Reply | Private Reply | To 1 | View Replies]

To: chrisser
Call the nearest Home Depot, ask for Appliances, and set up an appointment. That way he or she has time only for you, not getting pulled in five different directions. Lot of good deals right now.
15 posted on 12/04/2018 6:24:02 PM PST by real saxophonist (One side has guns and training. Other side's primary concern is 'gender identity'. Who's gonna win?)
[ Post Reply | Private Reply | To 1 | View Replies]

To: Yo-Yo

Budget wise, we bought the nicest basic range at Lowes that didn’t have a bunch of extra gizmos. We thought convection was just one more thing to break and most models above the one we bought were convection or larger than the opening in the counter (standard 30”). Their weren’t any purely mechanical ones on the floor.

I wouldn’t be opposed to paying more if we could be confident it would work reliably.


16 posted on 12/04/2018 6:25:07 PM PST by chrisser
[ Post Reply | Private Reply | To 8 | View Replies]

To: chrisser

The best stove that I have had (for the past 6 years) is my GE profile convection oven with a second oven in the bottom.

I am a cook and yes it was pricey but has been totally worth it. It has 6 burners of various type, comes with a Lodge griddle that fits onto 3 of the burners. Yes, it is electronic, but I also put in a surge protector to protect the computer part of it during a power surge. When I had a service guy out for a minor repair, he was impressed that I had that. He thought that it was brilliant. If the power goes out you can still light the oven and the burners with a match.

It does have the built-in oven cleaner which I have never used because I have heard that it is very hard on the oven since it heats it to an incredibly high heat which basically destroys the oven. ( Was told that by more than once trustworthy source and that after 5-6 cleanings you can kiss that oven goodbye.)

We are selling our house. We will be replacing my stove with a much more economical stove and taking that one with us. I am not parting with that stove. While I would love to get a Wolfe, that is not in our budget. So I will will make do with my GE.


17 posted on 12/04/2018 6:27:59 PM PST by notpoliticallycorewrecked (Will the last responsible person leaving California, please turn out the lights.)
[ Post Reply | Private Reply | To 1 | View Replies]

To: chrisser

Our Wolf gas range is five years old and gets heavy use every day. No problems so far.


18 posted on 12/04/2018 6:30:55 PM PST by clintonh8r (Truth is hate speech to those who hate the truth.)
[ Post Reply | Private Reply | To 1 | View Replies]

To: Be Careful

I watched several vids and followed the instructions in the manual.

When it works, the burner the flame has good color and it heats up quickly. Because it wasn’t generating a code previously, it was a little difficult to troubleshoot until I found the service manual online. Essentially, the gas valve has a “safety” feature where it detects the amperage draw of the ignitor. So the ignitor can glow red hot, but if it isn’t within range, or drifts in and out, the safety valve will shut the gas off. That and the control boards are notoriously craptastic. Once I found the specs and got myself an amp clamp, I was able to identify that the ignitor was the root cause.

But now the new control board is throwing an error indicating it’s either the touchpad or the board itself. I’m pretty certain the old board was working, and I can probably put it back in, but it seems like a fool’s errand to keep chasing these problems.


19 posted on 12/04/2018 6:31:42 PM PST by chrisser
[ Post Reply | Private Reply | To 13 | View Replies]

To: chrisser

The last Maytag drier we bought was a hunk of junk. Bunch of plastic pieces that broke all the time.


20 posted on 12/04/2018 6:34:21 PM PST by kaehurowing
[ Post Reply | Private Reply | To 1 | View Replies]


Navigation: use the links below to view more comments.
first 1-2021-4041-6061-80 ... 121-129 next last

Disclaimer: Opinions posted on Free Republic are those of the individual posters and do not necessarily represent the opinion of Free Republic or its management. All materials posted herein are protected by copyright law and the exemption for fair use of copyrighted works.

Free Republic
Browse · Search
General/Chat
Topics · Post Article

FreeRepublic, LLC, PO BOX 9771, FRESNO, CA 93794
FreeRepublic.com is powered by software copyright 2000-2008 John Robinson